ATR Animal Test Result

To report individual animal test results

Position: ATR-01 · Element: 1607 · Name: Test Type Code · Type: Identifier (ID) · Requirement: Mandatory · Min: 2 · Max: 2 · Repeat: -

Code identifying the type of test performed for which measured results will be reported

Position: ATR-02 · Element: 1313 · Name: Test Period or Interval Value · Type: Numeric (N0) · Requirement: Mandatory · Min: 1 · Max: 6 · Repeat: -

Numeric value of period or interval signifying when a test event occurs

ATR02 identifies the dose day or interval on test this result was recorded.

Position: ATR-03 · Element: 344 · Name: Unit of Time Period or Interval · Type: Identifier (ID) · Requirement: Mandatory · Min: 2 · Max: 2 · Repeat: -

Code indicating the time period or interval

Position: ATR-04 · Element: 739 · Name: Measurement Value · Type: Decimal number (R) · Requirement: Conditional · Min: 1 · Max: 20 · Repeat: -

The value of the measurement

R0406: At least one of ATR-04 or ATR-06 is required

P0405: If either ATR-04 or ATR-05 is present, then the other is required

ATR04 used to report numeric test results.

ATR-05 C001 Composite Unit of Measure Composite (composite) Conditional

Position: 01 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Mandatory · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 02 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-02 is not used, its value is to be interpreted as 1.

Position: 03 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-03 is not used, its value is to be interpreted as 1.

Position: 04 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 05 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-05 is not used, its value is to be interpreted as 1.

Position: 06 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-06 is not used, its value is to be interpreted as 1.

Position: 07 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 08 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-08 is not used, its value is to be interpreted as 1.

Position: 09 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-09 is not used, its value is to be interpreted as 1.

Position: 10 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 11 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-11 is not used, its value is to be interpreted as 1.

Position: 12 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-12 is not used, its value is to be interpreted as 1.

Position: 13 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 14 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-14 is not used, its value is to be interpreted as 1.

Position: 15 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-15 is not used, its value is to be interpreted as 1.

Position: ATR-06 · Element: 1608 · Name: Non-Numeric Test Value · Type: String (AN) · Requirement: Conditional · Min: 1 · Max: 30 · Repeat: -

Identifies a non-numeric value for a test result

ATR06 reports non-numeric test results.

Position: ATR-07 · Element: 352 · Name: Description · Type: String (AN) · Requirement: Optional · Min: 1 · Max: 80 · Repeat: -

A free-form description to clarify the related data elements and their content

ATR07 clarifies ATR01 by identifying the name of a specific test performed for which the results are being reported.

Position: ATR-08 · Element: 1073 · Name: Yes/No Condition or Response Code · Type: Identifier (ID) · Requirement: Optional · Min: 1 · Max: 1 · Repeat: -

Code indicating a Yes or No condition or response

ATR08 indicates whether this data was used in analysis. A "Y" indicates data was used in analysis; an "N" indicates it was not used.

Position: ATR-09 · Element: 752 · Name: Surface/Layer/Position Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code indicating the product surface, layer or position that is being described

ATR09 designates relative position or symmetry of the organ or observation being reported.

Position: ATR-10 · Element: 337 · Name: Time · Type: Time (TM) · Requirement: Optional · Min: 4 · Max: 8 · Repeat: -

Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)

ATR10 identifies the time of day this result was measured.

ATR10 need be present only when more than one result is recorded for the same test type on the same day.