CONDRO Drawing organisation

D7 Architecture, Engineering and Construction (SWG)

The message CONDRO is intended to describe the general (project) organisation and structure, valid for a whole project or environment.

The whole process of exchanging engineering or CAD (Computer Aided Design) files between different parties within one project will be supported by EDIFACT messages. The message CONDRO is one of these messages.

Send feedback Share via email

Header

Position

Segment

Name

Max use

0010Message headerMandatory->Max 1
To head, identify and specify a message.
1. Data element S009/0057 is retained for upward compatibility. The use of
S016 and/or S017 is encouraged in preference.
2. The combination of the values carried in data elements 0062 and S009 shall
be used to identify uniquely the message within its group (if used) or if
not used, within its interchange, for the purpose of acknowledgement.
0020Beginning of messageMandatory->Max 1
To indicate the type and function of a message and to transmit the identifying number.
0030Date/time/periodMandatory->Max 5
To specify date, and/or time, or period.
0040Authentication resultConditional->Max 2
To specify results of the application of an authentication procedure.
0050Agreement identificationConditional->Max 2
To specify the agreement details.
0060Free textConditional->Max 10
To provide free form or coded text information.
Segment group 1
Repeat 5
1. 0080ReferenceMandatory->Max 1
  To specify a reference.
2. 0090Document/message detailsConditional->Max 1
  To identify documents and details directly related to it.
3. 0100Date/time/periodConditional->Max 1
  To specify date, and/or time, or period.
4. 0110Free textConditional->Max 5
  To provide free form or coded text information.
Segment group 2
Repeat 999
1. 0130Name and addressMandatory->Max 1
  To specify the name/address and their related function, either by C082 only and/or unstructured by C058 or structured by C080 thru 3207.
2. 0140Place/location identificationConditional->Max 99
  To identify a place or a location and/or related locations.
3. 0150Free textConditional->Max 10
  To provide free form or coded text information.
4. Segment group 3
  Repeat 10
  1. 0170ReferenceMandatory->Max 1
    To specify a reference.
  2. 0180Computer environment detailsConditional->Max 10
    To give a precise definition of all necessary elements belonging to the configuration of a computer system like hardware, firmware, operating system, communication (VANS, network type, protocol, format) and application software.
  3. 0190Date/time/periodConditional->Max 1
    To specify date, and/or time, or period.
5. Segment group 4
  Repeat 10
  1. 0210Contact informationMandatory->Max 1
    To identify a person or a department to whom communication should be directed.
  2. 0220Communication contactConditional->Max 5
    To identify a communication number of a department or a person to whom communication should be directed.
  3. 0230Place/location identificationConditional->Max 1
    To identify a place or a location and/or related locations.
Segment group 5
Repeat 999
1. 0250Document/message detailsMandatory->Max 1
  To identify documents and details directly related to it.
2. 0260Parties and instructionConditional->Max 99
  To specify parties to an instruction, the instruction, or both.
3. 0270ReferenceConditional->Max 1
  To specify a reference.
4. 0280MeasurementsConditional->Max 1
  To specify physical measurements, including dimension tolerances, weights and counts.
5. Segment group 6
  Repeat 99
  1. 0300External file link identificationMandatory->Max 1
    To specify the link of one non-EDIFACT external file to an EDIFACT message.
  2. 0310Computer environment detailsConditional->Max 10
    To give a precise definition of all necessary elements belonging to the configuration of a computer system like hardware, firmware, operating system, communication (VANS, network type, protocol, format) and application software.
  3. 0320Date/time/periodConditional->Max 5
    To specify date, and/or time, or period.
Segment group 7
Repeat 100000
1. 0340Structure identificationMandatory->Max 1
  A segment used to convey an indexing structure mechanism which identifies the positioning of a group or item.
2. 0350General indicatorConditional->Max 1
  To transmit a processing indicator.
  This segment will be removed effective with directory
  D.02B.
3. 0360Date/time/periodConditional->Max 1
  To specify date, and/or time, or period.
4. 0370Item descriptionConditional->Max 1
  To describe an item in either an industry or free format.
5. 0380ReferenceConditional->Max 5
  To specify a reference.
6. 0390QuantityConditional->Max 1
  To specify a pertinent quantity.
7. Segment group 8
  Repeat 1
  1. 0410Place/location identificationMandatory->Max 1
    To identify a place or a location and/or related locations.
  2. 0420DimensionsConditional->Max 5
    To specify dimensions.
  3. 0430QuantityConditional->Max 5
    To specify a pertinent quantity.
  4. 0440MeasurementsConditional->Max 1
    To specify physical measurements, including dimension tolerances, weights and counts.
0450Message trailerMandatory->Max 1
To end and check the completeness of a message.