COPARN Container announcement

Joint Transport Group (JM4)

The message contains an order to release, to make available, to accept or to call down containers or to announce the impending arrival of containers.

This message is part of a total set of container-related messages. These messages serve to facilitate the intermodal handling of containers by streamlining the information exchange. The business scenario for the container messages is clarified in a separate document, called: 'Guide to the scenario of EDIFACT container messages'.

The order may pertain to cargo related containers (full container load and less than container load), the arrangement of empty containers prior to loading and after stripping, as well as the arrangements for leasing the empty containers (on-hire and off-hire of containers).

Send feedback Share via email

Header

Position
Segment
Name
Max use

  1. To head, identify and specify a message.

  2. To indicate the type and function of a message and to transmit the identifying number.

  3. To specify operational transport movement details for a goods item or equipment (which may differ from the contractual conditions).

  4. To specify date, and/or time, or period.

  5. To specify the contract and carriage conditions and service and priority requirements for the transport.

  6. To provide free form or coded text information.

  7. To identify a place or a location and/or related locations.

  8. Segment group 1
    Repeat 9

    1. To specify a reference.

    2. To specify date, and/or time, or period.

  9. Segment group 2
    Repeat 9

    1. To specify the transport details such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport. The segment may be pointed to by the TPL segment.

    2. To specify a reference.

    3. To identify a place or a location and/or related locations.

    4. To specify date, and/or time, or period.

  10. Segment group 3
    Repeat 9

    1. To specify the name/address and their related function, either by CO82 only and/or unstructured by CO58 or structured by CO80 thru 3207.

    2. Segment group 4
      Repeat 9

      1. To identify a person or a department to whom communication should be directed.

      2. To identify a communication number of a department or a person to whom communication should be directed.

    3. To specify a reference.

    4. To specify date, and/or time, or period.

  11. Segment group 5
    Repeat 999

    1. To indicate totals of a goods item.

    2. To specify handling and where necessary, notify hazards.

    3. To provide free form or coded text information.

    4. To specify a reference.

    5. To specify additional or substitutional item identification codes.

    6. Segment group 6
      Repeat 99

      1. To specify the name/address and their related function, either by CO82 only and/or unstructured by CO58 or structured by CO80 thru 3207.

      2. To specify date, and/or time, or period.

      3. To specify a reference.

    7. To specify physical measurements, including dimension tolerances, weights and counts.

    8. To specify dimensions.

    9. To identify documents and details directly related to it.

    10. Segment group 7
      Repeat 999

      1. To specify the placement of goods in relation to equipment.

      2. To specify physical measurements, including dimension tolerances, weights and counts.

    11. Segment group 8
      Repeat 9

      1. To identify dangerous goods.

      2. To provide free form or coded text information.

      3. To specify physical measurements, including dimension tolerances, weights and counts.

  12. Segment group 9
    Repeat 9999

    1. To identify a unit of equipment.

    2. To specify a reference.

    3. To specify the number of units.

    4. To specify operational transport movement details for a goods item or equipment (which may differ from the contractual conditions).

    5. To specify date, and/or time, or period.

    6. To specify the contract and carriage conditions and service and priority requirements for the transport.

    7. To identify a place or a location and/or related locations.

    8. To specify physical measurements, including dimension tolerances, weights and counts.

    9. To specify dimensions.

    10. To specify the temperature setting.

    11. To identify a range.

    12. To specify the seal number or a range of seal numbers.

    13. To provide free form or coded text information.

    14. To specify percentage information.

    15. To identify dangerous goods.

    16. To specify a monetary amount.

    17. To indicate the requirement for a specific governmental action and/or procedure or which specific procedure is valid for a specific part of the transport.

    18. To specify attached or related equipment.

    19. To specify handling and where necessary, notify hazards.

    20. Segment group 10
      Repeat 9

      1. To specify damage including action taken.

      2. To provide component details of an object (e.g. product, container) such as its type and the material of which it is composed.

    21. Segment group 11
      Repeat 9

      1. To specify the transport details such as mode of transport, means of transport, its conveyance reference number and the identification of the means of transport. The segment may be pointed to by the TPL segment.

      2. To identify a place or a location and/or related locations.

      3. To specify date, and/or time, or period.

    22. Segment group 12
      Repeat 9

      1. To specify the name/address and their related function, either by CO82 only and/or unstructured by CO58 or structured by CO80 thru 3207.

      2. To specify date, and/or time, or period.

      3. To identify a person or a department to whom communication should be directed.

      4. To identify a communication number of a department or a person to whom communication should be directed.

      5. To specify a reference.

  13. To provide control total.

  14. To end and check the completeness of a message.

Stedi.comDocumentationContact us

Stedi is a registered trademark of Stedi, Inc. Stedi's EDI Reference is provided for marketing purposes and is free of charge. All names, logos, and brands of third parties listed on our site are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Our use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.