IFTCCA Forwarding and transport shipment charge calculation

TBG3 Transport

The function of this message is to request the calculation of the transport charges of a specific shipment and to answer to such a request.

Send feedback Share via email

Header

Position
Segment
Name
Max use

  1. A service segment starting and uniquely identifying a message. The message type code for the Forwarding and transport shipment charge calculation message is IFTCCA. Note: Forwarding and transport shipment charge calculation messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 IFTCCA 0052 D 0054 11B 0051 UN

  2. A segment to indicate the type and function of the message and to transmit the identifying number.

  3. A segment to identify a person or department to whom communication should be directed.

  4. A segment to identify a communication number of a person or department to whom communication should be directed.

  5. A segment to indicate date(s) and time(s) applying to the whole message.

  6. A segment to identify the contract, conditions of carriage, services and priority requirements for the transport.

  7. A segment to indicate the currency applicable to the whole message.

  8. A segment to indicate a monetary value applying to the whole message.

  9. A segment to specify free form or processable supplementary information. In computer-to-computer exchanges free form text will normally require the receiver to process this segment manually.

  10. Segment group 1
    Repeat 9

    1. A segment to identify a reference which applies to the entire message, e.g. reference to previous message.

    2. A segment to indicate date and time relating to the reference.

  11. A segment to specify control totals for the shipment.

  12. Segment group 2
    Repeat 99

    1. A segment to identify a location.

    2. A segment to indicate date(s) and time(s) related to the location.

  13. Segment group 3
    Repeat 9

    1. A segment to indicate the default charge methodology.

    2. A segment to indicate the charge calculation currency.

    3. A segment to indicate a place related to the charge methodology.

    4. A segment to identify the monetary amount associated with the charges, e.g. a maximum acceptable amount.

  14. Segment group 4
    Repeat 99

    1. A segment to indicate information related to the mode, means of transport and carrier.

      040 D5(040,030) If first, then all

    2. A segment to indicate date(s) and time(s) related to the details of transport.

    3. A segment to identify contract, conditions of carriage, services, priority requirements for this means of transport/carrier.

    4. A segment to indicate a location related to the details of transport.

    5. A segment to specify free form or processable supplementary information associated with the details of transport.

    6. Segment group 5
      Repeat 9

      1. A segment to identify a reference.

      2. A segment to indicate date(s) and time(s) related to the reference.

  15. Segment group 6
    Repeat 99

    1. A segment to identify the party's name, address and function.

    2. A segment to indicate a location where a specific function will be performed.

    3. Segment group 7
      Repeat 9

      1. A segment to identify a person or department within a party.

      2. A segment to identify the communication numbers of person or department to whom communication should be directed.

    4. Segment group 8
      Repeat 9

      1. A segment to identify a reference used by the party.

      2. A segment to indicate date(s) and time(s) related to the party.

  16. Segment group 9
    Repeat 999

    1. A segment to identify a goods item for which charges are calculated.

    2. A segment to specify handling instructions relating to the goods item.

    3. A segment to specify a temperature setting for the goods item.

    4. A segment to specify a temperature range setting for the goods item.

    5. A segment to identify a place/location relating to the goods item, e.g. the place where the goods item will be available for pick-up.

    6. A segment to specify free form or processable additional information relating to the goods item.

    7. Segment group 10
      Repeat 9

      1. A segment to describe the nature of cargo.

      2. A segment to describe the goods in free form.

    8. Segment group 11
      Repeat 99

      1. A segment to specify measurements (weight and/or volume), other than dimensions, applicable to the goods item.

      2. A segment to specify the number of units for which weights or volumes are expressed.

    9. Segment group 12
      Repeat 99

      1. A segment to specify dimensions applicable to the goods item.

      2. A segment to specify the number of units for which dimensions are expressed.

    10. Segment group 13
      Repeat 9

      1. A segment to specify a reference related to the goods item.

      2. A segment to indicate the number of units for which the given reference applies.

    11. Segment group 14
      Repeat 9

      1. A segment to identify transport details for a goods item.

      2. Segment group 15
        Repeat 9

        1. A segment to specify the distribution of a goods item among the transport details.

        2. A segment to indicate the number of units to which the given measurements apply.

    12. Segment group 16
      Repeat 999

      1. A segment to identify equipment in which goods will be transported.

      2. Segment group 17
        Repeat 9

        1. A segment to specify the distribution of a goods item among the equipment.

        2. A segment to indicate the number of equipment units to which the given measurements apply.

    13. Segment group 18
      Repeat 99

      1. A segment to specify charges associated with the goods item.

      2. A segment to specify price details (price and unit price basis).

      3. A segment to specify the number of units to which the unit price basis applies.

      4. A segment to indicate the applicable reduction or surcharge percentage details.

      5. A segment to specify a monetary amount (prepaid, discount, etc.).

      6. A segment to indicate a quantity, for example a chargeable weight.

      7. A segment to indicate a location where a specific function will be performed.

      8. A segment to specify a reference related to the calculated charge, e.g. reference to a specific contract.

      9. A segment to specify measurements, e.g. minimum limit of weight for which the charge and price are applicable.

      10. A segment to specify the currency in which the charge is expressed or must be expressed.

      11. A segment to specify a date/time related to the charge calculation, e.g. the expiry date of the calculation result.

      12. A segment to specify free form additional information related with the charge calculation.

    14. Segment group 19
      Repeat 9

      1. A segment to specify the class of dangerous goods, packing group, etc.

      2. A segment to specify the dangerous goods technical name and any other additional dangerous goods information.

      3. Segment group 20
        Repeat 9

        1. A segment to specify the measurements of the dangerous goods.

        2. A segment to specify the number of equipment units to which the measurements apply.

      4. Segment group 21
        Repeat 999

        1. A segment to identify the equipment in which the dangerous goods have to be transported.

        2. Segment group 22
          Repeat 9

          1. A segment to specify measurements of that portion of the dangerous goods in the equipment.

          2. A segment to specify the number of units to each of which the given measurement applies.

  17. Segment group 23
    Repeat 999

    1. A segment to specify equipment and/or equipment size and type.

    2. A segment to specify the number of pieces of equipment required.

    3. A segment to specify free form or processable supplementary information associated with the equipment.

    4. A segment to specify a reference number to equipment.

  18. A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message.

    1. 0062, the value shall be identical to the value in 0062 in the
    corresponding UNH segment.
Stedi.comDocumentationContact us

Stedi is a registered trademark of Stedi, Inc. Stedi's EDI Reference is provided for marketing purposes and is free of charge. All names, logos, and brands of third parties listed on our site are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Our use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.