Additional product offered by the manufacturer, also known as a special deal for the purchaser
68
Gross Wage
78
Subcontractor - Labor and Materials
79
Subcontractor - Labor Only
A
Consolidated Weight
A1
Acids
A value, normally shown as a percent of the total, showing the content of all acidic structures contained in a solution of a known product
A2
Adsorption
A value defining the adhesion in an extremely thin layer of molecules (as of gases, solutes, or liquids) to the surfaces of solid bodies or liquids with which they are in contact
A3
Aging Time
The time taken, once a product has been initially manufactured, to come to a desired quality through undisturbed rest or curing; also, the time taken to bring to a desired use or maturity
A4
Aromatics
A value, normally shown as a percent of the total, showing the content of all molecules in a product containing at least one benzene ring
A5
Average Differential Pressure
Average difference between the upstream and downstream pressure through an orifice plate; expressed in inches of water
A6
Average Static Pressure
Pressure of the flowing gas stream; expressed in pounds per square inch
A7
Flame Projection Distance
The distance that a flame would project from an aerosol can containing the subject material if ignited
A9
Exposure
A measure of the quantity of a specified form of energy or mass coming into contact with another specified object or space
AA
Alternating Current
AA1
Storage Temperature After Opening
Specifies the temperature at which the product is to be maintained after the seal has been broken and the product has been exposed to the environment.
AA2
Storage Temperarure After Removing Overwrap
Specifies the temperature at which the product is to be maintained after removing a product's protective overwrap or moisture barrier.
AA3
Storage Temperature After Reconstitution
Specifies the temperature at which the product is to be maintained after adding liquid to dilute or mix the product.
AAA
Acetic Acid
AAB
Aflatoxin (United States)
AAC
Anethole Content
AAO
Added Oil
AAP
AC-apparent Power
Power measurement of a material subject to a magnetic induction
AAS
Acid Solubles
AB
Activation Energy
ABO
Absorbance
The negative base 10 logarithm of the ratio of the radiant power transmitted by a sample to the radiant power incident upon the sample
ABR
Abrasion
The qualitative ability of a surface to wear, grind, and rub away or to be worn away
ABS
Absorbency
The rate at which a specimen takes up liquids or the amount of liquid required to saturate the specimen
AC
Actinium
ACN
Acid Number
The quantity of base required to titrate acidic constituents present
AD
Ambient Temperature
ADH
Adhesion
The molecular attraction between two or more bodies in contact
ADM
Dye Manufacturing Units
AE
Argon
AF
Angle of Bend
AG
Americium
AGE
Inventory Age
The age of inventory from the date or time of production to the present date or time
AGI
Aggressive Index
AH
Astatine
AI
Acidity
AJ
Aim Gage
Physical dimension a producer is to "aim" toward producing or supplying
AK
Volatile Organic Compounds (VOCs)
Organic compounds whose existence is calculable or detectable by methods specified by the U.S. Environmental Protection Agency
AL
Spine Show
ALK
Alkalinity
The quantitative capacity of aqueous media to react with hydrogen ions
ALN
Alkalinity Number
The quantity of acid required to titrate basic constituents present
ALP
Alpha-Cellulose
The average molecular chain length of pure long-chain cellulose in pulp
ALT
Alternate Measurement
AM
Average Speed
AMI
Amines
Content of basic compounds derived from ammonia by replacement of hydrogen by one or more univalent hydrocarbon radicals or other non-acidic organic radicals
AMW
Average Molecular Weight
The average of the sums of the weights of molecules' constituent atoms in an object which contains more than one type of molecule
AMY
Amylograph
AN
Flute Test
ANT
Antibiotics
AO
Alcohol
Content of Alcohol for the product based on the serving size provided
AOE
Ethyl Alcohol
AOX
Antioxidant
A substance that increases a product's oxidation resistance
AP
Average Pressure
API
API Gravity
A special hydrometer scale recommended for exclusive use in the U.S. Petroleum Industry for liquids lighter than water
APP
Appearance
The visible impression of an item
AR
Beta Carotene
The vitamin Beta Carotene in the product based on the nutritional serving size provided
AS
Ash Fusion Temperature
ASA
Acid Insoluble Ash
ASC
Average Servings Per Case
ASH
Ash
The inorganic component of product
ASY
Assay
The quantitative determination of the amount of the major or active component of an item
AT
Additive
AU
Number of Units Projected
AV
Age
AVT
Average Temperature
AW
Remaining Economic Life
AX
Remaining Physical Life
AXL
Axle Length
AY
Number of Comparable Sales
AZ
Arbor Size
B
Billed Weight
B0
Blemishes
B1
Base Number
A number that identifies the ability of a compound to react with an acid to either take up a proton from the acid or to give up unshared electrons to an acid to form a salt
B2
Number of Comparable Listings
B3
Present Land Use
B4
Subject Phase Dwelling Units
B5
Octanol/Water Partition Coefficient
A scientific measure of the relative solubility of a material in octonol versus its solubility in water
B6
Total Project Dwelling Units
B7
Biotin
The mineral Biotin in the product based on the nutritional serving size provided
B8
Carbohydrates
Carbohydrates in the product based on the nutritional serving size provided
B9
Cholesterol
Cholesterol in the product based on the nutritional serving size provided
BA
Barium
BB
Beryllium
BBC
Broken Cookies
BBF
Butterfat
BBX
Brix
BC
Billet Size
BD
Bias
BDP
Perforation Bottom Depth
The deepest depth below surface level for perforations in the well casing
BE
Boron Factor
BF
Brinell
BG
Berkelium
BGL
Beta Glucan
BH
Bromine
BHF
Bottomhole Pressure - Flowing
Fluid pressure at the deepest depth in the well bore while production is flowing from the well; measured during well testing and completion operations
BHS
Bottomhole Pressure - Shutin
Fluid pressure at the deepest depth in the well bore with the well annulus closed; measured during well testing and completion operations
BI
Edible
Indicates what % of the product is edible. The serving size is based on the edible portion of food and not on inedible components, e.g. bone, seed, shell, etc.
BIC
Bark in Chips
The ratio of tree bark to wood chips; indicates the level of one type of contamination in production of wood pulp
BJ
Burst Index
The burst pressure of a paper or pulp sheet expressed per unit basis weight
BK
Bulk
BL
Blisters
BM
Energy
Energy in kilojoules for the product based on the nutritional serving size provided
BN
Bend
The ability of the product to undergo bending operation in forming
BND
Amount Bound in Material
Amount that cannot be removed by volatilization, solvent extraction, or melting
BO
Lateral Bow (Camber)
BOR
Boiling Range
The temperatures normally used or required to bring a substance to boil at different barometric pressures
BP
Boiling Point
BQ
Breaks
BQP
Base Quantity per Package
Actual mass of a raw chemical without the salt, contained within a single package. Calculation: Net weight of the package x Pure Base Ratio.
BR
Brightness
BRS
Breaking Strength
The greatest longitudinal stress a substance can bear without tearing apart
BS
Folate
Folate in the product based on the nutritional serving size provided
BSW
Percent Bottom Sediment and Water
BT
Bursts
BU
Buckles
BUD
Bulk Density
BV
Moisture Loss %
The % of moisture loss after cooking the product
BW
Basis Weight
BX
Blood Alcohol
BY
Monounsaturated Fat
Monounsaturated Fat in the product based on the nutritional serving size provided
BZ
Niacin-B3
The vitamin Niacin B3 milligrams for the product based on the nutritional serving size provided
C
Actual New Repeated for Combination
C0
Color Grade
C1
Carbonyl
The measurement of the bivalent carbon-oxygen radical occurring in aldehydes, ketones, carboxylic acids, esters, acid halides, and amides; also, the measurement of the compound carbonyl radical with a metal
C2
Catalyst
The measurement of any number of substances used in the production of a final product or retained in the final product that initiates a chemical reaction and enable the product to proceed under milder conditions than otherwise possible
C3
Maximum Contraction
A result from a process that measures the total contraction of a sample
C4
Color Quadrant
C5
Omega 3 Fatty Acids
The Omega 3 Fatty Acids in grams for the product based on the nutritional serving size provided
C6
Omega 6 Fatty Acids
The Omega 6 Fatty Acids in grams for the product based on the nutritional serving size provided
C7
Organic Acids
The content of Organic Acids in milligrams for the product based on the nutritional serving size provided
C8
Pantothenic Acid
Pantothenic Acid in the product based on the nutritional serving size provided
C9
Polyunsaturated Fat
Polyunsaturated Fat in the product based on the nutritional serving size provided
CA
Caliper
CAA
Citric Acid
CAF
Caffeine
CAL
Calories
A calorie is the amount of heat required to raise the temperature of one kilogram of water one degree Celsius
CAT
Catch Weight
CAU
Caustic Reaction Severity
The severity of chemical reaction due to caustic present as the primary reactant
CAY
Case Yield
CB
Protein
Protein in grams for the product based on the nutritional serving size provided
CC
Celsius
CCA
Cinnamic Aldehyde
CCF
Composite Corrected Factor
CCG
Combined Center of Gravity
CCL
Chocolate Liquor
CCT
Cook Test
CD
Compression
CE
Capacitance In
CF
Capacitance Out
CFF
Calories from Fat
CFI
Crude Fiber
CFS
Container Forward Setting
The distance attached appurtenances extend beyond the nose of the container
CG
Cadmium
CGP
CO2 Gas Production
CGR
Color Grayness RD
Lightness or darkness of cotton
CH
Cesium
CHA
Chemical Addition Rate
The quantity of chemical expressed by weight or volume added to manufacturing or testing process per unit of time
CHB
Chlorophyll-a
CHC
Concentration of Hazardous Component
CHG
Rate of Change
The increase or decrease in polarity and amount of a change per unit of time
CHL
Chlorides
Amount of chlorides in the water or brine produced from a well
CI
Curium
CIV
Cuene Intrinsic Viscosity
The average molecular weight of cellulose molecules in product
CJ
Cycle Time
CK
Californium
CL
Cladding Thickness(% of Composite Thickness)
CLA
Clarity
The clearness or transparency of an item
CLB
Calibration
CLN
Cleanliness
The impurities remaining in and/or on the product
CLO
Chloramphenicol
CLS
Calculation Size
Calculation basis used for the nutritional facts panel of a product
CM
Cures
CN
Chlorine
CO
Core Loss
COC
Canola Oil Coating
COF
Coefficient Factor
COH
Coercive Force
Magnetizing force at which magnetic induction is zero
COL
Color
The aspect of appearance dependent upon the wavelength of incident, reflected or transmitted, and observed light
CON
Concentration
The relative amount of a component of a sample of product containing multiple components
COR
Corrosiveness
The ability to destroy gradually by chemical reaction
COS
Cost
COT
Content
The amount of specified material contained
COV
Coverage
The statement from a manufacturer or supplier specifying the area that a product will cover. Examples: A statement that a gallon of paint will cover 300 square feet, or a statement that a carton of ceramic tile will cover 5 square meters
CP
Crimp
CPF
Casing Pressure - Flowing
Fluid pressure within the casing, or outermost tubing used to isolate the well from the surrounding geology, while production is flowing from the well; measured during well testing and completion operations
CPP
Count per Pound
CPS
Casing Pressure - Shutin
Fluid pressure within the casing, or outermost tubing used to isolate the well from the surrounding geology, with the well annulus closed; measured during well testing and completion operations
CPT
Cup Test Adhesion
Quantitative calculation of galvanneal coating loss during cup formation
CQ
Cuts
CR
Crosswise Spacing
CRF
Free Chlorine Residual
CRL
Compression Relaxation
CRN
Crown
Increase in the thickness or height of a rolled product at the center compared to the thickness at the edge
CRT
Total Chlorine Residual
CS
Cross Section
CSC
Choke Size - Casing
The diameter of the orifice in the casing through which liquids flow
CSR
Cost Realism
CST
Choke Size - Tubing
The diameter of the orifice in the tubing through which liquids flow
CT
Center-to-center
CTB
Classes that Blend
CTG
Coating
Product applied to the top of a substrate or base
CTT
Contact Time
CU
Coil Curvature
CUR
Curcumin
CUT
Cure Time
The time required to prepare a product by chemical or physical processing for storage or use
CV
Riboflavin-B2
The vitamin Riboflavin in the product based on the nutritional serving size provided
CW
Cuttable Width
CWT
Charge Weight
CX
Calculated Value
CY
Contamination
The yellowness of cotton; correlates with the spotted and light spotted part of the classer grade; higher values represent more yellowness
CYB
Color Yellowness (+B)
CZ
Saturated Fat
Saturated Fat in the product based on the nutritional serving size provided
D
Destination Weight Agreement
D0
Diacetyl
D1
Maximum Dilatation
A result from a process that measures the total expansion of a sample
D2
Dispersing Agent
The measurement of the amount of substance that promotes the formation and stabilization of a dispersion of one substance in another
D3
Drying Agent
The measurement of the amount of substance in a product that is used to extract liquid from either the manufacture or use of a product
D4
Dry Point
A temperature measurement used in a distillation process to identify the temperature at which a product becomes dry
D5
Wear
Measure of deterioration
D6
Horizontal
D7
Distillation Fraction
D8
Vertical
D9
Dots per Inch
DA
Delta Value A
DAT
Datum Depth
Depth below ground surface at which a measurement is taken within a well
DB
Delta Value B
DBL
Doubles
DC
Ductile Class
DCC
Defect Contrasting Classes
DCK
Dockage
DCT
Dirt Count
The amount of visible contamination
DD
Depth of Dents
DDW
Defect Damaged Wheat
DE
Defects
DEM
De Minimis Level
A measurable level of significance below which a requirement does not apply
DF
Distance Across Flats
DFS
Defect Skins
DG
Direct Current
DH
Dysprosium
DHP
Defect Hulls
Covers Hulls and Partial Hulls
DHW
Defect Heat Damaged Wheat
DI
Diameter
DIA
Diastase
DIK
Defect Insect Damaged Kernels
DIL
Dilution Factor; An amount by which a quantity is diluted in order to be read on an instrument scale
DIR
Distillation Range
The temperature range in which a defined amount of material boils under specified conditions
DIS
Dispersion
The ease with which one substance mixes with another
DJ
Dominant Wave Length
DK
Color Bits in Palette
DL
Delta Value L
DLC
Dial Count
DM
Dual Amplitude
DME
Dichloromethane Extract
The volatile components of pulp products
DMF
Distributed Meter Factor
DN
Density
DO
Compressed File Size
DOC
Double Olsen Cup
Visual observation rating zinc adherence after a cup
forming operation
DOG
Defect Other Grains
DP
Depth
DPM
Degree of Polymerization
The average number of monomer units per polymer molecule in product
DQ
Soluble Fibre
Soluble Fibre in the product based on the nutritional serving size provided
DR
Delta R
Planar variation of r value which is defined by the following equation: (r0 - 2r45 + r90)/2
DRS
Dark Specs
DRW
Drained Weight
DRY
Dryness
A product specification in pulp, paper, and chemicals
DS
Distance Between Points
DSK
Defect Shrunken and Broken Kernels
DSP
Defect Splits
DT
Distance From Base Point
DTO
Defect Total
DU
Draw Tension
DV
Starch
Total Starch in the product based on the nutritional serving size provided
DW
Width, Boxcar Door
DWC
Defect Wheat of Other Classes
DWP
Dew Point
The temperature at which a vapor begins to condense
DX
Sugar
Total Sugar in the product based on the nutritional serving size provided
DXE
Dextrose Equivalent
DXI
Invert Sugar
DY
Dyeability
DYC
Dye Content
DZ
Sugar Alcohol
The Sugar Alcohol content in grams and % of DV/RDI (Daily Value / Recommended Daily Intake) for the product based on the serving size provided
E
Estimated New Weight
E0
Extraneous Matter
E1
End
Identifies a value measured at the end of a testing process or range of test results
E2
Thiamin-B1
The vitamin Thiamin in the product based on the nutritional serving size provided
E3
Total Dietary Fibre
Total dietary fibre in the product based on the nutritional serving size provided
E4
Total Fat
Total Fat in the product based on the nutritional serving size provided
E5
Transfatty Acids
Transfatty Acids in the product based on the nutritional serving size provided
E6
Vitamin B12
Vitamin B12 in the product based on the nutritional serving size provided
E7
Vitamin B6
The Vitamin B6 in the product based on the nutritional serving size provided
E8
Vitamin C
Vitamin C in the product based on the nutritional serving size provided
E9
Vitamin D
Vitamin D in the product based on the nutritional serving size provided
E90
Vitamin D3
EA
Elongation
EB
Edge Burr
EC
English Coil Dimensions
ED
Eddy
EE
Einsteinium
EF
Europium
EFC
Effective Carbohydrates
EG
Equivalent Temperature
EH
Erbium
EI
Expansion
EJ
Electrical Conductivity
EK
Vitamin E
Vitamin E in the product based on the nutritional serving size provided
EKA
Vitamin E Acetate
EL
Elasticity
The springiness or rebound of a deformed material
ELC
Exposure Ceiling: Threshold Limit Value
ELE
Elevation
ELI
Immediately Dangerous to Life and Health
A measurable level beyond which the most stringent safety measures, such as evacuation, must be taken
ELL
Explosion Limit
ELO
Occupational Safety and Health Administration (OSHA) Permissible Exposure Limit
ELP
Occupational Safety and Health Administration (OSHA) Permissible Exposure Limit Ceiling
ELS
American Conference of Government Industrial Hygienists (ACGIH) Threshold Limit Value: Short-Term Exposure
ELT
American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value: Time Weighted Average
ELV
Unshielded Exposure Rate
ELW
American Industrial Hygienists Association (AIHA) Work Environment Exposure Level (WEEL)
ELX
American Industrial Hygienists Association (AIHA) Work Environment Exposure Level (WEEL): Time Weighted Average
EM
Elmendorf Tear
EMB
Bones
EMD
Ethoxylated Mono & Diglyceride
EN
Entanglement
ENZ
Enzyme
EO
Vitamin K
Vitamin K in the product based on the nutritional serving size provided
EO1
Vitamin K1
EOR
Ethylene Oxide Residue
EP
Exciting Power
EPL
Expected Product Life
ES
Edge
ESO
Essential Oil
EST
Esterification
ET
End Point
ETH
Ethoxyquin
ETV
Ethyl Vanillin Content
EVL
Evaporation Loss
The amount of material lost under specified conditions
EVR
Evaporation Rate
EW
Empty Weight
EX
Eccentricity
EXC
Extractable Color
EXH
Exhaust Benzene Emissions
Benzene emissions from the exhaust system
EXT
Extractables
Material removed by solvent extraction
F
Deficit Weight
F0
Fat
F1
Fire Point
The measurement of the temperature at which combustion initially begins for any number of substances
F2
Radiated Power
F3
Output Power (Peak Envelope)
F4
Height above Average Terrain
F5
Ground Elevation
F6
Height to Tip
F7
Radius from a Location
F8
Radius from Coordinates
F9
Operating Hours
FA
Fluorine
FAA
Fat Acidity
FAI
Fat As Is
FAN
Falling Number
FAO
Free Fatty Acid As Oleic
FAR
Farinograph Arrival Time
FAW
Face Weight
Pertaining to the top of a carpet, the ounce weight per square yard
FB
Flare
FBP
Acetate Break Point
The chemical reactivity of cellulose in the acetylation process
FBU
Fat due to Butterfat
FC
Short Cycle Flatness
FCB
Food Drug & Cosmetics (FD&C) Blue
FCM
Fat left in Cooked Meat
FCR
Food Drug & Cosmetics (FD&C) Red Number 4
FCY
Food Drug & Cosmetics (FD&C) Yellow Number 5
FD
Frequency of Operation
FDB
Fat on a Dry Basis
FE
Fermium
FEC
Fenchone Content
FF
Francium
FFA
Free Fatty Acid
FG
Freezing Point
FH
Finish
FI
Filament Count
FIB
Fiber
FIL
Filter Number
The filterability of a solution expressed in units combining the porosity of the filter medium and the time required for a standard volume of solution to pass through the filter at specific pressures
FIM
Film Integrity Test
FIN
Fineness
Mean fiber width in micrograms per inch
FIT
Filterability
The ability of a substance to pass through a given medium under specified conditions
FIV
Final Viscosity
FJ
Face Width
The width of the oscillate wound material
FK
Fluid Consistency
Descriptor of a fluid expressed as the ratio, by weight, of total suspended solids to liquid
FL
Longitudinal Flatness
FLD
Fluid Point
The point at which the fused mass has spread out in a nearly flat layer with a maximum height of 1/16 in. (1.6 mm)
FLN
Fiber Length
Instrument method of measuring length in hundredths of an inch
FLP
Fluid Level Above Pump
The depth of well liquids above the location of a subsurface pump unit
FLT
Fluting
Visual observation of a formed cylinder to determine if fluting is present
FLU
Fluoride
FLV
Flavor Threshold
FML
Flammability Limits
FMP
Fat Melting Point
FMZ
Flammability
FN
Flatness
FNL
Fines Retained on Screen
Amount of particles in a material that is larger than a defined unit
FNS
Fines
The amount of particles in a material that are smaller than a defined limit
FNY
Finished Yield
Number of finished portions the product will yield.
FOA
Foam
The dispersion of gas in a liquid or solid
FOB
Finishing Oil Honey Roasted
FOC
Finishing Oil Roasted
FOH
Front Over-Hang of Vehicle
FOI
Fouling Index
The result of a procedure which represents the accumulation of deposits of ash on superheater, boiler and economizer tubes
FOM
Foreign Material
FOR
Foreign Matter
The visible contamination in a material
FP
Flashpoint
FPV
Acetate Plugging Value
The weight of a liquid that passes through a given area of filter at a constant filtration pressure before the filter becomes completely blocked or plugged; denotes the filtration quality of viscose or solutions of cellulose acetate
FQ
Frequency
FR
Flow Rate
FRC
Fresh Cut
FRM
Final Raisin Moisture
FRU
Fructose
FS
Fold Strength
FSI
Free Swelling Index
The result of a procedure regarding the caking properties of coal when burned as fuel
FT
Flange Thickness
FU
Azimuth
FUD
Full Load
FUP
Functionality Penetrometer
FV
Transverse Flatness
FW
Flange Width
FX
Filler
FY
Beam
FZ
Output Power (Mean RF)
G
Gross Weight
G1
Gutter
G2
Grain Size
The internal grain morphology of a sample
G3
Tilt
G4
G-Force
GA
Grain
GB
Guided Bends Root
GC
Gadolinium
GD
Gold
GE
Guided Bends Face
GEL
Gel
Viscous jelly-like material
GES
Gel Strength
GF
Guided Bends Side
GG
Gauge
GGR
Gas Gravity
The density of the produced gas relative to the density of air at standard temperature and pressure
GH
Gallium
GI
Grit, Brushed
The percentage of a sample of TiO2 (water dispersed) which remains on a 325 mesh screen after washing and brushing the screen and surface to break apart soft agglomerates
GIR
Gas Injection Test Rate
Volume of gas injected into the well bore during a 24-hour test period
GJ
Grit, Unbrushed
The percentage of a sample of TiO2 (water dispersed) which remains on a 325 mesh screen after washing the screen surface
GK
Tinting Strength
A measure of the hiding power of a titanium dioxide sample obtained by comparing the green (Y) reflectance of a tinted waterbased formula against that of a standard
GL
Gloss
GLC
Glycerol
GLE
Ground Level Elevation
GLY
Glycerin
GM
Emulsion Gloss
The 60-degree gloss of a pigment sample in a waterbased paint formula
GN
Gross to Net Conversion Factor
GO
Particle End Point
The reading on a Hegman gauge, below the fineness line, at which the population of scattered particles stops
GOA
Granulation on 3/8 Inch U.S. Standard Sieve (USSS)
GOB
Granulation on Number 10 U.S. Standard Sieve (USSS)
GOC
Granulation on Number 100 U.S. Standard Sieve (USSS)
GOD
Granulation on Number 14 U.S. Standard Sieve (USSS)
GOE
Granulation on Number 20 U.S. Standard Sieve (USSS)
GOF
Granulation on Number 25 U.S. Standard Sieve (USSS)
GOG
Granulation on Number 30 U.S. Standard Sieve (USSS)
GOH
Granulation on Number 40 U.S. Standard Sieve (USSS)
GOI
Granulation on Number 50 U.S. Standard Sieve (USSS)
GOJ
Granulation on Number 6 U.S. Standard Sieve (USSS)
GOK
Granulation on Number 60 U.S. Standard Sieve (USSS)
GOL
Granulation on Number 80 U.S. Standard Sieve (USSS)
GOM
Granulation on 1/2 Inch U.S. Standard Sieve (USSS)
GON
Granulation on 1/4 Inch U.S. Standard Sieve (USSS)
GOR
Gas-to-Oil Ratio
A measure of the gas produced from a hydrocarbon well relative to the oil produced
GP
Group Package Separation
GQ
Scattered Particles
The number of scattered particles (visible defects) in a drawdown on a Hegman gauge between the fineness line and the particle end point
GR
Gravity
GRA
Gas Test Rate
Volume of gas produced from a well during a 24-hour test period
GRI
Graininess
The crystallinity of a substance
GRN
Granulation
GS
Carbon Black Undertone
The blue/amber ratio (Z/X) of the reflectance of a paste made of titanium dioxide and carbon black; a measure of the TiO2 particle size
GT
Glass Transition Temperature
Temperature at which an amorphous material changes from a brittle to a plastic state
GTA
Granulation thru Number 100 U.S. Standard Sieve (USSS)
GTB
Granulation thru Number 140 U.S. Standard Sieve (USSS)
GTC
Granulation thru Number 18 U.S. Standard Sieve (USSS)
GTD
Granulation thru Number 20 U.S. Standard Sieve (USSS)
GTE
Granulation thru Number 200 U.S. Standard Sieve (USSS)
GTF
Granulation thru Number 50 U.S. Standard Sieve (USSS)
GTG
Granulation thru Number 60 U.S. Standard Sieve (USSS)
GTH
Granulation thru Number 7 U.S. Standard Sieve (USSS)
GTI
Granulation thru 3/8 Inch U.S. Standard Sieve (USSS)
GTJ
Granulation thru Number 6 U.S. Standard Sieve (USSS)
GW
Gross Weight, Maximum
H
Ground Water Reference Point
Elevation of Ground Water Relative to the Mean Sea Level
H1
Heavies
A relative term that is used to identify the weight percent of all molecules beyond the peak identified as the molecule being tested for in a gas chromatograph result; also, all molecules that have a boiling point higher than the molecule being tested
H2O
Water Volume
H8
Net Explosive Weight
H9
Recommended Exposure Limit
HA
Hydro Pressure
HAL
Total Quantity of Halogens contained in the shipment
HAR
Hardening Rate
HAZ
Haze
HB
Heavy Aluminas
HC
Helium
HCG
Horizontal Center of Gravity
HCH
Distance to Endpoint
HCI
Emission Factor
HCJ
Heat Content
HCK
Pollutant Emission
HCL
Population
HCM
Release Duration
HCN
Released Quantity
HCO
Release Rate
HCP
Sulfur Content
HCQ
Wind Speed
HCR
Acute Toxicity
HCS
Chronic Toxicity
HCT
Discharges
HCU
Effectiveness
HCV
Fertilization
HCW
Samples in Compliance
HCX
Toxicity
HD
High Propagation Delay Time
The time between the specified reference points on the input and output waveforms, with the output changing from the defined low level to the defined high level
HE
Heavy Silicates
HEX
Hexanal
HF
Hardness
HG
Heavy Sulfides
HH
Heavy Globular Oxides
HHW
Hemispherical Point
The point at which the cone has fused down to a hemispherical lump at which point the height is one half the width of the base as shown by the fourth cone
HI
Hafnium
HIB
High Boilers
The components of a mixture which boil at a higher temperature than the rest of the mixture
HJ
Holmium
HK
Human Factors
HL
Heat Loss
Quantity of original thermal energy removed
HM
Height, Maximum
HO
Holes
HOC
Heat of Combustion
HP
Height of Tread Plate Pattern
HR
Height of Runners
HT
Height
HTE
Heat Equivalency
HVM
Heavy Metals
The metals of atomic weight greater than sodium that form soaps of reaction with fatty acids
HWS
Softening Point
The point at which the cone has fused down to a spherical lump in which the height is equal to the width at the base
HYD
Hydroxyl Number
The alkalinity of oil, fat, wax or other substances
HYP
Hydroxyporpylcellulose
HZ
Hazepoint
HZC
Hazardous Component
I
Heat Input
IA
Imperfections - Thicks
Thick places in the yarn
IB
Impact Energy
IC
Incremental Distance
ID
Inside Diameter
IDE
Identification
The distinguishing characteristics of a material for verification purposes
IE
Imperfections - Thins
Thin points in the yarn
IF
Input Low Voltage
IG
Granulated Ingot Size
IGA
Autoignition Temperature
IGR
Input Gas Rate
Volume of gas input during a 24-hour test period
IH
Input Current
IHV
Inherent Viscosity
II
Input Setup Time
IJ
Input Hold Time
IK
Indium
IL
Imperfections - Neps
Short, broken or immature fibers in the yarn
IM
Iridium
IMA
Impact Adhesion
Visual observation rating zinc adherence after using a dropped ball
IMP
Impurities
The amount of components other than the major or active components in an item
IN
Input Low Current
The current flowing out of input when a specified low-level voltage is applied to that input
INC
Incremental Items
The item synchronization calculation is based upon the items added to the customer's catalog.
IND
Initial Deformation Point
The point at which the first rounding of the apex of the cone occurs
INS
Insolubles
The residue remaining after dissolving an item in a solvent
INV
Invertase
IO
Input High Current
The current flowing out of an input when a specified high level voltage is applied to that input
IP
Input Leakage Current
The current flowing into an input when the maximum allowed voltage is applied to that input
IPI
Primary Irritation Index
IQ
Input Clamp Diode Voltage
The most negative voltage at an input when the specified current is forced out of that input terminal
IR
Ideal Diameter
IRA
Inclusion Rating
The internal nonmetallic particles in the product
IS
Input High Voltage
ISF
Insoluble Fiber
ISP
Incubated Spindown
IT
Interrupt Pulse Period
ITD
Integrated Differential
IU
Interrupt Setup Time
IV
Iodine
IW
Incrustation Factor
IX
Inside Diameter, Minimum
IXD
Index Differential
IY
Induction
Magnetic force
IZ
Ingot Pound Size
JA
Junction Temperature
JA1
Boot Circumference
Measurement of the inside of the boot at the largest part of the upper calf.
JA2
Boot Shaft
Measurement from the middle of the arch up the outsole to the top of the boot shaft.
JA3
Heel Height
Measurement at the outside of the heel, from the middle of the heel to the sole.
JA4
Pant Inseam
Measurement of the inner-leg length of the pants, from the top of the thigh to the bottom of the cuff.
JA5
Shoe Platform Height
Measurement at the outsole, from the foot bed to the sole.
JA6
Sleeve
Measurement of the sleeve from the base of the neck (middle of shoulder) across the shoulder, and down the arm to the bottom of the cuff.
JA7
Waist
Measurement of the circumference of an item as measured around the waist. Any fasteners should be fastened.
JA8
Watch Case Depth
Measurement of the watch case as measured from the top of the bezel to the watch back.
JB1
Watch Case Height
Measurement of the watch case as measured from the top-most point (above the 12) to the lowest most point (below the 6).
JB2
Watch Case Width
Measurement of the watch case as measured from the left-most (left of the 9) to the right-most point (right of the 3).
JB3
Watch Strap Length
Measurement of the watch band/strap from tip to top as laid flat. If the band/strap is one piece, this is also known as the watch band/strap circumference.
JB4
Watch Strap Width
Measurement of the watch band/strap width from side to side from its widest point, as laid flat.
JB5
Back Rise
Measurement from the top of the waistband to the crotch at the back of the pants.
JB6
Bag Strap Drop
Measurement of bag (handbag) shoulder/handle length from the top of the bag to the peak of the strap/handle.
JB8
Circumference
Measurement of the linear distance around the edge of a closed curve or circular object.
JC1
Extended Depth
Measurement of the expanded depth of an item, for items where the item can be expanded. Example includes a duffle bag with closures, which open to allow more contents inside.
JC2
Eyewear Bridge Width
Measurement of the width of the bridge. Measured as worn from the edge of one lens/frame to the edge of the opposite lens/frame, where the eyewear would rest on the nose of the wearer.
JC3
Eyewear Frame Width
Measurement of the width of the frame. Measured as worn from the wearer's temple to the wearer's other temple.
JC4
Eyewear Lens Height
Measurement of the height of the lens, not including the frame. Measured as worn from the wearer's cheek to the wearer's forehead.
JC5
Eyewear Lens Width
Measurement of the width of the lens, not including the frames. Measured as worn from the wearer's nose to the wearer's temple.
JC6
Eyewear Temple Length
Measurement of the length of the temple. Measured as worn from the wearer's temple to the end of the ear wrap/stem.
JC7
Footsies Shoulder to Toe
One piece garment. Measurement from the top of the shoulder to the base of the heel, as measured along the back of the garment.
JC8
Front Rise
Measurement from the top of the waistband to the crotch, at the front of the pants.
JD1
Handle Length
Measurement of a handle from its attachment to the item, to the tip.
JD2
Hidden Platform Height
Measurement at the outsole, from the foot bed to the sole, where the platform is wrapped with material to hide the platform, making it appear as part of the shoe.
JD3
Leg Opening
Measurement of the diameter of the leg opening at the bottom of the pant leg.
JD4
Running Length
Measurement of the longest measurement for the item which comes in contact with a surface (snow, ground, etc.) during normal use.
JD5
Torso Length
Measurement from the neck line to the bottom hem.
JD6
Waist Width
Measurement of the width at the narrowest part of the item.
JD7
Collar Size
Measurement of inside of the neck hole, with the collar fully buttoned.
JOM
Jominy Hardenability
The product's hardness and depth of hardening
JUC
Juice Content
KA
Knoop
KB
Krypton
KN
K&N Holdout
KPS
King Pin Setting
The longitudinal distance between the forward edge of the equipment and the king pin
KVL
Strength Coefficient
L
Legal Weight
L0
Leaf Grade
L1
Lights
A relative term that is used to identify the weight percent of all molecules below the peak identified as the molecule being tested for in a gas chromatograph result; also, all molecules that have a boiling point lower than the molecule being tested
L2
Nucleotides
L3
Polydextrose
L4
Sucralose
L5
Taurine
LA
Lanthanum
LAI
Langlier Index
LAS
Lot Acceptability for Shape
LB
Lithium
LC
Low Propagation Delay Time
The time between the specified reference points on the input and output waveforms, with the output changing from high level to the defined low level
LC5
Lethal Concentration, 50% ("LC-50")
The lowest value of concentration which will result in the death of exactly one half of a given biological test population
LCG
Longitudinal Center of Gravity
LD
Lawrencium
LD5
Lethal Dose, 50% ("LD-50")
The lowest value of dose which will result in the death of exactly one half of a given biological test population
LDH
Limited Dome Height (LDH)
Response to simulated drawing operation
LE
Lutetium
LEA
Leakers
LEF
Leaf
Percentage of leaf in fiber as determined by trash count and trash area
LF
Long Fibers
LG
Leg
LIP
Lipids
LIR
Liquid Injection Test Rate
Volume of liquids, such as oil, mud, and water, which are injected into the well during a 24-hour test period
LIS
Listeria
LIV
Limit Intrinsic Viscosity
The percent of cellulose in a crystalline rather than amorphous form
LL
Long Leg
LLD
Light Load
LM
Length, Maximum
LN
Length
LO
Long Length
LOI
Loss on Ignition
Loss (of material) that occurs when a sample is ignited
LOS
Loss on Drying
The amount of material lost after heating to a constant weight at a specified temperature
LOW
Low Boilers
The components of a mixture which boil at a lower temperature than the rest of the mixture
LP
Camber of Pattern Line
LPG
Liquefied Petroleum Gas Factor
LPL
Labeled Product Life
LPR
Line Pressure
Fluid pressure of the production line between the well and the separator unit or gathering line
LRC
Lovibond Red Color
LS
Short Leg
LSA
Lock Seam Adhesion
Visual observation rating zinc adherence after a lockforming operation
LSK
Length Shrinkage
The amount of shrinkage occurring per linear yard of fabric expressed in percentage
LSS
Linear Sheet Swelling
The increased size of a sheet of pulp when immersed in caustic during pulping
LT
Lengthwise Spacing
LTD
Liner Top Depth
Depth below the surface of the top of a liner string; liner is a tube within the casing used to separate different strata but does not extend to the surface
LW
Long Width
M
Minimum Weight (for Weight)
M1
Melt Range
A range of temperatures used to identify at what point compounds start to transform from a solid to a liquid state
M2
Maximum Differential Pressure
The largest differential pressure reading at which this device will measure the differential pressure accurately
M3
Maximum Static Pressure
Largest flowing gas pressure at which this device will measure volumes accurately
M4
Area
M5
Minimum Speed
M6
Maximum Speed
M7
Linoleic Acid
M8
Linolenic Acid
M9
Aspartame
MA
Mean Average
MAT
Maturity
Swelling and compression of fiber
MB
Mendelevium
MC
Min./Max Cuttable Width
MCN
Magnetic Contamination
MD
Measurement Voltage
The reference voltage level on AC waveforms for determining AC performance
MDL
Method Detection Limit; Minimum concentration of a substance that can be measured and reported with 99% confidence that analyte concentration is greater than zero
MDP
Mettler Dropping Point
ME
Maximum Input Low Voltage
The guaranteed input low threshold
MEA
Media Depth
Depth to surface of medium (water, sediment, soil) being sampled
MEF
Meter Factor
MEL
Melt Time
The time between the first appearance of liquid and the total disappearance of solid
MEP
Meat Protein
MER
Efficient Rate-Reservoir
The maximum daily oil or gas withdrawal rate from a hydrocarbon reservoir
MF
Minimum Input High Voltage
The guaranteed input high voltage
MG
Mercury
MGL
Monoglyceride
MH
Melting Point
MHI
Highest Torque
Highest torque attained during specified period of time when no plateau or maximum torque is obtained
MI
Minimum
MIC
Micronaire
Fiber fineness; the higher the value, the courser the fiber
MII
Mineral Impurities
MIL
Milk Fat
MIP
Miscolored Pieces
MIS
Milk Solids
MJ
Major Section (Stepped)
MK
Microseperometer (MSEP)
MLT
Minimum Lifespan From Time of Arrival
The period of days, guaranteed by the manufacturer, before the expiration date of the trade item, based on arrival to a mutually agreed to point in the buyers distribution system.
MM
Management
MN
Minimum Average
MNL
Monolein
MO
Mottles
MOI
Moisture
The amount of water in an item
MON
Monetary
MOR
Mortality
MP
Mullen Pop
MPL
Monopalmitin
MPO
Moisture Protein Ratio
MPR
Production Rate-Well
The maximum daily rate of at which oil or gas may be produced from a hydrocarbon well
MPT
Many Press Test
Visual inspection for coating defects using a miniature stamping press
MQ
MCQuaid
Austenitic grain morphology of a sample
MR
Module R (R Bar)
Ratio of true width strain to true thickness strain; indicates the ability of the material to resist thinning and deform in draw
MS
Minor Section (Stepped)
MSA
Monounsaturated
MSD
Must Sell By Days
Used to designate the number of days open dated product must 'sell by' from date of manufacture.
MST
Monostearin
MT
Moisture Content
MTD
Maximum Total Depth
Total distance along the well bore to the final bottom hole location
MTI
Farinograph Mixing Tolerance Index
MU
Multiplier
MUL
Mullen
The energy required to burst a sheet with one of several standard pluggers
MV
Maximum Average
MW
Molecular Weight
MX
Maximum
MY
Magnetizing Field
N
Actual Net Weight
N1
Acesulfame-potassium
N2
Arachidonic Acid (ARA)
N3
Choline
N4
Docosahexanoic Acid (DHA)
N5
Galactooligosaccharides (GOS)
N6
Inositol
N7
L-Carnitine
N8
L-Methionine
N9
Lutein
NA
Number per Package
NB
Number per Bundle
NBR
Number of Batteries Required
NC
Number per Coil Group
ND
Neodymium
NE
Niacin Equivalent (NE)
Niacin Equivalents (NE) units are used to express niacin content of food. It represents preformed niacin plus tryptophan equivalents (60 mg tryptophan = 1 mg niacin)
NEC
Net Content
Net Content is the statement on the label which provides the amount of product in the container or package. Example bottle of water contains 500 ML of water.
NEE
Non-volatile Ether Extract
NEF
Nesting Increments
Indicates the incremental height when 2 trade items are nested together.
Example one garbage can in another, height increment 1/2 inch.
NES
Neutralizing Strength
NEU
Neutralization Number
The quantity of acid or base required to neutralize basic or acidic constituents in a substance
NF
Neon
NG
Nobelium
NH
Number of Items per Package Label
NI
Number of Splices per Package Label
NIL
Nil Ductility Test
The condition required to initiate brittle fracture
NIT
Nitrite
NJ
Number of Sheets per Package Label
NK
Nesting Factor
NL
Number per Lift
NM
Number Pkgs. per Master Pack
NNW
Net Net Weight
The weight of an item exclusive of the weight of any shipping packaging and of any additional packaging or attachments such as cellophane wrapping or hangers
NO
Nominal (Target, Aim)
NOB
Norbixin
NOC
Number of Cosigners
NON
Non-Volatile Matter
The amount of residue remaining after an analytical process
NOR
Number of References
NOS
Suggested Number of Servings
NOX
NOx Emissions Performance
Difference in exhaust NOx emissions attributed to a gasoline formulation as compared to the 1990 baseline gasoline
NP
Percent of Specified
NS
Number per Skid
NTS
Natural Tomato Soluables
NU
Number per Unit
NV
N Value
The work hardening rate capability of material and predicts the ability to deform in stretch, plane strain, and bending
NVO
Non-volatile Oil
NZ
Nutritional Facts Calculation Size
O
Excess Weight Over Maximum
O1
Orifice - Inside Diameter
OA
Offset
OAP
Observed American Petroleum Institute Gravity
OB
Osmium
OBT
Observed Temperature
OC
Output Low Voltage
The maximum guaranteed low voltage at an output terminal sinking the specified load-current output low current
OCG
Oil/Condensate Gravity
Production fluid density relative to the density of water
OCH
Other Carbohydrates
OCO
Oil Coating
OCR
Oil/Condensate Test Rate
Volume of oil and natural gas condensate produced during a 24-hour test period
OCT
Optimum Consumption Temperature
Recommended temperature for product consumption
OD
Outside Diameter
ODR
Odor
The quality of a substance that stimulates the olfactory organ
OE
Output Low Current
The current flowing into an output which is in the low state
OF
Output High Voltage
The minimum guaranteed high voltage at an output terminal for the specified output current 'output high current' and at the minimum VCC value
OG
Output High Current
The leakage current flowing into a turned-off, open-collector output with a specified high output voltage applied
OH
Overhead Height, Receiving Door
OI
Output Off Current Low
The current flowing out of a disabled three-state output with a specified low output voltage applied
OIL
Oil
Liquid, slippery, viscous, relatively nonvolatile chemical
OJ
Output Off Current High
The current flowing into a disabled three-state output with a specified high output voltage applied
OK
Output Short-Circuit Current
The current flowing out of an output which is in the high state when that output is short circuit to ground
OL
Output Disable Time from Low Level of a 3-State Output
The delay time between the specified reference points on the input and output voltage waveforms with the three-state output changing from the low level to a high impedance 'off' state
OLA
Oleic Acid
OLE
Olefins
Hydrocarbons containing double bonds
OM
Outside Diameter, Maximum
ON
Output Disable Time from High Level of a 3-State Output
The delay time between the specified reference points on the input and output voltage waveforms with three-state output changing from the high level to a high impedance 'off' state
OO
Output Enable Time from Low Level of a 3-State Output
The delay time between the specified reference points on the input and output voltage waveforms with the three-state output changing from the high impedance 'off' state to the low level
OP
Openness
OQ
Output Enable Time from High Level of a 3-State Output
The delay time between the specified reference points on the input and output voltage waveforms with the three-state output changing from high impedance 'off' state to the high level
OR
Distance Between Outside Runners
ORC
Organic Carbon
The amount of carbon which is bonded to another carbon or hydrogen or both
OS
Open Circuits
OT
Output Delay Time
OTE
Others Each
Identifies the maximum value of any single metallic element not listed in the chemical composition limits standard
OTH
Odor Threshold
OTT
Others Total
Identifies the total value of all metallic elements not listed in the chemical composition limits standard
OUM
Ordering Unit
OV
Opacity
OW
Overall Width
OX
Ownership Share
OXI
Oxidizable Substance
Represents the amount of a substance that can undergo oxidation
OXS
Oxidizing Substance
A substance which removes electrons from other substances
OXY
Oxyethylene
OY
Operating Weight
P1
Price
P2
Percent Daily Value (DV) / Recommended Daily Intake (RDI)
PA
Package Separation
PAA
Active Ingredient in Product
PAB
Drug Strength
PAC
Drug Concentration
PAL
Pattern Length
The length of a pattern that repeats on a product
PAR
Particle Size
The diameter of solid and liquid particles
PAT
Patulin
PAW
Pattern Width
The width of a pattern that repeats on a product
PB
Pressure
PBD
Plug Back Total Depth
Well depth after plug back operations to abandon a lower producing horizon or formation
PBR
Pure Base Ratio
The amount of chemical in its base form is over the total amount of the chemical. This is the quantitative relation that describes the amount of the base molecule within its salt (i.e. the amount of pure testosterone within testosterone propionate).
PC
Per Hundred Linear Yards
PCB
Total quantity of PolyChlorinated Biphenyl contained in the shipment
PCC
Post Consumer Content
The material discarded by consumers after a product is consumed.
PCO
Piece Count
PD
Platinum
PDE
Casing/Liner Tubing Depth
Depth to the bottom of the casing/liner string
PDG
Pump Depth from Ground
The distance from the ground surface to the subsurface pump unit
PDH
Pattern Drop Horizontal
The measurement of horizontal distance between repeats of a pattern
PDI
Protein Dispersibility Index
PDV
Pattern Drop Vertical
The measurement of vertical distance between repeats of a pattern
PDX
Polydextrose
PE
Potassium
PEC
Potassium Chloride
PEF
Performance
PEO
Peroxidase
PER
Magnetic Permeability
The ease with which a material can be magnetized and how much better it is as a path for magnetic fields than air
PES
Potassium Sorbate
PEV
Peak Viscosity
PEX
Perioxide Value
PF
Promethium
PFO
Perforation Feet Open
Linear distance of all perforations of the well casing string
PG
Polonium
PGL
Polyethylene Glycol
PGM
Propylene Glycol Monoesters
PH
Pulse Setup Time
The interval immediately preceding the active transition of the timing or preceding the transition of the control input to its latching level
PHA
pH
PHE
Phenol
PHW
Hardwood Fiber
The amount of threadlike, primarily cellulosic material derived from the wood portion of hardwood trees
PI
Pulse Hold Time
The interval immediately following the active transition of the timing pulse or following the transition of control input to its latching level
PIC
Pick Off
PIP
Piperine
PJ
Pulse Width
The time between the specified reference points on the leading and trailing edges of a pulse
PK
Pulse Recovery Time
The time between the reference point on the trailing edge of an asynchronous input control pulse and the reference point on the activating edge of a synchronous pulse input such that the device will respond to the synchronous input
PL
Percent Defective
PLM
Preliminary Volume
PM
Practice
PN
Palladium
PO
Percent of Order (-, +)
Expression of allowable variance of order expressed either as absolute (for example 92% to 110%) or relative percent (for example - 8% to + 10%)
POC
Completion
POD
Physical Description - Outer Diameter
POL
Polariation
POP
Pour Point
The lowest temperature at which an oil is observed to flow when cooled
POR
Propylene Oxide Residue
PP
Powder/Paste Package Size
PPS
Proprietary Shade
Identifies to customers when a textile company is using the customer's proprietary shade code versus the standard industry shade code
PQ
Plutonium
PQL
Practical Quantitation Limit; Lowest concentration of a substance which can be consistently determined within +/- 20% of the true concentration by 75% of the laboratories tested in a performance evaluation study
PR
Praseodymium
PRA
Proportion Alive
PRE
Prior Experience
PRF
Pressure Factor
PRG
Propylene Glycol
PRI
Product Index
PRL
Product Level
PRN
Proportion Normal
PRO
Processability
A rating of the ability to process
PRQ
Product Reportable Quantity
PRY
Porosity
PRZ
Proportion Fertilized
PS
Protactinium
PSA
Percent Solution Actual
PSP
Past Performance
PSR
Pesticide Residuals
PSW
Softwood Fiber
The amount of threadlike, primarily cellulosic material derived from the wood of softwood trees
PT
Pits
PU
Pressure Base
PUN
Pungency
PV
Picks
PW
Purchased Width
PWA
Processed Waste
PWE
Physical Description - Weight
PWF
Power Factor
PX
Purity
PY
Percent of Water
PZ
Pipe Size Nominal
Q
Volatile Organic Compounds Plus Water
QA
Quality Index
QB
Quantity or Loading Average
QC
Quantity or Loading Maximum
QD
Quality or Concentration Average
QE
Quality or Concentration Minimum
QF
Quality or Concentration Maximum
QG
Duration
QI
Abundance
QJ
Biomass
QK
Size Class
Classification of a Continuum Into Discrete Units
QL
Quality
QUR
Reportable Quantity
QUS
Quick Sog
R
Per Unit Dunnage
R1
Hemoglobin
R2
Hematocrit
R3
Epoetin Starting Dosage
R4
Creatinine
R7
Speed
R8
Speed Limit
R9
Retinol
R10
Relative Fraction of Pure Long-Chain Cellulose
The ratio by weight of pure long-chain and degraded cellulose to pulp where cellulose molecules of various chain lengths occur
R18
Relative Fraction of Total Cellulose
The ratio by weight of total cellulose to pulp
RA
Relative Humidity
RAD
Radius
RAF
Roof Adjustment Factor
RAL
Residual Alcohol
RB
Range Value
RC
Radius of Corner
RCC
Recycled Content
The material that is made from recycled content.
RD
Readpoint
RDS
Reducing Sugars
RE
Ream Weight
REA
Reactivity
The rate at which a substance reacts or the amount of substance that reacts
RED
Reducing Substance
A substance which donates electrons to other substances
REF
Refining
The severity of mechanical processing stage expressed by the amount of energy applied and length of time product is retained within equipment
REH
Rehydration
REI
Refractive Index
The ratio of the velocity of light in a vacuum to the velocity of light in the liquid
REL
Reflectance
The fraction of the total radiant flux incident upon a surface that is reflected and that varies according to the wavelength distribution of the incident variation
REO
Residual Ethylene Oxide
RES
Resistance
The property of a conductor causing electric energy to be transformed into heat; equal to the voltage across the conductor divided by the electrical current flowing in the conductor; measured in ohms
RF
Resistivity
RG
Radium
RH
Rhenium
RI
Rubidium
RJ
Rockwell-C
RK
Rockwell-B
RL
Reduction Ration
RM
RMS Range (Side 1)
RN
Required Interrupt Release
RNU
Recommended Number of Uses
RO
Reset Pulse Width
ROH
Rear Over-Hang of Vehicle
ROI
Residue on Ignition
ROX
Oxygen from a Renewable Oxygenate
RP
Reduction of Area
RQ
Radon
RR
Reduction Ratio
RS
RMS Range (Side 2)
RSZ
Roll Size
RT
Rounds Ammunition/Military
RTB
Reporting Temperature Base
RU
Rhodium
RUD
Usage Deviation (Applies to Kilowatt Hours, Kilowatt Demand and Reactive Demand)
RV
Ruthenium
RVP
Reid Vapor Pressure
RW
Rolling Width
RX
Ridges
RY
Ratio
S
State Weight
S1
Smoothness
S2
Selvedge on Beam
S3
Sheffield Smoothness
S4
Surface Strength
S5
Stiffness
S6
Saturation
S7
Sediment
S8
Solubility
S9
Site Atmospheric Pressure
Ambient pressure of the metering location
S10
Pulp Impurities
The percent hemicellulose polysaccharides and degraded cellulose in pulp fibers
S11
Salt
S12
Start
Identifies a value measured at the start of a testing process or range of test results
S18
Hemicellulose
The percent hemicellulose polysaccharides in pulp fibers
SA
Sort Code CIE LAB
SAB
Sodium Acid Pyrophosphate (SAPP) by Boyd Method
SAC
Sodium Ascorbate
SAH
Sodium Acid Pyrophosphate (SAPP) by Humidified Boyd Method
SAK
Sodium Acid Pyrophosphate (SAPP) by Chittick Method
SAL
Salinity; Salt level in a sample of seawater
SAP
Saponification Number
The number of milligrams of potassium hydroxide that is consumed by 1 gram of sample
SAS
Saturated Fatty Acid as Stearic
SB
Sort Code CMC
SBE
Sodium Benzoate
SBI
Sodium Bicarbonate
SBR
Sodium Bicarbonate Release
SBU
Sodium Bisulfite
SC
Schedule Number (Pipe Size)
SCH
Schedule
SD
Strength
SDC
Color Strength
SDV
Surface Starch
SE
Selvage Left
SER
Number of Servings
SEV
Severity
SF
Samarium
SFA
Solid Fat Index at 104 F
SFB
Solid Fat Index at 50 F
SFC
Short Fiber Content
SFD
Solid Fat Index at 80 F
SFE
Sodium Ferrocyanate
SFG
Solid Fat Index at 92 F
SFJ
Solid Fat Index at 70 F
SFO
Solid Fat Content
SG
Slit Width
Width into which a customer wants a material slit (cut) length wise
SGW
Stacking Weight
The maximum admissible weight that can be stacked on the trade item
SH
Strontium
SHA
Shelf Life
SHE
Shell
SHU
Scoville Heat Units
SHW
Shipping Weight per Pricing Unit
SI
Supply Current
The current flowing into the VCC supply terminal of the circuit with specified input conditions and open outputs
SIL
Silica (Silicon Dioxide)
SIZ
Size
SJ
Short Circuits
SK
Shrinkage
SKF
Stacking Factor
Identifies the number of levels the product may be stacked.
SL
Short Length
SLD
Solderability
A measure of the ability of a material or component to be soldered
SLI
Slagging Index
The result of a procedure for obtaining information regarding the accumulation of ash deposits on radiant heat exchange surfaces in the furnace
SLL
Salmonella
SLU
Selling Unit
SM
Shear
SMB
SAM-B Rating
Measures cleanliness of steel for critical parts as to B-oxide volume in the steel
SMD
SAM-D Rating
Measures cleanliness of steel for critical parts as to D-oxide volume in the steel
SN
Stain
SO
Sort Code CIE LCH
SOA
Soda
SOC
Sodium Acid Pyrophosphate
SOD
Solids
The non-volatile material remaining after an analytical process
SOF
Softening Range
The temperature range in which material without a melting point goes from a rigid to a soft condition
SP
Splinter Count
SPA
Saturated Fatty Acid as Palmitic
SPG
Specific Gravity
SPH
Sphere
SPR
Separator Pressure
Operating pressure of the oil/water/gas separating unit
SPS
Static Pressure
SQ
Shipped Quantity
SQT
Serving Quantity
Number of servings and units contained in the package.
SR
Selvage Right
SRO
Specific Rotation
SS
Silver
SSA
Sodium Silico Aluminate
SSJ
Serving Size
SSK
Serving Size Weight
SSS
Suggested Serving Size
ST
Stop Recovery Startup Time
STA
Stability
The property of a chemical compound which is not readily decomposed and does not react with other compounds
STF
Calories from Saturated and Trans Fats
STL
Short Term Exposure Limit
STO
Storage Handling Temperature
STP
Staple
Conventional method of measuring fiber length as pulled by hand
SU
Shipped Units
SUC
Sucrose
SUL
Sulfite
SUM
Suspended Matter
The mixture of fine, non-settling particles of a solid within a liquid or gas
SUP
Suspended Pulp
SUR
Surface Roughness
SUS
Suspended Solids
SUT
Surface Tension
The force acting on the surface of a liquid which tends to minimize the area of the surface
SV
Scandium
SVL
Survival
SW
Short Width
SX
Sodium
SXS
Sodium Sulfate
SXX
S10 Minus S18 Value
The percent degraded cellulose in pulp fibers
SY
Service Interrupt Duration
SZ
Skid Height
T
Tare Weight
T1
Tire Pressure
T2
Tube - Inside Diameter
T3
Technical
T4
Single End Break
Break point of a single strand of yarn expressed in grams
T5
Skein Break
Break strength of yarn in skein form
T50
T50
Temperature at which 50% of the volume of a mixture being distilled has been evaporated
T90
T90
Temperature at which 90% of the volume of a mixture being distilled has been evaporated
TA
Thickness Heavy End (Tapered/Stepped)
TAC
Tartaric Acid
TAS
Taste
The chemical sense by which flavors are perceived depending on taste, tactile, and warm and cold receptors in the mouth, as well as smell receptors in the nose
TB
Thickness Small End (Tapered/Stepped)
TC
Temperature
TCL
Tire Tread Contact Length
TCR
Temperature Control Range
TD
Thin Aluminas
TDD
Total Sugar (Dry)
TDP
Perforation Top Depth
The depth from the ground surface to the top, or shallowest, portion of the well casing perforations
TE
Tenacity
TEE
Autodecomposition Temperature
TES
Storage Temperature
TET
Transportation Temperature
Specifies the temperature requirement of the product when being moved from one place to another and under the control of the carrier.
TEW
Test Weight
TEX
Texture
The property of a solid substance which is dependent on the size, form, order, and grouping of the smaller parts of which it is made and the way in which these parts are united
TF
Tensile
TG
Thin Sulfides
TH
Thickness
TI
Thin Silicates
TIA
Titratable Acidity
TIC
Total Items
The items synchronization calculation is based on the total number of items in the customer's catalogue.
TJ
Total Supply Current
TK
Timer Pulse Width
TL
Tapered/Stepped Length Type
TM
Length Type: Multiples
TN
Timer Period
TO
Terbium
TOA
Aquatic Toxicity
TOR
Torque
A force that produces rotation or torsion
TOT
Total Aldehyde Content
TOX
Toxic Emissions Performance
Difference in exhaust toxic emissions attributed to a gasoline formulation as compared to the 1990 baseline gasoline
TP
Thorium
TPE
Farinograph Time to Peak
TPF
Temperature Factor
TPL
Tubing Pressure - Flowing
Fluid pressure within the inner tubing used to isolate different production streams from the surrounding well while production is flowing from the well; measured during well testing and completion operations
TPQ
Threshold Planning Quantity
TPS
Tubing Pressure - Shutin
Fluid pressure within the casing, the outermost tubing used to isolate the well from the surrounding geology, with the well annulus closed; measured during well testing and completion operations
TQ
Thin Globular Oxides
TR
Length Type: Random
TRA
Trash Area
The number of pixels dotted by trash
TRC
Trash Count
Amount of trash in the court fiber
TRD
Tire Diameter
TRN
Transmittance
The fraction of the emitted light of a given wavelength which is not reflected or absorbed but passes through a substance
TRP
Tricalcium Phosphate
TRS
Transmissivity; Measure of the quantity of light that passes through a given volume of seawater; also used to measure turbidity and to estimate plant growing zones in the ocean
TRT
Transmissivity Pathlength; The length of the path taken to arrive at transmissivity measurements
TS
Length Type: Specific
TSO
Total Solids
TSZ
Trim Size
TT
Time
TTC
Total Carbohydrates
Denotes Total Carbohydrates
TTL
Trailer Tongue Length
TTR
Tesla Tolerance Rate
TU
Technetium
TUR
Turbidity
The extent of cloudiness in an item in which colloidally dispersed particles are present
TV
Thallium
TVD
Maximum True Vertical Depth
Total vertical distance from a surface location directly above the bottom hole location
TVO
Total Volatiles
TW
Top
TWD
Tire Width
TX
Thulium
TY
Tear Strength
U
Weight per Unit
UA
Uranium
UCB
Cube
The external cubic dimensions of a specified product
UG
Usage
UNA
Unipunch Adhesion
Visual observation rating zinc adherence after a die punch
UNI
Uniformity
The degree of uniformity of fibers in a sample
UNK
Unknowns
Substances that are quantitated but of unknown identity
UPW
Units per Weight
V
Oxygenation Level
VA
Vitamin A
Vitamin A in the product based on the nutritional serving size provided
VAD
Vapor Density
VAL
Vanillin
VAN
Vanilla
VAP
Vapor Pressure
VBA
V-Bend Adhesion
Visual observation rating zinc adherence after peeling tape from a bent coupon
VCG
Vertical Center of Gravity
VH
Height, Van Door
VIA
Vitamin A Palimate
VIN
Vinyl
A chemical having the vinyl group CH2=CH-
VIS
Viscosity
VO
Voltage
VOA
Volatile Oil Ash
VOC
VOC Emissions Performance
Difference in exhaust VOC (Volatile Organic Compounds) emissions attributed to a gasoline formulation as compared to the 1990 baseline gasoline
VOI
Volatile Oil
VOL
Volume
VOM
Vomitoxin
VOT
Volatiles
The gas or vapor material given off by an item under defined conditions
VOV
Volatiles by Volume
VOW
Volatiles by Weight
VRE
Vitamin A Retinol Equivalent (RE)
The vitamin A content of a food as measured in "micrograms of retinol equivalents," or "micrograms RE"
VSO
Volume Split to Others
VW
Width, Van Door
VWT
Volume Weight
W
Reformulated Fuel Level
WA
Weight per Unit of Area
WAB
Water Absorption
WAC
Water Activity
WB
Web
WC
Web Depth/Height
WD
Width
WDE
Water Depth
The depth of the water at an offshore location; measured from sea or lake bottom to the mean tidal level
WDR
Weight Density Ratio
The ratio of the weight of a body to its volume
WE
Wolfram
WEL
Weight Loss
The amount of substance by weight that a material loses when subjected to specified conditions
WF
Wait Recovery Startup Time
WH
Whiteness
WHT
Whip Test
WI
Winding Loss
WIN
Water Insolubles
WL
Wall Thickness
WM
Width, Maximum
WML
Weight of Moisture Loss
WMP
Wiley Melting Point
WOD
Water-Oil Distribution Coefficient
A measure of the miscibility of oil and water
WPF
Wellhead Pressure-Flowing
The pressure as measured at the wellhead of a hydrocarbon well during a flow test
WPL
Water/Product Level
WPN
Whey Protein Nitrogen
WPP
Weight Per Piece
WPS
Wellhead Pressure Shutin
The pressure as measured at the wellhead of a hydrocarbon well during a shutin condition
WR
Wrinkles
WRA
Water Test Rate
The volume of water produced during a 24-hour test period
WSK
Width Shrinkage
The amount of shrinkage occurring per yard in the width of fabric expressed in percentage
WSO
Water Solubles
WT
Weight
WTB
Water/Tank Bottom Level
WU
Weight per Unit of Length
WX
Wax Pick
X
Maximum Weight (for Rate)
XA
Xenon
XH
Side Height, Flat Bed With Removable Sides
XP
Specified
XQ
Squareness
XZ
Spool Size
YA
Yttrium
YB
Yield
YC
Ytterbium
YD
Yarn Count
The length per unit mass of yarn
YPE
Yield Point Elongation
The amount of extension which occurs between the upper yield point and the point at which the load begins to rise steadily again
ZAL
Aluminum
ZAS
Arsenic
ZB
Boron
ZBI
Bismuth
ZBT
N-Butane
Relative concentration of N-Butane in the gas stream being measured
ZBZ
Benzene
ZC
Carbon
ZCA
Calcium
ZCB
Columbium
ZCC
Calcium Chloride
ZCD
Carbon Dioxide
Relative concentration of carbon dioxide in the gas stream being measured
ZCE
Cerium
ZCM
Carbon Monoxide
ZCO
Cobalt
ZCR
Chromium
ZCS
Calcium Sulfate
ZCU
Copper
ZD
Load Factor
Relationship between watt hours and watt demand necessary to supply electric load
ZDA
Titanium Dioxide Assay
ZET
Ethane
Relative concentration of ethane in the gas stream being measured
ZF
Sulfate Sulfur
An oxidation product present in sulfur
ZFE
Iron
ZFL
Newspaper--Full Page
ZFS
Iron plus Silicon
ZG
Organic Sulfur
The total sulfur less the percentage sums of sulfate sulfur and pyritic sulfur
ZGE
Germanium
ZH
Hydrogen
ZHP
Heptane
Relative concentration of heptane in the gas stream being measured
ZHS
Hydrogen Sulfide
Relative concentration of hydrogen sulfide in the gas stream being measured
ZHX
Hexane
Relative concentration of hexane in the gas stream being measured
ZIB
I-Butane
Relative concentration of I-Butane in the gas stream being measured
ZIP
I-Pentane
Relative concentration of I-Pentane in the gas stream being measured
ZMG
Magnesium
ZMN
Manganese
ZMO
Molybdenum
ZMT
Methane
Relative concentration of methane in the gas stream being measured
ZN
Nitrogen
ZNB
Niobium
ZNI
Nickel
ZNP
Neo-Pentane
Relative concentration of neo-pentane in the gas stream being measured
ZO
Oxygen
ZOC
Octane
Relative concentration of octane in the gas stream being measured
ZP
Phosphorous
ZPB
Lead
ZPP
Propane
Relative concentration of propane in the gas stream being measured
ZPT
N-Pentane
Relative concentration of N-Pentane in the gas stream being measured