X12 322 Terminal Operations and Intermodal Ramp Activity
This Draft Standard for Trial Use contains the format and establishes the data contents of the Terminal Operations and Intermodal Ramp Activity Transaction Set (322) for use within the context of an Electronic Data Interchange (EDI) environment. The transaction set can be used to provide all the information necessary for a terminal operation, port authority or intermodal ramp to communicate terminal and intermodal ramp activities (e.g., "ingates" and "outgates") to authorized parties to a shipment.
- ~ Segment
- * Element
- > Component
Interchange Control Header
To start and identify an interchange of zero or more functional groups and interchange-related control segments
Code to identify the type of information in the Authorization Information
- 00
- No Authorization Information Present (No Meaningful Information in I02)
Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
Code to identify the type of information in the Security Information
- 00
- No Security Information Present (No Meaningful Information in I04)
This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the receiver of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
Code to identify the agency responsible for the control standard used by the message that is enclosed by the interchange header and trailer
- U
- U.S. EDI Community of ASC X12, TDCC, and UCS
This version number covers the interchange control segments
- 00401
- Draft Standards for Trial Use Approved for Publication by ASC X12 Procedures Review Board through October 1997
A control number assigned by the interchange sender
Code sent by the sender to request an interchange acknowledgment (TA1)
- 0
- No Acknowledgment Requested
- 1
- Interchange Acknowledgment Requested
Code to indicate whether data enclosed by this interchange envelope is test, production or information
- I
- Information
- P
- Production Data
- T
- Test Data
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
- >
- Component Element Separator
Functional Group Header
To indicate the beginning of a functional group and to provide control information
Code identifying a group of application related transaction sets
- SO
- Ocean Shipment Information (304, 306, 309, 311, 317, 319, 321, 322, 323, 324, 325, 350, 352, 353, 354, 355, 356, 357, 358, 361)
Code identifying party sending transmission; codes agreed to by trading partners
Code identifying party receiving transmission. Codes agreed to by trading partners
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Assigned number originated and maintained by the sender
Code used in conjunction with Data Element 480 to identify the issuer of the standard
- T
- Transportation Data Coordinating Committee (TDCC)
- X
- Accredited Standards Committee X12
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
- 004010
- Draft Standards Approved for Publication by ASC X12 Procedures Review Board through October 1997
Heading
Transaction Set Header
To indicate the start of a transaction set and to assign a control number
Code uniquely identifying a Transaction Set
- The transaction set identifier (ST01) used by the translation routines of the interchange partners to select the appropriate transaction set definition (e.g., 810 selects the Invoice Transaction Set).
- 322
- Terminal Operations and Intermodal Ramp Activity
Status Details
To specify the status of the shipment in terms of dates, time, reference numbers, and location
Code indicating the status of a shipment
- A
- Arrived
- AL
- Loaded on Rail
- AR
- Rail Arrival at Destination Intermodal Ramp
- CB
- Chassis Tie
- CC
- Chassis Un-Tie
- I
- In-Gate
- J
- Delivered to Connecting Line
- OA
- Out-Gate
- P
- Departed Terminal Location
- R
- Received from Prior Carrier
- RL
- Rail Departure from Origin Intermodal Ramp
- UR
- Unloaded from a Rail Car
Date expressed as CCYYMMDD
- Q502 is the date of the status reported in Q501.
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
- Q503 is the time of the status reported in Q501.
Code identifying the time. In accordance with International Standards Organization standard 8601, time can be specified by a + or - and an indication in hours in relation to Universal Time Coordinate (UTC) time; since + is a restricted character, + and - are substituted by P and M in the codes that follow
Equipment Details
To identify the equipment
SCAC in the N712 or N723 segment must be the SCAC of the Shipping line that is using the Equipment
Prefix or alphabetic part of an equipment unit's identifying number
- N701 is mandatory for rail transactions.
Sequencing or serial part of an equipment unit's identifying number (pure numeric form for equipment number is preferred)
Code identifying type of equipment used for shipment
- CC
- Container resting on a Chassis
- CH
- Chassis
Standard Carrier Alpha Code
- N712 is the owner of the equipment.
Length (in feet and inches) of equipment ordered or used to transport shipment (The format is FFFII where FFF is feet and II is inches; the range for II is 00 through 11)
Date/Time Reference
To specify pertinent dates and times
Code specifying type of date or time, or both date and time
- 152
- Effective Date of Change
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Code identifying the time. In accordance with International Standards Organization standard 8601, time can be specified by a + or - and an indication in hours in relation to Universal Time Coordinate (UTC) time; since + is a restricted character, + and - are substituted by P and M in the codes that follow
- CS
- Central Standard Time
- CT
- Central Time
- ES
- Eastern Standard Time
- ET
- Eastern Time
- LT
- Local Time
Equipment Identification
To identify equipment and the commodity being carried
Prefix or alphabetic part of an equipment unit's identifying number
TSPU
TSPZ
Sequencing or serial part of an equipment unit's identifying number (pure numeric form for equipment number is preferred)
502103
125678
Code identifying type of equipment used for shipment
- CC
- Container resting on a Chassis
- CH
- Chassis
- CN
- Container
Code indicating status of equipment
- E
- Empty
- F
- L
- Load
Prefix or alphabetic part of an equipment unit's identifying number
- W211 (when available) is the chassis initial if W204 equals "CC". If unknown, use NONZ for chassis initial.
Port or Terminal
Contractual or operational port or point relevant to the movement of the cargo
Code defining function performed at the port or terminal with respect to a shipment
- 5
- Activity Location (Operational)
- 6
- Origin Rail Intermodal Terminal
- 7
- Destination Rail Intermodal Terminal
- D
- Port of Discharge (Operational)
- I
- Interim Point (Operational)
- L
- Port of Loading (Operational)
- R
- Place of Receipt (Contractual)
Code identifying type of location
D
SL
Code which identifies a specific location
3501
384020
Name
To identify a party by type of organization, name, and code
Shipper and Consignee identifier are not necessary if the SCAC of the shipper using the equipment is provided in the N712 or
N723 segments. Identifier MC is always necessary
Code identifying an organizational entity, a physical location, property or an individual
- CN
- Consignee
- MC
- Motor Carrier
- SH
- Shipper
MC
SH
Free-form name
MULTI-MODAL TRANSPORT, INC.
HAPAG-LLOYD [AMERICA] INC.
Code designating the system/method of code structure used for Identification Code (67)
Code identifying a party or other code
- This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.
MUM
HLCU
Reference Identification
To transmit identifying information as specified by the Reference Identification Qualifier
If Booking Number and/or Bill of
Lading are known, they must be provided
Code qualifying the Reference Identification
- BM
- Bill of Lading Number
- BN
- Booking Number
- TI
- TIR Number
Transaction Set Trailer
To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
Total number of segments included in a transaction set including ST and SE segments
Functional Group Trailer
To indicate the end of a functional group and to provide control information
Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element
Interchange Control Trailer
To define the end of an interchange of zero or more functional groups and interchange-related control segments
Sample1
Q5*OA*20091218*1603*CT
N7*TSPU*502103*********CC*TRAC***4120*******9200*TRAC
DTM*152*20091218*1603*CT
W2*TSPU*502103**CC*E******TSPZ*125678
R4*I*D*3501*MINNEAPOLIS**
N1*MC*MULTI-MODAL TRANSPORT, INC.*2*MUMT
N1*SH*TRAC LEASE
N1*CN* TRAC LEASE
N9*TI*246445
N9*BN*RNYK2161
SE*12*00001
Stedi is a registered trademark of Stedi, Inc. All names, logos, and brands of third parties listed on this page are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.