X12 810 Invoice (4050VICS)
This X12 Transaction Set contains the format and establishes the data contents of the Invoice Transaction Set (810) for use within the context of an Electronic Data Interchange (EDI) environment. The transaction set can be used to provide for customary and established business and industry practice relative to the billing for goods and services provided.
- ~ Segment
- * Element
- > Component
- ^ Repetition
- None included
Interchange Control Header
To start and identify an interchange of zero or more functional groups and interchange-related control segments
Code identifying the type of information in the Authorization Information
- 00
- No Authorization Information Present (No Meaningful Information in I02)
Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
Code identifying the type of information in the Security Information
- 00
- No Security Information Present (No Meaningful Information in I04)
This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
Code indicating the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
Code indicating the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the receiver of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
Type is not applicable; the repetition separator is a delimiter and not a data element; this field provides the delimiter used to separate repeated occurrences of a simple data element or a composite data structure; this value must be different than the data element separator, component element separator, and the segment terminator
- ^
- Repetition Separator
Code specifying the version number of the interchange control segments
- 00405
- Standards Approved for Publication by ASC X12 Procedures Review Board through October 2001
A control number assigned by the interchange sender
Code indicating sender's request for an interchange acknowledgment
- 0
- No Interchange Acknowledgment Requested
- 1
- Interchange Acknowledgment Requested (TA1)
Code indicating whether data enclosed by this interchange envelope is test, production or information
- I
- Information
- P
- Production Data
- T
- Test Data
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
- >
- Component Element Separator
Functional Group Header
To indicate the beginning of a functional group and to provide control information
Code identifying a group of application related transaction sets
- IN
- Invoice Information (810)
Code identifying party sending transmission; codes agreed to by trading partners
Code identifying party receiving transmission; codes agreed to by trading partners
Date expressed as CCYYMMDD where CC represents the first two digits of the calendar year
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Assigned number originated and maintained by the sender
Code identifying the issuer of the standard; this code is used in conjunction with Data Element 480
- T
- Transportation Data Coordinating Committee (TDCC)
- X
- Accredited Standards Committee X12
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
- 004050
- Standards Approved for Publication by ASC X12 Procedures Review Board through October 2001
Heading
Transaction Set Header
To indicate the start of a transaction set and to assign a control number
Code uniquely identifying a Transaction Set
- The transaction set identifier (ST01) is used by the translation routines of the interchange partners to select the appropriate transaction set definition (e.g., 810 selects the Invoice Transaction Set).
- 810
- Invoice
Beginning Segment for Invoice
To indicate the beginning of an invoice transaction set and transmit identifying numbers and dates
Date expressed as CCYYMMDD where CC represents the first two digits of the calendar year
- BIG01 is the invoice issue date.
Identifying number assigned by issuer
Supplied by Partner
Party Identification
To identify a party by type of organization, name, and code
Code identifying an organizational entity, a physical location, property or an individual
- RI
- Remit To
Code designating the system/method of code structure used for Identification Code (67)
- 1
- D-U-N-S Number, Dun & Bradstreet
- 9
- D-U-N-S+4, D-U-N-S Number with Four Character Suffix
Code identifying a party or other code
- This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.
Additional Name Information
To specify additional names
Party Location
To specify the location of the named party
Geographic Location
To specify the geographic place of the named party
Free-form text for city name
- A combination of either N401 through N404, or N405 and N406 may be adequate to specify a location.
Code (Standard State/Province) as defined by appropriate government agency
- N402 is required only if city name (N401) is in the U.S. or Canada.
Party Identification
To identify a party by type of organization, name, and code
Code identifying an organizational entity, a physical location, property or an individual
- ST
- Ship To
Code designating the system/method of code structure used for Identification Code (67)
- 9
- D-U-N-S+4, D-U-N-S Number with Four Character Suffix
- 92
- Assigned by Buyer or Buyer's Agent
Code identifying a party or other code
- This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.
3-4 Digit Store / DC # or "006959555XXXX" where XXXX equals the Meijer location
Terms of Sale/Deferred Terms of Sale
To specify terms of sale
Code identifying type of payment terms
- If the code in ITD01 is "04", then ITD07 or ITD09 is required and either ITD10 or ITD11 is required; if the code in ITD01 is "05", then ITD06 or ITD07 is required.
Do not use codes “01”,”03”,”06” “11”, “14”
Code identifying the beginning of the terms period
Terms discount percentage, expressed as a percent, available to the purchaser if an invoice is paid on or before the Terms Discount Due Date
If cash discounts are applicable, these elements must also be sent.
Number of days in the terms discount period by which payment is due if terms discount is earned
If cash discounts are applicable, these elements must also be sent.
Date/Time Reference
To specify pertinent dates and times
F.O.B. Related Instructions
To specify transportation instructions relating to shipment
Code identifying payment terms for transportation charges
- FOB01 indicates which party will pay the carrier.
Detail
Baseline Item Data (Invoice)
To specify the basic and most frequently used line item data for the invoice and related transactions
Number of units invoiced (supplier units)
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
See Data Dictionary
Price per unit of product, service, commodity, etc.
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- IT106 through IT125 provide for ten different product/service IDs for each item. For example: Case, Color, Drawing No., U.P.C. No., ISBN No., Model No., or SKU.
- EN
- EAN/UCC - 13
- EO
- EAN/UCC - 8
- UP
- UCC - 12
Identifying number for a product or service
EAN8, EAN13, UCC12
8 – 13 digits
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- UA
- U.P.C./EAN Case Code (2-5-5)
- UK
- EAN/UCC - 14
Identifying number for a product or service
UPC Case Code 12-14 digit
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- IN
- Buyer's Item Number
Identifying number for a product or service
Meijer Case Pack ID 6-25 digits
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- N4
- National Drug Code in 5-4-2 Format
- VN
- Vendor's (Seller's) Item Number
Product/Item Description
To describe a product or process in coded or free-form format
Code indicating the format of a description
- If PID01 equals "F", then PID05 is used. If PID01 equals "S", then PID04 is used. If PID01 equals "X", then both PID04 and PID05 are used.
- F
- Free-form
Item Physical Details
To specify the physical qualities, packaging, weights, and dimensions relating to the item
The number of inner containers, or number of eaches if there are no inner containers, per outer container
No. of inner packs, or No. of EA.,if there are no inner packs
Service, Promotion, Allowance, or Charge Information
To request or identify a service, promotion, allowance, or charge; to specify the amount or percentage for the service, promotion, allowance, or charge
Code which indicates an allowance or charge for the service specified
- If SAC01 is "A" or "C", then at least one of SAC05, SAC07, or SAC08 is required.
- A
- Allowance
- C
- Charge
Code identifying the service, promotion, allowance, or charge
See Data Dictionary, for Free Goods: Code “D170”
Monetary amount
- SAC05 is the total amount for the service, promotion, allowance, or charge.
- If SAC05 is present with SAC07 or SAC08, then SAC05 takes precedence.
Summary
Total Monetary Value Summary
To specify the total invoice discounts and amounts
Monetary amount
- TDS01 is the total amount of invoice (including charges, less allowances) before terms discount (if discount is applicable).
Monetary amount
- TDS02 indicates the amount upon which the terms discount amount is calculated.
- TDS02 is required if the dollar value subject to discount is not equal to the dollar value of TDS01.
If cash discounts are given, these elements must be sent.
Monetary amount
- TDS03 is the amount of invoice due if paid by terms discount due date (total invoice or installment amount less cash discount).
If cash discounts are given, these elements must be sent.
Service, Promotion, Allowance, or Charge Information
To request or identify a service, promotion, allowance, or charge; to specify the amount or percentage for the service, promotion, allowance, or charge
The allowance/charge must be in the exact position as on the original purchase order.
Code which indicates an allowance or charge for the service specified
- If SAC01 is "A" or "C", then at least one of SAC05, SAC07, or SAC08 is required.
- A
- Allowance
- C
- Charge
Code identifying the service, promotion, allowance, or charge
See Data Dictionary, for Free Goods: Code “D170”
Monetary amount
- SAC05 is the total amount for the service, promotion, allowance, or charge.
- If SAC05 is present with SAC07 or SAC08, then SAC05 takes precedence.
Invoice Shipment Summary
To specify summary details of total items shipped in terms of quantity, weight, and volume
Numeric value of units shipped in manufacturer's shipping units for a line item or transaction set
Transaction Totals
To transmit a hash total for a specific element in the transaction set
- Number of line items (CTT01) is the accumulation of the number of IT1 segments.
If used CTT02 is the hash total of the quantities invoiced (IT102) for each IT1 segment.
Transaction Set Trailer
To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
Total number of segments included in a transaction set including ST and SE segments
Functional Group Trailer
To indicate the end of a functional group and to provide control information
Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element
Interchange Control Trailer
To define the end of an interchange of zero or more functional groups and interchange-related control segments
Stedi is a registered trademark of Stedi, Inc. All names, logos, and brands of third parties listed on this page are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.