X12 856 B2B Ship Notice/Manifest
This Draft Standard for Trial Use contains the format and establishes the data contents of the Ship Notice/Manifest Transaction Set (856) for use within the context of an Electronic Data Interchange (EDI) environment. The transaction set can be used to list the contents of a shipment of goods as well as additional information relating to the shipment, such as order information, product description, physical characteristics, type of packaging, marking, carrier information, and configuration of goods within the transportation equipment. The transaction set enables the sender to describe the contents and configuration of a shipment in various levels of detail and provides an ordered flexibility to convey information.
The sender of this transaction is the organization responsible for detailing and communicating the contents of a shipment, or shipments, to one or more receivers of the transaction set. The receiver of this transaction set can be any organization having an interest in the contents of a shipment or information about the contents of a shipment.
- ~ Segment
- * Element
- > Component
Interchange Control Header
To start and identify an interchange of zero or more functional groups and interchange-related control segments
Code to identify the type of information in the Authorization Information
- 00
- No Authorization Information Present (No Meaningful Information in I02)
Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
Code to identify the type of information in the Security Information
- 00
- No Security Information Present (No Meaningful Information in I04)
This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the receiver of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
Code to identify the agency responsible for the control standard used by the message that is enclosed by the interchange header and trailer
- U
- U.S. EDI Community of ASC X12, TDCC, and UCS
This version number covers the interchange control segments
- 00401
- Draft Standards for Trial Use Approved for Publication by ASC X12 Procedures Review Board through October 1997
A control number assigned by the interchange sender
Code sent by the sender to request an interchange acknowledgment (TA1)
- 0
- No Acknowledgment Requested
- 1
- Interchange Acknowledgment Requested
Code to indicate whether data enclosed by this interchange envelope is test, production or information
- I
- Information
- P
- Production Data
- T
- Test Data
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
- >
- Component Element Separator
Functional Group Header
To indicate the beginning of a functional group and to provide control information
Code identifying a group of application related transaction sets
- SH
- Ship Notice/Manifest (856)
Code identifying party sending transmission; codes agreed to by trading partners
Code identifying party receiving transmission. Codes agreed to by trading partners
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Assigned number originated and maintained by the sender
Code used in conjunction with Data Element 480 to identify the issuer of the standard
- T
- Transportation Data Coordinating Committee (TDCC)
- X
- Accredited Standards Committee X12
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
- 004010
- Draft Standards Approved for Publication by ASC X12 Procedures Review Board through October 1997
Heading
Transaction Set Header
To indicate the start of a transaction set and to assign a control number
Code uniquely identifying a Transaction Set
- The transaction set identifier (ST01) used by the translation routines of the interchange partners to select the appropriate transaction set definition (e.g., 810 selects the Invoice Transaction Set).
- 856
- Ship Notice/Manifest
Beginning Segment for Ship Notice
To transmit identifying numbers, dates, and other basic data relating to the transaction set
BSN02 must follow this format: the PO number (Babylist assigned) AND your internal order reference number connected by an underscore character.
Example: PO200500_REF0001
Code identifying purpose of transaction set
A unique control number assigned by the original shipper to identify a specific shipment
Date expressed as CCYYMMDD
- BSN03 is the date the shipment transaction set is created.
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
- BSN04 is the time the shipment transaction set is created.
Detail
Hierarchical Level
To identify dependencies among and the content of hierarchically related groups of data segments
- The HL segment is the only mandatory segment within the HL loop, and by itself, the HL segment has no meaning.
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
- HL01 shall contain a unique alphanumeric number for each occurrence of the HL segment in the transaction set. For example, HL01 could be used to indicate the number of occurrences of the HL segment, in which case the value of HL01 would be "1" for the initial HL segment and would be incremented by one in each subsequent HL segment within the transaction.
Code defining the characteristic of a level in a hierarchical structure
- HL03 indicates the context of the series of segments following the current HL segment up to the next occurrence of an HL segment in the transaction. For example, HL03 is used to indicate that subsequent segments in the HL loop form a logical grouping of data referring to shipment, order, or item-level information.
- S
- Shipment
Code indicating if there are hierarchical child data segments subordinate to the level being described
- HL04 indicates whether or not there are subordinate (or child) HL segments related to the current HL segment.
- 1
- Additional Subordinate HL Data Segment in This Hierarchical Structure.
Carrier Details (Routing Sequence/Transit Time)
To specify the carrier and sequence of routing and provide transit time information
TD503 Identification (Carrier Code) - this is the Standard Carrier Alpha Code (SCAC). If you are using your own custom shipping methods, these are set-up on the "Shipment Settings" page in the portal, the Carrier Code will automatically populate based on the Class Code (TD505) submitted.
TD505 Routing (Class code) - This is the field that will be a combination of both SCAC and Service Level. If you map this to your partner's, the Carrier Code (TD503) and the Service Level Code (TD512) will automatically populate accordingly. This will allow you to only keep track of one code (Class Code) rather then 3.
TD512 Service Level Code (Service Level Code) - If you are using your own custom shipping methods, these are set-up on the "Shipment Settings" page in the portal, the Service Level Code (TD512) will automatically populate based on the Class Code (TD505) submitted.
Code describing the relationship of a carrier to a specific shipment movement
- B
- Origin/Delivery Carrier (Any Mode)
Code designating the system/method of code structure used for Identification Code (67)
- When specifying a routing sequence to be used for the shipment movement in lieu of specifying each carrier within the movement, use TD502 to identify the party responsible for defining the routing sequence, and use TD503 to identify the actual routing sequence, specified by the party identified in TD502.
- 2
- Standard Carrier Alpha Code (SCAC)
Free-form description of the routing or requested routing for shipment, or the originating carrier's identity
Bill of Lading Number
To specify identifying information
BM (Bill of Lading) - the bill of lading number provided by your carrier. This field is optional.
Code qualifying the Reference Identification
- BM
- Bill of Lading Number
Carrier's Reference Number (PRO/Invoice)
To specify identifying information
CN (Carrier Reference/PRO Number) - If your shipment has a PRO number, please enter it here. This field is optional.
Code qualifying the Reference Identification
- CN
- Carrier's Reference Number (PRO/Invoice)
Customer Order Number
To specify identifying information
Code qualifying the Reference Identification
- CO
- Customer Order Number
Customer Order Number
To specify identifying information
Code qualifying the Reference Identification
- IL
- Internal Order Number
Date/Time Reference
To specify pertinent dates and times
011 (Shipped) - Date the shipment is getting picked up. This field is required.
067 (Current Schedule Delivery) - Date the shipment is expected to be delivered.
Name
To identify a party by type of organization, name, and code
Code identifying an organizational entity, a physical location, property or an individual
- BT
- Bill-to-Party
- SF
- Ship From
- ST
- Ship To
Code designating the system/method of code structure used for Identification Code (67)
- 93
- Code assigned by the organization originating the transaction set
Code identifying a party or other code
- This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.
Address Information
To specify the location of the named party
Geographic Location
To specify the geographic place of the named party
Free-form text for city name
- A combination of either N401 through N404, or N405 and N406 may be adequate to specify a location.
Code (Standard State/Province) as defined by appropriate government agency
- N402 is required only if city name (N401) is in the U.S. or Canada.
Code defining international postal zone code excluding punctuation and blanks (zip code for United States)
Administrative Communications Contact
To identify a person or office to whom administrative communications should be directed
Code identifying the major duty or responsibility of the person or group named
- BD
- Buyer Name or Department
- IC
- Information Contact
Code identifying the type of communication number
- EM
- Electronic Mail
- TE
- Telephone
Complete communications number including country or area code when applicable
Code identifying the type of communication number
- TE
- Telephone
Hierarchical Level
To identify dependencies among and the content of hierarchically related groups of data segments
- The HL segment is the only mandatory segment within the HL loop, and by itself, the HL segment has no meaning.
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
- HL01 shall contain a unique alphanumeric number for each occurrence of the HL segment in the transaction set. For example, HL01 could be used to indicate the number of occurrences of the HL segment, in which case the value of HL01 would be "1" for the initial HL segment and would be incremented by one in each subsequent HL segment within the transaction.
Identification number of the next higher hierarchical data segment that the data segment being described is subordinate to
- HL02 identifies the hierarchical ID number of the HL segment to which the current HL segment is subordinate.
Code defining the characteristic of a level in a hierarchical structure
- HL03 indicates the context of the series of segments following the current HL segment up to the next occurrence of an HL segment in the transaction. For example, HL03 is used to indicate that subsequent segments in the HL loop form a logical grouping of data referring to shipment, order, or item-level information.
- O
- Order
Code indicating if there are hierarchical child data segments subordinate to the level being described
- HL04 indicates whether or not there are subordinate (or child) HL segments related to the current HL segment.
- 0
- No Subordinate HL Segment in This Hierarchical Structure.
- 1
- Additional Subordinate HL Data Segment in This Hierarchical Structure.
Purchase Order Reference
To provide reference to a specific purchase order
PRF01 (Purchase Order Number) - this is the same number that was sent on the 850. This will always need to match.
Reference Identification
To specify identifying information
Code qualifying the Reference Identification
Hierarchical Level
To identify dependencies among and the content of hierarchically related groups of data segments
- The HL segment is the only mandatory segment within the HL loop, and by itself, the HL segment has no meaning.
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
- HL01 shall contain a unique alphanumeric number for each occurrence of the HL segment in the transaction set. For example, HL01 could be used to indicate the number of occurrences of the HL segment, in which case the value of HL01 would be "1" for the initial HL segment and would be incremented by one in each subsequent HL segment within the transaction.
Identification number of the next higher hierarchical data segment that the data segment being described is subordinate to
- HL02 identifies the hierarchical ID number of the HL segment to which the current HL segment is subordinate.
Code defining the characteristic of a level in a hierarchical structure
- HL03 indicates the context of the series of segments following the current HL segment up to the next occurrence of an HL segment in the transaction. For example, HL03 is used to indicate that subsequent segments in the HL loop form a logical grouping of data referring to shipment, order, or item-level information.
- P
- Pack
Code indicating if there are hierarchical child data segments subordinate to the level being described
- HL04 indicates whether or not there are subordinate (or child) HL segments related to the current HL segment.
- 1
- Additional Subordinate HL Data Segment in This Hierarchical Structure.
Item Physical Details
To specify the physical qualities, packaging, weights, and dimensions relating to the item
Dimensions for each carton/pack.
Largest horizontal dimension of an object measured when the object is in the upright position
Shorter measurement of the two horizontal dimensions measured with the object in the upright position
Vertical dimension of an object measured when the object is in the upright position
Carrier Details (Quantity and Weight)
To specify the transportation details relative to commodity, weight, and quantity
TD101 (Packaging Code) - CTN will always be used to specify that this is a carton or box.
TD102 (Lading Quantity) - Total number of Items (Item Level) that are in the carton or box.
TD107 (Weight) - Gross weight of the carton or box.
Code identifying the type of packaging; Part 1: Packaging Form, Part 2: Packaging Material; if the Data Element is used, then Part 1 is always required
- CTN
- Carton
Number of units (pieces) of the lading commodity
Marks and Numbers
To indicate identifying marks and numbers for shipping containers
CP (Carrier-Assigned Package ID Number) - This is the tracking number assigned by your carrier for the carton or box shipment.
GM (SSCC-18 and Application Identifier) - This needs to be a GS1 formatted SSCC18 code and will need to match the label that is being put on the physical carton or box.
Code specifying the application or source of Marks and Numbers (87)
- MAN01/MAN02 and MAN04/MAN05 may be used to identify two different marks and numbers assigned to the same physical container.
- When MAN01 contains code "UC" (U.P.C. Shipping Container Code) and MAN05/MAN06 contain a range of ID numbers, MAN03 is not used. The reason for this is that the U.P.C. Shipping Container code is the same on every carton that is represented in the range in MAN05/MAN06.
- CP
- Carrier-Assigned Package ID Number
- GM
- SSCC-18 and Application Identifier
Hierarchical Level
To identify dependencies among and the content of hierarchically related groups of data segments
- The HL segment is the only mandatory segment within the HL loop, and by itself, the HL segment has no meaning.
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
- HL01 shall contain a unique alphanumeric number for each occurrence of the HL segment in the transaction set. For example, HL01 could be used to indicate the number of occurrences of the HL segment, in which case the value of HL01 would be "1" for the initial HL segment and would be incremented by one in each subsequent HL segment within the transaction.
Identification number of the next higher hierarchical data segment that the data segment being described is subordinate to
- HL02 identifies the hierarchical ID number of the HL segment to which the current HL segment is subordinate.
Code defining the characteristic of a level in a hierarchical structure
- HL03 indicates the context of the series of segments following the current HL segment up to the next occurrence of an HL segment in the transaction. For example, HL03 is used to indicate that subsequent segments in the HL loop form a logical grouping of data referring to shipment, order, or item-level information.
- I
- Item
Code indicating if there are hierarchical child data segments subordinate to the level being described
- HL04 indicates whether or not there are subordinate (or child) HL segments related to the current HL segment.
- 0
- No Subordinate HL Segment in This Hierarchical Structure.
Item Identification
To specify basic item identification data
Alphanumeric characters assigned for differentiation within a transaction set
- LIN01 is the line item identification
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- LIN02 through LIN31 provide for fifteen different product/service IDs for each item. For example: Case, Color, Drawing No., U.P.C. No., ISBN No., Model No., or SKU.
- IN
- Buyer's Item Number
- SK
- Stock Keeping Unit (SKU)
- UP
- U.P.C. Consumer Package Code (1-5-5-1)
- VN
- Vendor's (Seller's) Item Number
Identifying number for a product or service
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- IN
- Buyer's Item Number
- SK
- Stock Keeping Unit (SKU)
- UP
- U.P.C. Consumer Package Code (1-5-5-1)
- VN
- Vendor's (Seller's) Item Number
Identifying number for a product or service
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- IN
- Buyer's Item Number
- SK
- Stock Keeping Unit (SKU)
- UP
- U.P.C. Consumer Package Code (1-5-5-1)
- VN
- Vendor's (Seller's) Item Number
Item Detail (Shipment)
To specify line-item detail relative to shipment
Numeric value of units shipped in manufacturer's shipping units for a line item or transaction set
Product/Item Description
To describe a product or process in coded or free-form format
Code indicating the format of a description
- If PID01 equals "F", then PID05 is used. If PID01 equals "S", then PID04 is used. If PID01 equals "X", then both PID04 and PID05 are used.
- F
- Free-form
Code identifying the general class of a product or process characteristic
- 08
- Product
- 35
- Color
- SIZ
- Sizing
This level will be used only to specify pallet. If you are not sending pallets, please ignore this level.
Hierarchical Level
To identify dependencies among and the content of hierarchically related groups of data segments
- The HL segment is the only mandatory segment within the HL loop, and by itself, the HL segment has no meaning.
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
- HL01 shall contain a unique alphanumeric number for each occurrence of the HL segment in the transaction set. For example, HL01 could be used to indicate the number of occurrences of the HL segment, in which case the value of HL01 would be "1" for the initial HL segment and would be incremented by one in each subsequent HL segment within the transaction.
Identification number of the next higher hierarchical data segment that the data segment being described is subordinate to
- HL02 identifies the hierarchical ID number of the HL segment to which the current HL segment is subordinate.
Code defining the characteristic of a level in a hierarchical structure
- HL03 indicates the context of the series of segments following the current HL segment up to the next occurrence of an HL segment in the transaction. For example, HL03 is used to indicate that subsequent segments in the HL loop form a logical grouping of data referring to shipment, order, or item-level information.
- T
- Shipping Tare
Code indicating if there are hierarchical child data segments subordinate to the level being described
- HL04 indicates whether or not there are subordinate (or child) HL segments related to the current HL segment.
- 1
- Additional Subordinate HL Data Segment in This Hierarchical Structure.
Carrier Details (Quantity and Weight)
To specify the transportation details relative to commodity, weight, and quantity
TD101 (Packaging Code) - PLT will always be used to specify that this is a pallet.
TD102 (Lading Quantity) - Total number of cartons (Pack Level) that are on the pallet.
TD107 (Weight) - Gross weight of the pallet.
TD109 (Volume) - total volume measurement of the pallet.
Code identifying the type of packaging; Part 1: Packaging Form, Part 2: Packaging Material; if the Data Element is used, then Part 1 is always required
PLT will always be used to specify that this is a pallet.
Number of units (pieces) of the lading commodity
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
- LB
- Pound
Reference Identification
To specify identifying information
ZH (Carrier Assigned Reference Number) - This will be a tracking number for the specific pallet.
Code qualifying the Reference Identification
- ZH
- Carrier Assigned Reference Number
Marks and Numbers
To indicate identifying marks and numbers for shipping containers
Code specifying the application or source of Marks and Numbers (87)
- MAN01/MAN02 and MAN04/MAN05 may be used to identify two different marks and numbers assigned to the same physical container.
- When MAN01 contains code "UC" (U.P.C. Shipping Container Code) and MAN05/MAN06 contain a range of ID numbers, MAN03 is not used. The reason for this is that the U.P.C. Shipping Container code is the same on every carton that is represented in the range in MAN05/MAN06.
- GM
- SSCC-18 and Application Identifier
Hierarchical Level
To identify dependencies among and the content of hierarchically related groups of data segments
- The HL segment is the only mandatory segment within the HL loop, and by itself, the HL segment has no meaning.
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
- HL01 shall contain a unique alphanumeric number for each occurrence of the HL segment in the transaction set. For example, HL01 could be used to indicate the number of occurrences of the HL segment, in which case the value of HL01 would be "1" for the initial HL segment and would be incremented by one in each subsequent HL segment within the transaction.
Identification number of the next higher hierarchical data segment that the data segment being described is subordinate to
- HL02 identifies the hierarchical ID number of the HL segment to which the current HL segment is subordinate.
Code defining the characteristic of a level in a hierarchical structure
- HL03 indicates the context of the series of segments following the current HL segment up to the next occurrence of an HL segment in the transaction. For example, HL03 is used to indicate that subsequent segments in the HL loop form a logical grouping of data referring to shipment, order, or item-level information.
- P
- Pack
Code indicating if there are hierarchical child data segments subordinate to the level being described
- HL04 indicates whether or not there are subordinate (or child) HL segments related to the current HL segment.
- 1
- Additional Subordinate HL Data Segment in This Hierarchical Structure.
Item Physical Details
To specify the physical qualities, packaging, weights, and dimensions relating to the item
Dimensions for each carton/pack.
Largest horizontal dimension of an object measured when the object is in the upright position
Shorter measurement of the two horizontal dimensions measured with the object in the upright position
Vertical dimension of an object measured when the object is in the upright position
Carrier Details (Quantity and Weight)
To specify the transportation details relative to commodity, weight, and quantity
TD101 (Packaging Code) - CTN will always be used to specify that this is a carton or box.
TD102 (Lading Quantity) - Total number of Items (Item Level) that are in the carton or box.
TD107 (Weight) - Gross weight of the carton or box.
Code identifying the type of packaging; Part 1: Packaging Form, Part 2: Packaging Material; if the Data Element is used, then Part 1 is always required
- CTN
- Carton
Number of units (pieces) of the lading commodity
Marks and Numbers
To indicate identifying marks and numbers for shipping containers
CP (Carrier-Assigned Package ID Number) - This is the tracking number assigned by your carrier for the carton or box shipment.
GM (SSCC-18 and Application Identifier) - This needs to be a GS1 formatted SSCC18 code and will need to match the label that is being put on the physical carton or box.
Code specifying the application or source of Marks and Numbers (87)
- MAN01/MAN02 and MAN04/MAN05 may be used to identify two different marks and numbers assigned to the same physical container.
- When MAN01 contains code "UC" (U.P.C. Shipping Container Code) and MAN05/MAN06 contain a range of ID numbers, MAN03 is not used. The reason for this is that the U.P.C. Shipping Container code is the same on every carton that is represented in the range in MAN05/MAN06.
- CP
- Carrier-Assigned Package ID Number
- GM
- SSCC-18 and Application Identifier
Hierarchical Level
To identify dependencies among and the content of hierarchically related groups of data segments
- The HL segment is the only mandatory segment within the HL loop, and by itself, the HL segment has no meaning.
A unique number assigned by the sender to identify a particular data segment in a hierarchical structure
- HL01 shall contain a unique alphanumeric number for each occurrence of the HL segment in the transaction set. For example, HL01 could be used to indicate the number of occurrences of the HL segment, in which case the value of HL01 would be "1" for the initial HL segment and would be incremented by one in each subsequent HL segment within the transaction.
Identification number of the next higher hierarchical data segment that the data segment being described is subordinate to
- HL02 identifies the hierarchical ID number of the HL segment to which the current HL segment is subordinate.
Code defining the characteristic of a level in a hierarchical structure
- HL03 indicates the context of the series of segments following the current HL segment up to the next occurrence of an HL segment in the transaction. For example, HL03 is used to indicate that subsequent segments in the HL loop form a logical grouping of data referring to shipment, order, or item-level information.
- I
- Item
Code indicating if there are hierarchical child data segments subordinate to the level being described
- HL04 indicates whether or not there are subordinate (or child) HL segments related to the current HL segment.
- 0
- No Subordinate HL Segment in This Hierarchical Structure.
Item Identification
To specify basic item identification data
Alphanumeric characters assigned for differentiation within a transaction set
- LIN01 is the line item identification
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- LIN02 through LIN31 provide for fifteen different product/service IDs for each item. For example: Case, Color, Drawing No., U.P.C. No., ISBN No., Model No., or SKU.
- IN
- Buyer's Item Number
- SK
- Stock Keeping Unit (SKU)
- UP
- U.P.C. Consumer Package Code (1-5-5-1)
- VN
- Vendor's (Seller's) Item Number
Identifying number for a product or service
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- IN
- Buyer's Item Number
- SK
- Stock Keeping Unit (SKU)
- UP
- U.P.C. Consumer Package Code (1-5-5-1)
- VN
- Vendor's (Seller's) Item Number
Identifying number for a product or service
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- IN
- Buyer's Item Number
- SK
- Stock Keeping Unit (SKU)
- UP
- U.P.C. Consumer Package Code (1-5-5-1)
- VN
- Vendor's (Seller's) Item Number
Item Detail (Shipment)
To specify line-item detail relative to shipment
Numeric value of units shipped in manufacturer's shipping units for a line item or transaction set
Product/Item Description
To describe a product or process in coded or free-form format
Code indicating the format of a description
- If PID01 equals "F", then PID05 is used. If PID01 equals "S", then PID04 is used. If PID01 equals "X", then both PID04 and PID05 are used.
- F
- Free-form
Code identifying the general class of a product or process characteristic
- 08
- Product
- 35
- Color
- SIZ
- Sizing
Summary
Transaction Totals
To transmit a hash total for a specific element in the transaction set
- Number of line items (CTT01) is the accumulation of the number of HL segments.
If used, hash total (CTT02) is the sum of the value of units shipped (SN102) for each SN1 segment.
Total number of line items in the transaction set
Sum of values of the specified data element. All values in the data element will be summed without regard to decimal points (explicit or implicit) or signs. Truncation will occur on the left most digits if the sum is greater than the maximum size of the hash total of the data element.
-.0018 First occurrence of value being hashed.
.18 Second occurrence of value being hashed.
1.8 Third occurrence of value being hashed.
18.01 Fourth occurrence of value being hashed.
1855 Hash total prior to truncation.
855 Hash total after truncation to three-digit field.
Transaction Set Trailer
To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
Total number of segments included in a transaction set including ST and SE segments
Functional Group Trailer
To indicate the end of a functional group and to provide control information
Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element
Interchange Control Trailer
To define the end of an interchange of zero or more functional groups and interchange-related control segments
Sample 1
GS*SH*SENDERGS*RECEIVERGS*20231009*231933*000000001*X*004010~
ST*856*0001~
BSN*00*Shipment12345*20220719**0001~
HL*1**S~
TD5*B*2*UNSP**UNSP~
REF*BM*123123~
REF*CN*1213123~
REF*CO*Shipment12345~
DTM*011*20220629~
DTM*067*20220711~
DTM*010*20220627~
DTM*806*20220623~
N1*SF*testcompany~
N3*33 Test rd~
N4*Bristol*CT*06010*US~
PER*IC**EM*test@email.com*TE*8608888888~
N1*ST*Babylist Inc. (Millington)~
N3*3820 Micro Dr.~
N4*Millington*TN*38053*US~
N1*BT*Babylist~
N3*1625 Clay Street*Suite 500~
N4*Oakland*CA*94612*US~
PER*BD*Babylist*TE*1-888-827-7856~
HL*2*1*O~
PRF*Shipment12345***20220623~
REF*CO*Shipment12345~
HL*3*2*P~
PO4**********1*1*1*IN~
TD1*CTN*1****G*1*LB~
MAN*CP*123123~
HL*4*3*I~
LIN*1*VN*2000743*IN*2000743~
SN1**60*EA~
PID*F*08***4moms Breeze Waterproof Playard Sheet - Multi~
HL*5*3*I~
LIN*2*SK*2000802*VN*2000802~
SN1**40*EA~
PID*F*08***4moms mamaRoo - Multi Plush~
CTT*5*100~
SE*39*0001~
GE*1*000000001~
IEA*1*000000001~
Stedi is a registered trademark of Stedi, Inc. All names, logos, and brands of third parties listed on this page are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.