CONRPW Response of pending works

TBG6 Architecture, Engineering and Construction

This message is a reply to a CONAPW message and enables service providers to respond to a contractor giving details of any services and networks in the location where construction work is to be undertaken.

Header

Position
Segment
Name
Max use
  1. A service segment starting and uniquely identifying a message. The message type code for the Response of pending works message is CONRPW. Note: Response of pending works messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 CONRPW 0052 D 0054 13A 0051 UN

    1. Data element S009/0057 is retained for upward compatibility. The use of
    S016 and/or S017 is encouraged in preference.
    2. The combination of the values carried in data elements 0062 and S009 shall
    be used to identify uniquely the message within its group (if used) or if
    not used, within its interchange, for the purpose of acknowledgement.
  2. A segment for unique identification of the Response on pending works number and type of document.

  3. A segment to give prior references of the whole document, for example, project number or contract number, and authorization references if required, and the reference to the prior Advice on Pending Works.

  4. A segment specifying the dates that apply, e.g. forecasted date to start works, duration of the project and/or forecasted date of end of the works.

  5. Segment group 1
    Repeat 3
    1. A segment identifying names and addresses and their function relevant for the whole response on pending works. In the construction industry parties involved are e.g. the contractor, the designer, the client.

    2. Segment group 2
      Repeat 2
      1. A segment giving additional contact information relating to the party specified in the NAD segment, e.g. contact name, department or function.

      2. A segment to identify a communication number of the previous information given in CTA (phone, fax, telex, etc.).

  6. A segment which enables the sender to specify, in some occurrences, the location of the project and of existing networks.

  7. A segment to specify some special indications on the nature of the networks, in coded and/or clear form, that is not possible to indicate in the LOC segment.

  8. A segment to specify which other documents (drawing organization, circulation list, plans, etc.) are to be processed in conjunction with CONAPW, and what is the communication channel used to transfer them.

  9. A segment providing a control total, for example, the number of documents attached to CONAPW.

  10. A segment to provide an authentication of the message.

  11. A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message.

    1. 0062, the value shall be identical to the value in 0062 in the
    corresponding UNH segment.

Stedi is a registered trademark of Stedi, Inc. Stedi's EDI Reference is provided for marketing purposes and is free of charge. All names, logos, and brands of third parties listed on our site are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Our use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.