X12 867 Product Transfer and Resale Report
This Draft Standard for Trial Use contains the format and establishes the data contents of the Product Transfer and Resale Report Transaction Set (867) for use within the context of an Electronic Data Interchange (EDI) environment. The transaction set can be used to: (1) report information about product that has been transferred from one location to another; (2) report sales of product from one or more locations to an end customer; or (3) report sales of a product from one or more locations to an end customer, and demand beyond actual sales (lost orders). Report may be issued by either buyer or seller.
- ~ Segment
- * Element
- > Component
Interchange Control Header
To start and identify an interchange of zero or more functional groups and interchange-related control segments
Code to identify the type of information in the Authorization Information
- 00
- No Authorization Information Present (No Meaningful Information in I02)
Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
Code to identify the type of information in the Security Information
- 00
- No Security Information Present (No Meaningful Information in I04)
This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the receiver of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
Code to identify the agency responsible for the control standard used by the message that is enclosed by the interchange header and trailer
- U
- U.S. EDI Community of ASC X12, TDCC, and UCS
This version number covers the interchange control segments
- 00401
- Draft Standards for Trial Use Approved for Publication by ASC X12 Procedures Review Board through October 1997
A control number assigned by the interchange sender
Code sent by the sender to request an interchange acknowledgment (TA1)
- 0
- No Acknowledgment Requested
- 1
- Interchange Acknowledgment Requested
Code to indicate whether data enclosed by this interchange envelope is test, production or information
- I
- Information
- P
- Production Data
- T
- Test Data
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
- >
- Component Element Separator
Functional Group Header
To indicate the beginning of a functional group and to provide control information
Code identifying a group of application related transaction sets
- PT
- Product Transfer and Resale Report (867)
Code identifying party sending transmission; codes agreed to by trading partners
Code identifying party receiving transmission. Codes agreed to by trading partners
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Assigned number originated and maintained by the sender
Code used in conjunction with Data Element 480 to identify the issuer of the standard
- T
- Transportation Data Coordinating Committee (TDCC)
- X
- Accredited Standards Committee X12
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
- 004010
- Draft Standards Approved for Publication by ASC X12 Procedures Review Board through October 1997
Heading
Transaction Set Header
To indicate the start of a transaction set and to assign a control number
Code uniquely identifying a Transaction Set
- The transaction set identifier (ST01) used by the translation routines of the interchange partners to select the appropriate transaction set definition (e.g., 810 selects the Invoice Transaction Set).
- 867
- Product Transfer and Resale Report
Beginning Segment for Product Transfer and Resale
To indicate the beginning of the Product Transfer and Resale Report Transaction Set and transmit identifying data
Sample EDI:
BPT002422007010102~
Code identifying purpose of transaction set
- 00
- Original
Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier
- BPT02 identifies the transfer/resale number.
Date expressed as CCYYMMDD
- BPT03 identifies the transfer/resale date.
Name
To identify a party by type of organization, name, and code
Sample EDI:
N1DUAT&T MOBILITY94261802~
Code identifying an organizational entity, a physical location, property or an individual
- DU
- Resale Dealer
Code designating the system/method of code structure used for Identification Code (67)
- 94
- Code assigned by the organization that is the ultimate destination of the transaction set
Code identifying a party or other code
- This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.
Name
To identify a party by type of organization, name, and code
Sample EDI:
N1SNSTORE 12345692123456~
Code identifying an organizational entity, a physical location, property or an individual
- SN
- Store
- WH
- Warehouse
Code designating the system/method of code structure used for Identification Code (67)
- 92
- Assigned by Buyer or Buyer's Agent
Code identifying a party or other code
- This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.
Address Information
To specify the location of the named party
Sample EDI:
N31234 STOREFRONT ROAD~
N3SUITE 123~
Geographic Location
To specify the geographic place of the named party
Sample EDI:
N4ATLANTAGA30303US~
Free-form text for city name
- A combination of either N401 through N404, or N405 and N406 may be adequate to specify a location.
Code (Standard State/Province) as defined by appropriate government agency
- N402 is required only if city name (N401) is in the U.S. or Canada.
Code defining international postal zone code excluding punctuation and blanks (zip code for United States)
Detail
Product Transfer and Resale Detail
To indicate the start of detail information relating to the transfer/resale of a product and provide identifying data
Sample EDI:
PTD*SD~
This N1 Loop (under PTD) Required if BPT04 is '01' Product Transfer.
This N1 Loop (under PTD) Optional if BPT04 is '02' Resale.
Name
To identify a party by type of organization, name, and code
Sample EDI:
N1STNational Retailer92987654~
Code identifying an organizational entity, a physical location, property or an individual
- EN
- End User
- ST
- Ship To
Code designating the system/method of code structure used for Identification Code (67)
- 92
- Assigned by Buyer or Buyer's Agent
Code identifying a party or other code
- This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.
Additional Name Information
To specify additional names or those longer than 35 characters in length
Sample EDI:
N2*Additional Name~
Address Information
To specify the location of the named party
Sample EDI:
N31234 RETAIL ROAD~
N3WAREHOUSE 123~
Geographic Location
To specify the geographic place of the named party
Sample EDI:
N4ATLANTAGA30303US~
Free-form text for city name
- A combination of either N401 through N404, or N405 and N406 may be adequate to specify a location.
Code (Standard State/Province) as defined by appropriate government agency
- N402 is required only if city name (N401) is in the U.S. or Canada.
Code defining international postal zone code excluding punctuation and blanks (zip code for United States)
Administrative Communications Contact
To identify a person or office to whom administrative communications should be directed
Sample EDI:
PERICContact NameTE408-123-4567 x999~
Code identifying the major duty or responsibility of the person or group named
- IC
- Information Contact
Code identifying the type of communication number
- TE
- Telephone
Quantity
To specify quantity information
Sample EDI:
QTY321~
Item Identification
To specify basic item identification data
Sample EDI:
LIN*MGRG1100VIAVP12345UP123456789012~
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- LIN02 through LIN31 provide for fifteen different product/service IDs for each item. For example: Case, Color, Drawing No., U.P.C. No., ISBN No., Model No., or SKU.
- MG
- Manufacturer's Part Number
Identifying number for a product or service
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- VP
- Vendor's (Seller's) Part Number
Identifying number for a product or service
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- UP
- U.P.C. Consumer Package Code (1-5-5-1)
Unit Detail
To specify item unit data
Sample EDI:
UITEA12150*CP~
Price per unit of product, service, commodity, etc.
Seller's Invoice Number
To specify identifying information
Sample EDI:
REFIV1234567890123~
Code qualifying the Reference Identification
- IV
- Seller's Invoice Number
Serial Number
To specify identifying information
Sample EDI:
REFSE123456789012345~
Code qualifying the Reference Identification
- SE
- Serial Number
Administrative Communications Contact
To identify a person or office to whom administrative communications should be directed
Sample EDI:
PERICContact NameTE408-123-4567 x999~
Code identifying the major duty or responsibility of the person or group named
- IC
- Information Contact
Code identifying the type of communication number
- TE
- Telephone
Date/Time Reference
To specify pertinent dates and times
Sample EDI:
DTM00320070101~
Summary
Transaction Totals
To transmit a hash total for a specific element in the transaction set
- The number of line items (CTT01) is the accumulation of the number of LIN segments. If used, hash total (CTT02) is the sum of the value of quantities (QTY02) for each QTY segment.
Sample EDI:
CTT*1~
Transaction Set Trailer
To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
Total number of segments included in a transaction set including ST and SE segments
Functional Group Trailer
To indicate the end of a functional group and to provide control information
Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element
Interchange Control Trailer
To define the end of an interchange of zero or more functional groups and interchange-related control segments
Sample
GS*PT*SENDERGS*RECEIVERGS*20231120*040905*000000001*X*004010~
ST*867*0001~
BPT*00*242*20070101*02~
N1*DU*AT&T MOBILITY*94*261802~
N1*SN*STORE 123456*92*123456~
N3*1234 STOREFRONT ROAD~
N3*SUITE 123~
N4*ATLANTA*GA*30303*US~
PTD*SD~
N1*ST*National Retailer*92*987654~
N2*Additional Name~
N3*1234 RETAIL ROAD~
N3*WAREHOUSE 123~
N4*ATLANTA*GA*30303*US~
PER*IC*Contact Name*TE*408-123-4567 x999~
QTY*32*1~
LIN**MG*RG1100VIA*VP*12345*UP*123456789012~
UIT*EA*12150*CP~
REF*IV*1234567890123~
REF*SE*123456789012345~
PER*IC*Contact Name*TE*408-123-4567 x999~
DTM*003*20070101~
CTT*1~
SE*23*0001~
GE*1*000000001~
IEA*1*000000001~
Stedi is a registered trademark of Stedi, Inc. All names, logos, and brands of third parties listed on this page are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.