COSTCO Container stuffing/stripping confirmation

D4 Transport (SWG)

Confirmation that specified goods/consignments have been stuffed into or stripped from LCL-containers. This message is part of a total set of container-related messages. These messages serve to facilitate the intermodal handling of containers by streamlining the information exchange. The business scenario for the container messages is clarified in a separate document, called: 'Guide to the scenario of EDIFACT container messages'.

Send feedback Share via email

Header

Position
Segment
Name
Max use

  1. To head, identify and specify a message.

    1. Data element S009/0057 is retained for upward compatibility. The use of
    S016 and/or S017 is encouraged in preference.
    2. The combination of the values carried in data elements 0062 and S009 shall
    be used to identify uniquely the message within its group (if used) or if
    not used, within its interchange, for the purpose of acknowledgement.

  2. To indicate the type and function of a message and to transmit the identifying number.

  3. To specify date, and/or time, or period.

  4. To provide free form or coded text information.

  5. Segment group 1
    Repeat 9

    1. To specify a reference.

    2. To specify date, and/or time, or period.

  6. Segment group 2
    Repeat 1

    1. To specify the transport details such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport. The segment may be pointed to by the TPL segment.

    2. To specify date, and/or time, or period.

    3. Segment group 3
      Repeat 9

      1. To identify a place or a location and/or related locations.

      2. To specify date, and/or time, or period.

  7. Segment group 4
    Repeat 9

    1. To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

    2. Segment group 5
      Repeat 9

      1. To identify a person or a department to whom communication should be directed.

      2. To identify a communication number of a department or a person to whom communication should be directed.

  8. Segment group 6
    Repeat 999

    1. To identify a unit of equipment.

    2. To specify a reference.

    3. To specify date, and/or time, or period.

    4. To specify the contract and carriage conditions and service and priority requirements for the transport.

    5. To specify dimensions.

    6. To specify the seal number or a range of seal numbers.

    7. To specify attached or related equipment.

    8. To specify handling and where necessary, notify hazards.

    9. To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

    10. Segment group 7
      Repeat 99

      1. To identify dangerous goods.

      2. To provide free form or coded text information.

      3. To specify physical measurements, including dimension tolerances, weights and counts.

      4. Segment group 8
        Repeat 9

        1. To identify a person or a department to whom communication should be directed.

        2. To identify a communication number of a department or a person to whom communication should be directed.

    11. Segment group 9
      Repeat 9

      1. To specify the temperature setting.

      2. To identify a range.

  9. Segment group 10
    Repeat 999

    1. To identify one consignment.

    2. To specify a reference.

    3. Segment group 11
      Repeat 999

      1. To indicate totals of a goods item.

      2. To specify handling and where necessary, notify hazards.

      3. Segment group 12
        Repeat 9

        1. To specify the temperature setting.

        2. To identify a range.

      4. To provide free form or coded text information.

      5. To specify physical measurements, including dimension tolerances, weights and counts.

      6. To specify markings and labels on individual packages or physical units.

      7. To identify documents and details directly related to it.

      8. Segment group 13
        Repeat 999

        1. To specify the placement of goods in relation to equipment.

        2. To specify physical measurements, including dimension tolerances, weights and counts.

      9. Segment group 14
        Repeat 99

        1. To identify dangerous goods.

        2. To provide free form or coded text information.

        3. To specify physical measurements, including dimension tolerances, weights and counts.

        4. Segment group 15
          Repeat 9

          1. To identify a person or a department to whom communication should be directed.

          2. To identify a communication number of a department or a person to whom communication should be directed.

        5. Segment group 16
          Repeat 999

          1. To specify the placement of goods in relation to equipment.

          2. To specify physical measurements, including dimension tolerances, weights and counts.

  10. To provide control total.

  11. To end and check the completeness of a message.

    1. 0062, the value shall be identical to the value in 0062 in the
    corresponding UNH segment.
Stedi.comDocumentationContact us

Stedi is a registered trademark of Stedi, Inc. Stedi's EDI Reference is provided for marketing purposes and is free of charge. All names, logos, and brands of third parties listed on our site are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Our use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.