COPRAR Container discharge/loading order

TBG3 Transport

A message to order to the container terminal that the containers specified have to be discharged from a seagoing vessel or have to be loaded into a seagoing vessel.

This message is part of a total set of container-related messages. These messages serve to facilitate the intermodal handling of containers by streamlining the information exchange. The business scenario for the container messages is clarified in a separate document, called: 'Guide to the scenario of EDIFACT container messages'.

Send feedback Share via email

Header

Position
Segment
Name
Max use

  1. To head, identify and specify a message.

  2. To indicate the type and function of a message and to transmit the identifying number.

  3. To specify date, and/or time, or period.

  4. To provide free form or coded text information.

  5. Segment group 1
    Repeat 9

    1. To specify a reference.

    2. To specify date, and/or time, or period.

  6. Segment group 2
    Repeat 1

    1. To specify information regarding the transport such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport.

      040 D5(040,030) If first, then all

    2. To specify date, and/or time, or period.

    3. To specify a reference.

    4. Segment group 3
      Repeat 9

      1. To identify a place or a location and/or related locations.

      2. To specify date, and/or time, or period.

    5. To provide free form or coded text information.

  7. Segment group 4
    Repeat 9

    1. To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

    2. Segment group 5
      Repeat 9

      1. To identify a person or a department to whom communication should be directed.

      2. To identify a communication number of a department or a person to whom communication should be directed.

  8. Segment group 6
    Repeat 9999

    1. To identify a unit of equipment.

    2. To specify a reference.

    3. To specify the number of units.

    4. To specify operational transport movement details for a goods item or equipment (which may differ from the contractual conditions).

    5. To specify date, and/or time, or period.

    6. To identify a place or a location and/or related locations.

    7. To specify physical measurements, including dimension tolerances, weights and counts.

    8. To specify dimensions.

    9. Segment group 7
      Repeat 9

      1. To specify the temperature setting.

      2. To identify a range.

    10. To specify the seal number or a range of seal numbers.

    11. To provide free form or coded text information.

    12. To specify percentage information.

    13. Segment group 8
      Repeat 99

      1. To identify dangerous goods.

      2. To provide free form or coded text information.

      3. To specify physical measurements, including dimension tolerances, weights and counts.

      4. Segment group 9
        Repeat 9

        1. To identify a person or a department to whom communication should be directed.

        2. To identify a communication number of a department or a person to whom communication should be directed.

    14. To specify attached or related equipment.

    15. To specify handling and where necessary, notify hazards.

    16. Segment group 10
      Repeat 1

      1. To specify information regarding the transport such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport.

        040 D5(040,030) If first, then all

      2. To specify date, and/or time, or period.

      3. To specify a reference.

      4. Segment group 11
        Repeat 9

        1. To identify a place or a location and/or related locations.

        2. To specify date, and/or time, or period.

    17. To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

  9. To provide control total.

  10. To end and check the completeness of a message.

    1. 0062, the value shall be identical to the value in 0062 in the
    corresponding UNH segment.
Stedi.comDocumentationContact us

Stedi is a registered trademark of Stedi, Inc. Stedi's EDI Reference is provided for marketing purposes and is free of charge. All names, logos, and brands of third parties listed on our site are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Our use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.