CONDRA Drawing administration
Western European EDIFACT Board - MD5
The message will be used for the administration of each exchange of a set of engineering/CAD files. It will give additional information about the files; for example, their nature, a list of their contents and technical information necessary to interpret them.
The whole process of exchanging engineering or CAD (Computer Aided Design) files between different parties within one project will be supported by EDIFACT messages. The message CONDRA is one of these messages.
Header
- 0010Message headerMandatoryMax 1
To head, identify and specify a message.
- 0020Beginning of messageMandatoryMax 1
To indicate the type and function of a message and to transmit the identifying number.
- 0030Date/time/periodMandatoryMax 5
To specify date, and/or time, or period.
- 0040Authentication resultConditionalMax 2
To specify results of the application of an authentification procedure.
- 0050Agreement identificationConditionalMax 2
To specify the agreement details.
- 0060Free textConditionalMax 10
To provide free form or coded text information.
- 0070QuantityConditionalMax 5
To specify a pertinent quantity.
- Segment group 1Repeat 10
- 0090ReferenceMandatoryMax 1
To specify a reference.
- 0100Document/message detailsConditionalMax 1
To identify documents, either printed, electronically transferred, or referenced as specified in message description, including, where relevant, the identification of the type of transaction that will result from this message.
- 0110Date/time/periodConditionalMax 1
To specify date, and/or time, or period.
- 0120Free textConditionalMax 5
To provide free form or coded text information.
- 0090ReferenceMandatoryMax 1
- Segment group 2Repeat 999
- 0140Name and addressMandatoryMax 1
To specify the name/address and their related function, either by CO82 only and/or unstructured by CO58 or structured by CO80 thru 3207.
- 0150Place/location identificationConditionalMax 99
To identify a country/place/location/related location one/related location two.
- 0160Free textConditionalMax 10
To provide free form or coded text information.
- 0170Parties to instructionConditionalMax 10
To specify parties to an instruction and where relevant, the instruction.
- 0180Requirements and conditionsConditionalMax 10
To specify sector/subject requirements and conditions.
- Segment group 3Repeat 5
- 0200ReferenceMandatoryMax 1
To specify a reference.
- 0210Date/time/periodConditionalMax 1
To specify date, and/or time, or period.
- 0200ReferenceMandatoryMax 1
- Segment group 4Repeat 10
- 0230Contact informationMandatoryMax 1
To identify a person or a department to whom communication should be directed.
- 0240Communication contactConditionalMax 5
To identify a communication number of a department or a person to whom communication should be directed.
- 0250Place/location identificationConditionalMax 1
To identify a country/place/location/related location one/related location two.
- 0230Contact informationMandatoryMax 1
- 0140Name and addressMandatoryMax 1
- Segment group 5Repeat 99
- 0270External file link identificationMandatoryMax 1
To specify the link of one non-EDIFACT external file to an EDIFACT message.
- 0280Computer environment detailsMandatoryMax 10
To give a precise definition of all necessary elements belonging to the configuration of a computer system like hardware, firmware, operating system, communication (VANS, network type, protocol, format) and application software.
- 0290ReferenceConditionalMax 10
To specify a reference.
- 0300Date/time/periodConditionalMax 5
To specify date, and/or time, or period.
- 0310QuantityConditionalMax 5
To specify a pertinent quantity.
- Segment group 6Repeat 100000
- 0330Structure identificationMandatoryMax 1
A segment used to convey an indexing structure mechanism which identifies the positioning of a group or item.
- 0340General indicatorConditionalMax 5
To transmit a processing indicator.
- 0350Date/time/periodConditionalMax 10
To specify date, and/or time, or period.
- 0360Item descriptionConditionalMax 1
To describe an item in either an industry or free format.
- 0370QuantityConditionalMax 10
To specify a pertinent quantity.
- 0380Contact informationConditionalMax 1
To identify a person or a department to whom communication should be directed.
- 0390Authentication resultConditionalMax 2
To specify results of the application of an authentification procedure.
- 0400Agreement identificationConditionalMax 2
To specify the agreement details.
- 0410Parties to instructionConditionalMax 10
To specify parties to an instruction and where relevant, the instruction.
- 0420Requirements and conditionsConditionalMax 10
To specify sector/subject requirements and conditions.
- 0430Place/location identificationConditionalMax 5
To identify a country/place/location/related location one/related location two.
- 0440DimensionsConditionalMax 5
To specify dimensions.
- 0450MeasurementsConditionalMax 1
To specify physical measurements, including dimension tolerances, weights and counts.
- Segment group 7Repeat 99
- 0470ReferenceMandatoryMax 1
To specify a reference.
- Segment group 8Repeat 1
- 0490Document/message detailsMandatoryMax 1
To identify documents, either printed, electronically transferred, or referenced as specified in message description, including, where relevant, the identification of the type of transaction that will result from this message.
- 0500Date/time/periodConditionalMax 1
To specify date, and/or time, or period.
- 0490Document/message detailsMandatoryMax 1
- Segment group 9Repeat 999
- 0520Sequence detailsMandatoryMax 1
To provide specific details related to the delivery sequence.
- 0530Structure identificationMandatoryMax 1
A segment used to convey an indexing structure mechanism which identifies the positioning of a group or item.
- 0540ReferenceConditionalMax 1
To specify a reference.
- 0550General indicatorMandatoryMax 5
To transmit a processing indicator.
- 0560Date/time/periodConditionalMax 1
To specify date, and/or time, or period.
- 0570Item descriptionConditionalMax 1
To describe an item in either an industry or free format.
- 0520Sequence detailsMandatoryMax 1
- 0470ReferenceMandatoryMax 1
- 0330Structure identificationMandatoryMax 1
- 0270External file link identificationMandatoryMax 1
- 0580Message trailerMandatoryMax 1
To end and check the completeness of a message.