USD Usage-Sensitive Detail

To specify usage-sensitive details which qualify for discounts or are subject to special rates

Position: USD-01 · Element: 662 · Name: Relationship Code · Type: Identifier (ID) · Requirement: Mandatory · Min: 1 · Max: 1 · Repeat: -

Code indicating the relationship between entities

USD01 is a code indicating the relationship of the price or amount to the associated segment.

Position: USD-02 · Element: 350 · Name: Assigned Identification · Type: String (AN) · Requirement: Optional · Min: 1 · Max: 20 · Repeat: -

Alphanumeric characters assigned for differentiation within a transaction set

E0304: Only one of USD-03 or USD-04 may be present

Position: USD-03 · Element: 118 · Name: Rate · Type: Decimal number (R) · Requirement: Conditional · Min: 1 · Max: 9 · Repeat: -

Rate expressed in the standard monetary denomination for the currency specified

L03060708: If USD-03 is present, then at least one of USD-06, USD-07 or USD-08 is required

USD03 is the allowance or charge rate per unit.

If both USD03 and USD08 are present, then USD08 takes precedence.

Position: USD-04 · Element: 954 · Name: Percent · Type: Decimal number (R) · Requirement: Conditional · Min: 1 · Max: 10 · Repeat: -

Percentage expressed as a decimal

L040809: If USD-04 is present, then at least one of USD-08 or USD-09 is required

USD04 is the discount percentage.

USD-05 C001 Composite Unit of Measure Composite (composite) Conditional

Position: 01 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Mandatory · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 02 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-02 is not used, its value is to be interpreted as 1.

Position: 03 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-03 is not used, its value is to be interpreted as 1.

Position: 04 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 05 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-05 is not used, its value is to be interpreted as 1.

Position: 06 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-06 is not used, its value is to be interpreted as 1.

Position: 07 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 08 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-08 is not used, its value is to be interpreted as 1.

Position: 09 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-09 is not used, its value is to be interpreted as 1.

Position: 10 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 11 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-11 is not used, its value is to be interpreted as 1.

Position: 12 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-12 is not used, its value is to be interpreted as 1.

Position: 13 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 14 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-14 is not used, its value is to be interpreted as 1.

Position: 15 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-15 is not used, its value is to be interpreted as 1.

Position: USD-06 · Element: 380 · Name: Quantity · Type: Decimal number (R) · Requirement: Conditional · Min: 1 · Max: 15 · Repeat: -

Numeric value of quantity

USD06 is the quantity of usage.

Position: USD-07 · Element: 380 · Name: Quantity · Type: Decimal number (R) · Requirement: Conditional · Min: 1 · Max: 15 · Repeat: -

Numeric value of quantity

C070506: If USD-07 is present, then USD-05 and USD-06 are required

USD07 is a quantity of usage different than the quantity in USD06. When USD07 is present, it is used in conjuction with USD06, and then the rate USD03 is applied.

Position: USD-08 · Element: 782 · Name: Monetary Amount · Type: Decimal number (R) · Requirement: Conditional · Min: 1 · Max: 15 · Repeat: -

Monetary amount

Position: USD-09 · Element: 610 · Name: Amount · Type: N2 · Requirement: Conditional · Min: 1 · Max: 15 · Repeat: -

Monetary amount

USD09 is the total amount of terms discount.

USD-10 C001 Composite Unit of Measure Composite (composite) Conditional

Position: 01 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Mandatory · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 02 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-02 is not used, its value is to be interpreted as 1.

Position: 03 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-03 is not used, its value is to be interpreted as 1.

Position: 04 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 05 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-05 is not used, its value is to be interpreted as 1.

Position: 06 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-06 is not used, its value is to be interpreted as 1.

Position: 07 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 08 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-08 is not used, its value is to be interpreted as 1.

Position: 09 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-09 is not used, its value is to be interpreted as 1.

Position: 10 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 11 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-11 is not used, its value is to be interpreted as 1.

Position: 12 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-12 is not used, its value is to be interpreted as 1.

Position: 13 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 14 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-14 is not used, its value is to be interpreted as 1.

Position: 15 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-15 is not used, its value is to be interpreted as 1.

Position: USD-11 · Element: 740 · Name: Range Minimum · Type: Decimal number (R) · Requirement: Conditional · Min: 1 · Max: 20 · Repeat: -

The value specifying the minimum of the measurement range

C1110: If USD-11 is present, then USD-10 is required

If USD11 is present and USD12 is not present, then the range is open ended.

Position: USD-12 · Element: 741 · Name: Range Maximum · Type: Decimal number (R) · Requirement: Conditional · Min: 1 · Max: 20 · Repeat: -

The value specifying the maximum of the measurement range

C1210: If USD-12 is present, then USD-10 is required

If USD12 is present and USD11 is not present, then the minimum is zero.