COSTCO Container stuffing/stripping confirmation

TBG3 Transport

Confirmation that specified goods/consignments have been stuffed into or stripped from LCL-containers. This message is part of a total set of container-related messages. These messages serve to facilitate the intermodal handling of containers by streamlining the information exchange. The business scenario for the container messages is clarified in a separate document, called: 'Guide to the scenario of EDIFACT container messages'.

Send feedback Share via email

Header

Position
Segment
Name
Max use

  1. A service segment starting and uniquely identifying a message. The message type code for the Container stuffing/stripping confirmation message is COSTCO. Note: Container stuffing/stripping confirmation messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 COSTCO 0052 D 0054 21A 0051 UN

    1. Data element S009/0057 is retained for upward compatibility. The use of
    S016 and/or S017 is encouraged in preference.
    2. The combination of the values carried in data elements 0062 and S009 shall
    be used to identify uniquely the message within its group (if used) or if
    not used, within its interchange, for the purpose of acknowledgement.

  2. A segment to indicate the beginning of a message and to transmit identifying number and the further specification of the message type (in data element 1001: Document name code), such as Stuffing confirmation, Stripping confirmation.

  3. A segment to indicate date and/or time applying to the whole message, such as date and time of document or message issue.

  4. A segment to specify free form or processable supplementary information, such as: - change Information

  5. Segment group 1
    Repeat 9

    1. A segment to express a reference which applies to the entire message, such as: - reference to previous message - stuffing/stripping order reference - (sea) booking reference number

    2. A segment to indicate date and/or time related to the reference.

  6. Segment group 2
    Repeat 1

    1. A segment to indicate the main carriage stage of the transport, such as carrier/liner service; also vessel/voyage details or inland transport details can be specified.

      040 D5(040,030) If first, then all

    2. A segment to indicate date(s) and time(s) related to the main carriage.

    3. A segment to specify an additional reference related to transport details

    4. Segment group 3
      Repeat 9

      1. A segment to indicate a place/port corresponding to the transport stage.

      2. A segment to specify date(s) and time(s) related to a location.

  7. Segment group 4
    Repeat 9

    1. A segment to identify the party's name, address, and function, such as: - carrier agent (sea) - message recipient - message sender

    2. Segment group 5
      Repeat 9

      1. A segment to identify a person or department for contact purposes, such as: - information contact

      2. A segment to identify a communication number of a person or department to whom communication should be directed.

  8. Segment group 6
    Repeat 99999

    1. A segment to specify container prefix and number, container size and type and other details.

    2. A segment to provide a reference relating to the equipment, such as: - container sequence number

    3. A segment to specify the actual stuffing/stripping date/time.

    4. A segment to specify special instructions and/or services regarding the container, such as: - off-dimensions

    5. - off-standard dimensions front - off-standard dimensions rear - off-standard dimensions right - off-standard dimensions left - off-standard dimensions general (including length, width and height) - external equipment dimensions

    6. A segment to identify seal and seal issuer associated with the container, such as consolidator and carrier (sea).

    7. A segment to specify attached equipment, such as: - chassis - clip-on units such as generator sets

    8. A segment to specify handling instructions related to the container equipment.

    9. A segment to specify a characteristic property of the transport unit.

    10. A segment to specify a related address or party, such as: - container operator

    11. Segment group 7
      Repeat 999

      1. A segment to specify dangerous goods.

      2. A segment to specify an additional dangerousgoods attribute relating to this hazard such as such as UNDG extension code, proper shipping name or others.

      3. A segment to specify supplementary details regarding the dangerous goods such as the technical name of the dangerous goods etc.

      4. A segment to specify measurements of the dangerous goods, such as: - net net weight.

      5. Segment group 8
        Repeat 9

        1. A segment to identify a person or department to be contacted regarding the dangerous goods.

        2. A segment to specify communication details of the contact specified in the CTA segment.

    12. Segment group 9
      Repeat 9

      1. A segment to specify the type of transport related temperature such as storage, transport or operating temperature and also to optionally specify a single value temperature setting.

      2. A segment to optionally specify the transport related temperature as a range of values.

  9. Segment group 10
    Repeat 99999

    1. A segment to indicate a stuffed or stripped consignment.

    2. A segment to identify a reference to an LCL-consignment, such as: - booking reference number (sea transport)

    3. Segment group 11
      Repeat 99999

      1. A segment to identify a stuffed or stripped goods item. A goods item can be identified by a goods item number, number and type of packages.

      2. A segment to specify handling instructions relating to the goods item, such as: - hazardous cargo.

      3. Segment group 12
        Repeat 9

        1. A segment to specify the actual temperature setting for the goods item.

        2. A segment to specify the actual temperature range setting for the goods item.

      4. A segment to describe the goods item.

      5. A segment to specify measurements, other than dimensions, applicable to a goods item, such as: - gross weight - gross measurement/cube

      6. A segment to specify marks and numbers of a goods item.

      7. A segment to specify a document prepared for a goods item, such as relevant permits.

      8. Segment group 13
        Repeat 999

        1. A segment to identify the containers in which goods are (were) transported.

        2. A segment to specify the gross weight of that portion of the goods item in the container.

      9. Segment group 14
        Repeat 999

        1. A segment to indicate the dangerous goods regulations for the corresponding mode of transport, class of dangerous goods, additional dangerous goods code, UN-number and shipment flash point.

        2. A segment to specify an additional dangerousgoods attribute relating to this hazard such as such as UNDG extension code, proper shipping name or others.

        3. A segment to specify the dangerous goods technical name and to specify any additional dangerous goods information.

        4. A segment to specify measurements of the dangerous goods, such as: - Net net weight

        5. Segment group 15
          Repeat 9

          1. A segment to identify a person or department to be contacted regarding the dangerous goods.

          2. A segment to specify communication details of the contact specified in the CTA segment.

        6. Segment group 16
          Repeat 999

          1. A segment to identify the containers in which the dangerous goods are (were) transported.

          2. A segment to specify the net net weight of that portion of the dangerous goods in the equipment.

  10. A segment to specify the number of containers in the message, explicitly given by the sender.

  11. A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message.

    1. 0062, the value shall be identical to the value in 0062 in the
    corresponding UNH segment.
Stedi.comDocumentationContact us

Stedi is a registered trademark of Stedi, Inc. Stedi's EDI Reference is provided for marketing purposes and is free of charge. All names, logos, and brands of third parties listed on our site are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Our use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.