X12 810 Invoice
This Draft Standard for Trial Use contains the format and establishes the data contents of the Invoice Transaction Set (810) for use within the context of an Electronic Data Interchange (EDI) environment. The transaction set can be used to provide for customary and established business and industry practice relative to the billing for goods and services provided.
- ~ Segment
- * Element
- > Component
- None included
Interchange Control Header
To start and identify an interchange of zero or more functional groups and interchange-related control segments
Code to identify the type of information in the Authorization Information
- 00
- No Authorization Information Present (No Meaningful Information in I02)
Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
Code to identify the type of information in the Security Information
- 00
- No Security Information Present (No Meaningful Information in I04)
This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the receiver of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
Code to identify the agency responsible for the control standard used by the message that is enclosed by the interchange header and trailer
- U
- U.S. EDI Community of ASC X12, TDCC, and UCS
This version number covers the interchange control segments
- 00401
- Draft Standards for Trial Use Approved for Publication by ASC X12 Procedures Review Board through October 1997
A control number assigned by the interchange sender
Code sent by the sender to request an interchange acknowledgment (TA1)
- 0
- No Acknowledgment Requested
- 1
- Interchange Acknowledgment Requested
Code to indicate whether data enclosed by this interchange envelope is test, production or information
- I
- Information
- P
- Production Data
- T
- Test Data
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
- >
- Component Element Separator
Functional Group Header
To indicate the beginning of a functional group and to provide control information
Code identifying a group of application related transaction sets
- IN
- Invoice Information (810,819)
Code identifying party sending transmission; codes agreed to by trading partners
Code identifying party receiving transmission. Codes agreed to by trading partners
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Assigned number originated and maintained by the sender
Code used in conjunction with Data Element 480 to identify the issuer of the standard
- T
- Transportation Data Coordinating Committee (TDCC)
- X
- Accredited Standards Committee X12
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
- 004010
- Draft Standards Approved for Publication by ASC X12 Procedures Review Board through October 1997
Heading
Transaction Set Header
To indicate the start of a transaction set and to assign a control number
Code uniquely identifying a Transaction Set
- The transaction set identifier (ST01) used by the translation routines of the interchange partners to select the appropriate transaction set definition (e.g., 810 selects the Invoice Transaction Set).
- 810
- Invoice
Beginning Segment for Invoice
To indicate the beginning of an invoice transaction set and transmit identifying numbers and dates
Date expressed as CCYYMMDD
- BIG01 is the invoice issue date.
Date expressed as CCYYMMDD
- BIG03 is the date assigned by the purchaser to purchase order.
Identifying number for Purchase Order assigned by the orderer/purchaser
Reference Identification
To specify identifying information
Code qualifying the Reference Identification
- 3L
- Branch Identifier
Required
Northern Tool Company Number
- 19
- Division Identifier
- AN
- Associated Purchase Orders
- BM
- Bill of Lading Number
Either BM or CN are required.
- CN
- Carrier's Reference Number (PRO/Invoice)
Either BM or CN are required.
- IA
- Internal Vendor Number
Required
Name
To identify a party by type of organization, name, and code
Code identifying an organizational entity, a physical location, property or an individual
- RI
- Remit To
Code designating the system/method of code structure used for Identification Code (67)
N103 and N104 are required for Manufacturing, DC and Direct to Store Orders.
- 92
- Assigned by Buyer or Buyer's Agent
Code identifying a party or other code
- This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.
N103 and N104 are required for Manufacturing, DC and Direct to Store Orders.
Address Information
To specify the location of the named party
Required for Ship To when order is Ship to Consumer (DS) and Remit To.
Geographic Location
To specify the geographic place of the named party
Required for Ship To when order is Ship to Consumer (DS) and Remit To.
Free-form text for city name
- A combination of either N401 through N404, or N405 and N406 may be adequate to specify a location.
Code (Standard State/Province) as defined by appropriate government agency
- N402 is required only if city name (N401) is in the U.S. or Canada.
Code defining international postal zone code excluding punctuation and blanks (zip code for United States)
Name
To identify a party by type of organization, name, and code
Code identifying an organizational entity, a physical location, property or an individual
- ST
- Ship To
Code designating the system/method of code structure used for Identification Code (67)
N103 and N104 are required for Manufacturing, DC and Direct to Store Orders.
- 92
- Assigned by Buyer or Buyer's Agent
Code identifying a party or other code
- This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.
N103 and N104 are required for Manufacturing, DC and Direct to Store Orders.
Address Information
To specify the location of the named party
Required for Ship To when order is Ship to Consumer (DS) and Remit To.
Geographic Location
To specify the geographic place of the named party
Required for Ship To when order is Ship to Consumer (DS) and Remit To.
Free-form text for city name
- A combination of either N401 through N404, or N405 and N406 may be adequate to specify a location.
Code (Standard State/Province) as defined by appropriate government agency
- N402 is required only if city name (N401) is in the U.S. or Canada.
Code defining international postal zone code excluding punctuation and blanks (zip code for United States)
Terms of Sale/Deferred Terms of Sale
To specify terms of sale
Date/Time Reference
To specify pertinent dates and times
F.O.B. Related Instructions
To specify transportation instructions relating to shipment
Code identifying payment terms for transportation charges
- FOB01 indicates which party will pay the carrier.
- CC
- Collect
- DF
- Defined by Buyer and Seller
- PP
- Prepaid (by Seller)
- TP
- Third Party Pay
Code identifying type of location
- FOB02 is the code specifying transportation responsibility location.
- DE
- Destination (Shipping)
- OR
- Origin (Shipping Point)
Detail
Baseline Item Data (Invoice)
To specify the basic and most frequently used line item data for the invoice and related transactions
Alphanumeric characters assigned for differentiation within a transaction set
- IT101 is the purchase order line item identification.
IT101 must be the same as PO101 on the 850.
Number of units invoiced (supplier units)
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
- BO
- Bottle
- BR
- Barrel
- BX
- Box
- CA
- Case
- CN
- Can
- CT
- Carton
- DR
- Drum
- EA
- Each
Warehouse and Retail Store orders will only use this UOM.
- FT
- Foot
- GA
- Gallon
- HR
- Hours
- IN
- Inch
- LB
- Pound
- OZ
- Ounce - Av
- PR
- Pair
- PT
- Pint
- QT
- Quart
- RL
- Roll
- RM
- Ream
- SF
- Square Foot
- SL
- Sleeve
Price per unit of product, service, commodity, etc.
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- IT106 through IT125 provide for ten different product/service IDs for each item. For example: Case, Color, Drawing No., U.P.C. No., ISBN No., Model No., or SKU.
- BP
- Buyer's Part Number
Identifying number for a product or service
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- VP
- Vendor's (Seller's) Part Number
Identifying number for a product or service
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- UK
- U.P.C./EAN Shipping Container Code (1-2-5-5-1)
- UP
- U.P.C. Consumer Package Code (1-5-5-1)
Identifying number for a product or service
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- EC
- Engineering Change Level
Product/Item Description
To describe a product or process in coded or free-form format
Code indicating the format of a description
- If PID01 equals "F", then PID05 is used. If PID01 equals "S", then PID04 is used. If PID01 equals "X", then both PID04 and PID05 are used.
- F
- Free-form
Code identifying the general class of a product or process characteristic
- 08
- Product
Summary
Total Monetary Value Summary
To specify the total invoice discounts and amounts
Monetary amount
- TDS01 is the total amount of invoice (including charges, less allowances) before terms discount (if discount is applicable).
Total Invoice Amount
Monetary amount
- TDS02 indicates the amount upon which the terms discount amount is calculated.
- TDS02 is required if the dollar value subject to discount is not equal to the dollar value of TDS01.
Total Merchandise Amount
Monetary amount
- TDS03 is the amount of invoice due if paid by terms discount due date (total invoice or installment amount less cash discount).
Carrier Detail
To specify transportation details for the transaction
Service, Promotion, Allowance, or Charge Information
To request or identify a service, promotion, allowance, or charge; to specify the amount or percentage for the service, promotion, allowance, or charge
Zappos does not accept freight charges at this time.
Code which indicates an allowance or charge for the service specified
- If SAC01 is "A" or "C", then at least one of SAC05, SAC07, or SAC08 is required.
- A
- Allowance
- C
- Charge
Code identifying the service, promotion, allowance, or charge
- A260
- Advertising Allowance
- B210
- Co-op Credit
- C000
- Defective Allowance
- C310
- Discount
- C460
- Drop Dock
- C680
- Environmental Protection Service
Used for Tire Disposal
- D240
- Freight
- D500
- Handling
- E380
- Lift Gate (Truck) or Forklift Service at Pick-up/Delivery
- E620
- Metals Surcharge
- E750
- New Store Discount
- F970
- Rebate
- G090
- Recovery Feed
Used for Warranty Recovery
- G830
- Shipping and Handling
Direct Ship Fee
- H000
- Special Allowance
- I530
- Volume Discount
- I590
- Warranties
Used for Warranty Expense
Monetary amount
- SAC05 is the total amount for the service, promotion, allowance, or charge.
- If SAC05 is present with SAC07 or SAC08, then SAC05 takes precedence.
Code indicating method of handling for an allowance or charge
- 02
- Off Invoice
Invoice Shipment Summary
To specify summary details of total items shipped in terms of quantity, weight, and volume
Numeric value of units shipped in manufacturer's shipping units for a line item or transaction set
Transaction Totals
To transmit a hash total for a specific element in the transaction set
- Number of line items (CTT01) is the accumulation of the number of IT1 segments.
If used, hash total (CTT02) is the sum of the value of quantities invoiced (IT102) for each IT1 segment.
Total number of line items in the transaction set
Sum of values of the specified data element. All values in the data element will be summed without regard to decimal points (explicit or implicit) or signs. Truncation will occur on the left most digits if the sum is greater than the maximum size of the hash total of the data element.
-.0018 First occurrence of value being hashed.
.18 Second occurrence of value being hashed.
1.8 Third occurrence of value being hashed.
18.01 Fourth occurrence of value being hashed.
1855 Hash total prior to truncation.
855 Hash total after truncation to three-digit field.
Transaction Set Trailer
To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
Total number of segments included in a transaction set including ST and SE segments
Functional Group Trailer
To indicate the end of a functional group and to provide control information
Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element
Interchange Control Trailer
To define the end of an interchange of zero or more functional groups and interchange-related control segments
Stedi is a registered trademark of Stedi, Inc. All names, logos, and brands of third parties listed on this page are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.