CONDRO Drawing organisation

TBG6 Architecture, Engineering and Construction

The message CONDRO is intended to describe the general (project) organisation and structure, valid for a whole project or environment.

The whole process of exchanging engineering or CAD (Computer Aided Design) files between different parties within one project will be supported by EDIFACT messages. The message CONDRO is one of these messages.

Header

Position
Segment
Name
Max use
  1. To head, identify and specify a message.

    1. Data element S009/0057 is retained for upward compatibility. The use of
    S016 and/or S017 is encouraged in preference.
    2. The combination of the values carried in data elements 0062 and S009 shall
    be used to identify uniquely the message within its group (if used) or if
    not used, within its interchange, for the purpose of acknowledgement.
  2. To indicate the type and function of a message and to transmit the identifying number.

  3. To specify date, and/or time, or period.

  4. To specify results of the application of an authentication procedure.

  5. To specify the agreement details.

  6. To provide free form or coded text information.

  7. Segment group 1
    Repeat 5
    1. To specify a reference.

    2. To identify documents and details directly related to it.

    3. To specify date, and/or time, or period.

    4. To provide free form or coded text information.

  8. Segment group 2
    Repeat 999
    1. To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.

    2. To identify a place or a location and/or related locations.

    3. To provide free form or coded text information.

    4. Segment group 3
      Repeat 10
      1. To specify a reference.

      2. To give a precise definition of all necessary elements belonging to the configuration of a computer system like hardware, firmware, operating system, communication (VANS, network type, protocol, format) and application software.

      3. To specify date, and/or time, or period.

    5. Segment group 4
      Repeat 10
      1. To identify a person or a department to whom communication should be directed.

      2. To identify a communication number of a department or a person to whom communication should be directed.

      3. To identify a place or a location and/or related locations.

  9. Segment group 5
    Repeat 999
    1. To identify documents and details directly related to it.

    2. To specify parties to an instruction, the instruction, or both.

    3. To specify a reference.

    4. To specify physical measurements, including dimension tolerances, weights and counts.

    5. Segment group 6
      Repeat 99
      1. To specify the link of one non-EDIFACT external file to an EDIFACT message.

      2. To give a precise definition of all necessary elements belonging to the configuration of a computer system like hardware, firmware, operating system, communication (VANS, network type, protocol, format) and application software.

      3. To specify date, and/or time, or period.

  10. Segment group 7
    Repeat 100000
    1. A segment used to convey an indexing structure mechanism which identifies the positioning of a group or item.

    2. To identify processing information.

    3. To specify date, and/or time, or period.

    4. To describe an item in either an industry or free format.

    5. To specify a reference.

    6. To specify a pertinent quantity.

    7. Segment group 8
      Repeat 1
      1. To identify a place or a location and/or related locations.

      2. To specify dimensions.

      3. To specify a pertinent quantity.

      4. To specify physical measurements, including dimension tolerances, weights and counts.

  11. To end and check the completeness of a message.

    1. 0062, the value shall be identical to the value in 0062 in the
    corresponding UNH segment.

Stedi is a registered trademark of Stedi, Inc. Stedi's EDI Reference is provided for marketing purposes and is free of charge. All names, logos, and brands of third parties listed on our site are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Our use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.