X12 204 Motor Carrier Load Tender
This Draft Standard for Trial Use contains the format and establishes the data contents of the Motor Carrier Load Tender Transaction Set (204) for use within the context of an Electronic Data Interchange (EDI) environment. This transaction set can be used to allow shippers or other interested parties to offer (tender) a shipment to a full load (truckload) motor carrier including detailed scheduling, equipment requirements, commodities, and shipping instructions pertinent to a load tender. It is not to be used to provide a motor carrier with data relative to a Less-than-Truckload bill of lading, pick-up notification, or manifest.
- ~ Segment
- * Element
- > Component
- ^ Repetition
Interchange Control Header
To start and identify an interchange of zero or more functional groups and interchange-related control segments
Code identifying the type of information in the Authorization Information
- 00
- No Authorization Information Present (No Meaningful Information in I02)
Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
Code identifying the type of information in the Security Information
- 00
- No Security Information Present (No Meaningful Information in I04)
This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
Code indicating the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
Code indicating the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the receiver of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
Type is not applicable; the repetition separator is a delimiter and not a data element; this field provides the delimiter used to separate repeated occurrences of a simple data element or a composite data structure; this value must be different than the data element separator, component element separator, and the segment terminator
- ^
- Repetition Separator
Code specifying the version number of the interchange control segments
- 00403
- Draft Standards for Trial Use Approved for Publication by ASC X12 Procedures Review Board through October 1999
A control number assigned by the interchange sender
Code indicating sender's request for an interchange acknowledgment
- 0
- No Acknowledgment Requested
- 1
- Interchange Acknowledgment Requested
Code indicating whether data enclosed by this interchange envelope is test, production or information
- I
- Information
- P
- Production Data
- T
- Test Data
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
- >
- Component Element Separator
Functional Group Header
To indicate the beginning of a functional group and to provide control information
Code identifying a group of application related transaction sets
- SM
- Motor Carrier Load Tender (204)
Code identifying party sending transmission; codes agreed to by trading partners
Code identifying party receiving transmission; codes agreed to by trading partners
Date expressed as CCYYMMDD where CC represents the first two digits of the calendar year
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Assigned number originated and maintained by the sender
Code identifying the issuer of the standard; this code is used in conjunction with Data Element 480
- T
- Transportation Data Coordinating Committee (TDCC)
- X
- Accredited Standards Committee X12
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
- 004030
- Draft Standards Approved for Publication by ASC X12 Procedures Review Board through October 1999
Heading
Transaction Set Header
To indicate the start of a transaction set and to assign a control number
Code uniquely identifying a Transaction Set
- The transaction set identifier (ST01) is used by the translation routines of the interchange partners to select the appropriate transaction set definition (e.g., 810 selects the Invoice Transaction Set).
- 204
- Motor Carrier Load Tender
Beginning Segment for Shipment Information Transaction
To transmit basic data relating to shipment information
Standard Carrier Alpha Code
- B202 contains the Standard Carrier Alpha Code (SCAC) of the carrier that will receive the bill of lading.
- B202 is mandatory for transaction set 204.
Identification number assigned to the shipment by the shipper that uniquely identifies the shipment from origin to ultimate destination and is not subject to modification; (Does not contain blanks or special characters)
Set Purpose
To allow for positive identification of transaction set purpose
Business Instructions and Reference Number
To specify instructions in this business relationship or a reference number
Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier
Bill of Lading Handling Requirements
To identify Bill of Lading handling and service requirements
Note/Special Instruction
To transmit information in a free-form format, if necessary, for comment or special instruction
Name
To identify a party by type of organization, name, and code
- Loop 0100 is used to convey name and address detail relative to bill-to, party controlling freight, or other shipment level name and address information. It is not used to convey ship from or ship to detail which should be handled within loop 0300 in table 2.
Contact
To identify a person or office to whom communications should be directed
Code identifying the major duty or responsibility of the person or group named
- AJ
- Primary Contact
Code identifying the type of communication number
- G6103 qualifies G6104.
- EM
- Electronic Mail
Sequencing or serial part of an equipment unit's identifying number (pure numeric form for equipment number is preferred)
Detail
Stop-off Details
To specify stop-off detail reference numbers and stop reason
Date/Time
To specify pertinent dates and times
- Use G62 segment either in loop 0300 or loop 0350, but not both.
Code specifying type of date
- 10
- Requested Ship Date/Pick-up Date
- 68
- Requested Delivery Date
- 77
- Pickup Appointment Scheduled Date
- 78
- Delivery Appointment Scheduled Date
Date expressed as CCYYMMDD where CC represents the first two digits of the calendar year
Code specifying the reported time
- 2
- Pickup Appointment Scheduled Time
- 3
- Delivery Appointment Scheduled Time
- 4
- Pickup Requested Scheduled Time
- 5
- Delivery Requested Scheduled Time
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Shipment Weight, Packaging and Quantity Data
To specify shipment details in terms of weight, and quantity of handling units
- Segment AT8 in loop 0300 is intended for the transmitting of total weight, quantity, and volume relative to the specific stop-off. Should weight, quantity, and volume also be sent in segment AT8 in loop 0320 and tied to commodity detail, then the accumulated amounts of weight, quantity, and volume in the AT8 segment in loop 0320 should equal the amounts in the single AT8 occurrence in loop 0300.
Number of units (pieces) of the lading commodity
- AT804 is the quantity of handling units that are not unitized (for example a carton). When added to the quantity in AT805, it is the total quantity of handling units in the shipment.
Number of units (pieces) of the lading commodity
- AT804 is the quantity of handling units that are not unitized (for example a carton). When added to the quantity in AT805, it is the total quantity of handling units in the shipment.
Code identifying the volume unit
- E
- Cubic Feet
- G
- Gallons
Name
To identify a party by type of organization, name, and code
Code identifying an organizational entity, a physical location, property or an individual
- SF
- Ship From
- ST
- Ship To
Code designating the system/method of code structure used for Identification Code (67)
- ZZ
- Mutually Defined
Code identifying a party or other code
- This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.
Address Information
To specify the location of the named party
Geographic Location
To specify the geographic place of the named party
Free-form text for city name
- A combination of either N401 through N404, or N405 and N406 may be adequate to specify a location.
Code (Standard State/Province) as defined by appropriate government agency
- N402 is required only if city name (N401) is in the U.S. or Canada.
Code defining international postal zone code excluding punctuation and blanks (zip code for United States)
Order Identification Detail
To specify order identification detail
- Use loop 0350 for conveying seller's order/invoice level detail or buyer's purchase order level detail. If not using order level detail, this loop should not be used.
Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier
OID_01 Will contain Order Number.
When OID_01 begins with "I" the OID_01 = Pickup number
I ==> STO or IBT (Stock Transfer Order or Inter-Branch Transfer)
P ==> Purchase Order
If no I or P ==> Agency Sales/ ODwalla or any other order types
Summary
Total Weight and Charges
To specify the total shipment in terms of weight, volume, rates, charges, advances, and prepaid amounts applicable to one or more line items
Transaction Set Trailer
To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
Total number of segments included in a transaction set including ST and SE segments
Functional Group Trailer
To indicate the end of a functional group and to provide control information
Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element
Interchange Control Trailer
To define the end of an interchange of zero or more functional groups and interchange-related control segments
Sample 1
GS*SM*003296175*SCAC*20210113*1203*000013523*X*004030~
ST*204*0001~
B2**SCAC**306942753**DF~
B2A*00~
L11*385491188*TN~
L11*SAP*AGL~
AT5*OHC~
NTE*ZZZ*219.759 MI~
NTE**B 191.23 USD~
NTE**A 54.95 USD 405~
NTE*EED*DRY VAN~
NTE**From HOWARD,PA To AKRON,OH Pickup JAN-26-21 Drop JAN-26-21~
NTE**PROTECT FROM FREEZING~
N1*98*COCA-COLA LOGISTICS~
G61*AJ*JOHN DOE*EM*JOHNDOE@COCA-COLA.COM~
N7**UNASSIGNED*********TV~
S5*1*LD~
G62*10*20210126*4*0000~
AT8*G*L*44497.04*1596*28*G*0~
N1*SF*NIAGARA MILESBURG*ZZ*51970010~
N3*217 AQUA PENN DRIVE~
N4*HOWARD*PA*16841*USA~
OID*402944510*4503048644~
S5*2*UL~
G62*68*20210126*5*0359~
AT8*G*L*44497.04*1596*28*G*0~
N1*ST*CONSOLIDATED CCBC AKRON*ZZ*10505382_C~
N3*1560 TRIPLETT BLVD~
N4*AKRON*OH*44306*USA~
OID*402944510*4503048644~
L3*****24617~
SE*31*0001~
GE*1*000013523~
IEA*1*000013523~
Stedi is a registered trademark of Stedi, Inc. All names, logos, and brands of third parties listed on this page are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.