LOC Location

To describe the location in space and time of the axis of an item relative to an origin axis euclidian geometry has been assumed with orthogonal axes; the sequence of axes has been chosen in the customary sequence of X, Y, and Z, however, it is possible to just use two-dimensional space rather than three-dimensional space

Position: LOC-01 · Element: 128 · Name: Reference Identification Qualifier · Type: Identifier (ID) · Requirement: Mandatory · Min: 2 · Max: 3 · Repeat: -

Code qualifying the Reference Identification

LOC01 through LOC03 describe the item.

Position: LOC-02 · Element: 127 · Name: Reference Identification · Type: String (AN) · Requirement: Mandatory · Min: 1 · Max: 30 · Repeat: -

Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier

Position: LOC-03 · Element: 352 · Name: Description · Type: String (AN) · Requirement: Optional · Min: 1 · Max: 80 · Repeat: -

A free-form description to clarify the related data elements and their content

Position: LOC-04 · Element: 127 · Name: Reference Identification · Type: String (AN) · Requirement: Optional · Min: 1 · Max: 30 · Repeat: -

Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier

LOC04 is a description of the positional reference point on the item.

Position: LOC-05 · Element: 729 · Name: Category · Type: String (AN) · Requirement: Optional · Min: 1 · Max: 6 · Repeat: -

An alphanumeric identifier to represent the category to which the item belongs

Position: LOC-06 · Element: 128 · Name: Reference Identification Qualifier · Type: Identifier (ID) · Requirement: Conditional · Min: 2 · Max: 3 · Repeat: -

Code qualifying the Reference Identification

P0607: If either LOC-06 or LOC-07 is present, then the other is required

Position: LOC-07 · Element: 127 · Name: Reference Identification · Type: String (AN) · Requirement: Conditional · Min: 1 · Max: 30 · Repeat: -

Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier

Position: LOC-08 · Element: 352 · Name: Description · Type: String (AN) · Requirement: Optional · Min: 1 · Max: 80 · Repeat: -

A free-form description to clarify the related data elements and their content

LOC05 through LOC08 describe the environment in which the item is placed.

Position: LOC-09 · Element: 127 · Name: Reference Identification · Type: String (AN) · Requirement: Optional · Min: 1 · Max: 30 · Repeat: -

Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier

LOC09 is a description of the positional reference point in the environment. This is the origin of the original axes.

Position: LOC-10 · Element: 739 · Name: Measurement Value · Type: Decimal number (R) · Requirement: Conditional · Min: 1 · Max: 20 · Repeat: -

The value of the measurement

LOC10 through LOC15 describe the translation in the three-dimensional space of the axes with respect to the original axes.

LOC10 is the principal X axis of the item.

LOC10 through LOC14 describe the principal XY plane of the item.

LOC-11 C001 Composite Unit of Measure Composite (composite) Optional

Position: 01 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Mandatory · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 02 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-02 is not used, its value is to be interpreted as 1.

Position: 03 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-03 is not used, its value is to be interpreted as 1.

Position: 04 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 05 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-05 is not used, its value is to be interpreted as 1.

Position: 06 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-06 is not used, its value is to be interpreted as 1.

Position: 07 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 08 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-08 is not used, its value is to be interpreted as 1.

Position: 09 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-09 is not used, its value is to be interpreted as 1.

Position: 10 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 11 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-11 is not used, its value is to be interpreted as 1.

Position: 12 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-12 is not used, its value is to be interpreted as 1.

Position: 13 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 14 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-14 is not used, its value is to be interpreted as 1.

Position: 15 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-15 is not used, its value is to be interpreted as 1.

Position: LOC-12 · Element: 739 · Name: Measurement Value · Type: Decimal number (R) · Requirement: Conditional · Min: 1 · Max: 20 · Repeat: -

The value of the measurement

LOC-13 C001 Composite Unit of Measure Composite (composite) Optional

Position: 01 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Mandatory · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 02 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-02 is not used, its value is to be interpreted as 1.

Position: 03 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-03 is not used, its value is to be interpreted as 1.

Position: 04 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 05 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-05 is not used, its value is to be interpreted as 1.

Position: 06 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-06 is not used, its value is to be interpreted as 1.

Position: 07 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 08 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-08 is not used, its value is to be interpreted as 1.

Position: 09 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-09 is not used, its value is to be interpreted as 1.

Position: 10 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 11 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-11 is not used, its value is to be interpreted as 1.

Position: 12 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-12 is not used, its value is to be interpreted as 1.

Position: 13 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 14 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-14 is not used, its value is to be interpreted as 1.

Position: 15 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-15 is not used, its value is to be interpreted as 1.

Position: LOC-14 · Element: 739 · Name: Measurement Value · Type: Decimal number (R) · Requirement: Conditional · Min: 1 · Max: 20 · Repeat: -

The value of the measurement

LOC-15 C001 Composite Unit of Measure Composite (composite) Optional

Position: 01 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Mandatory · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 02 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-02 is not used, its value is to be interpreted as 1.

Position: 03 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-03 is not used, its value is to be interpreted as 1.

Position: 04 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 05 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-05 is not used, its value is to be interpreted as 1.

Position: 06 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-06 is not used, its value is to be interpreted as 1.

Position: 07 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 08 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-08 is not used, its value is to be interpreted as 1.

Position: 09 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-09 is not used, its value is to be interpreted as 1.

Position: 10 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 11 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-11 is not used, its value is to be interpreted as 1.

Position: 12 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-12 is not used, its value is to be interpreted as 1.

Position: 13 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 14 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-14 is not used, its value is to be interpreted as 1.

Position: 15 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-15 is not used, its value is to be interpreted as 1.

Position: LOC-16 · Element: 739 · Name: Measurement Value · Type: Decimal number (R) · Requirement: Conditional · Min: 1 · Max: 20 · Repeat: -

The value of the measurement

LOC16 is measured with respect to the XY plane around the X axis.

LOC-17 C001 Composite Unit of Measure Composite (composite) Optional

Position: 01 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Mandatory · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 02 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-02 is not used, its value is to be interpreted as 1.

Position: 03 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-03 is not used, its value is to be interpreted as 1.

Position: 04 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 05 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-05 is not used, its value is to be interpreted as 1.

Position: 06 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-06 is not used, its value is to be interpreted as 1.

Position: 07 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 08 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-08 is not used, its value is to be interpreted as 1.

Position: 09 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-09 is not used, its value is to be interpreted as 1.

Position: 10 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 11 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-11 is not used, its value is to be interpreted as 1.

Position: 12 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-12 is not used, its value is to be interpreted as 1.

Position: 13 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 14 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-14 is not used, its value is to be interpreted as 1.

Position: 15 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-15 is not used, its value is to be interpreted as 1.

Position: LOC-18 · Element: 739 · Name: Measurement Value · Type: Decimal number (R) · Requirement: Conditional · Min: 1 · Max: 20 · Repeat: -

The value of the measurement

LOC18 is measured with respect to the YZ plane around the Y axis.

LOC-19 C001 Composite Unit of Measure Composite (composite) Optional

Position: 01 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Mandatory · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 02 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-02 is not used, its value is to be interpreted as 1.

Position: 03 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-03 is not used, its value is to be interpreted as 1.

Position: 04 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 05 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-05 is not used, its value is to be interpreted as 1.

Position: 06 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-06 is not used, its value is to be interpreted as 1.

Position: 07 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 08 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-08 is not used, its value is to be interpreted as 1.

Position: 09 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-09 is not used, its value is to be interpreted as 1.

Position: 10 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 11 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-11 is not used, its value is to be interpreted as 1.

Position: 12 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-12 is not used, its value is to be interpreted as 1.

Position: 13 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 14 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-14 is not used, its value is to be interpreted as 1.

Position: 15 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-15 is not used, its value is to be interpreted as 1.

Position: LOC-20 · Element: 739 · Name: Measurement Value · Type: Decimal number (R) · Requirement: Conditional · Min: 1 · Max: 20 · Repeat: -

The value of the measurement

LOC20 is measured with respect to the ZX plane around the Z axis.

LOC-21 C001 Composite Unit of Measure Composite (composite) Optional

Position: 01 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Mandatory · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 02 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-02 is not used, its value is to be interpreted as 1.

Position: 03 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-03 is not used, its value is to be interpreted as 1.

Position: 04 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 05 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-05 is not used, its value is to be interpreted as 1.

Position: 06 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-06 is not used, its value is to be interpreted as 1.

Position: 07 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 08 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-08 is not used, its value is to be interpreted as 1.

Position: 09 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-09 is not used, its value is to be interpreted as 1.

Position: 10 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 11 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-11 is not used, its value is to be interpreted as 1.

Position: 12 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-12 is not used, its value is to be interpreted as 1.

Position: 13 · Element: 355 · Name: Unit or Basis for Measurement Code · Type: Identifier (ID) · Requirement: Optional · Min: 2 · Max: 2 · Repeat: -

Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken

Position: 14 · Element: 1018 · Name: Exponent · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 15 · Repeat: -

Power to which a unit is raised

If C001-14 is not used, its value is to be interpreted as 1.

Position: 15 · Element: 649 · Name: Multiplier · Type: Decimal number (R) · Requirement: Optional · Min: 1 · Max: 10 · Repeat: -

Value to be used as a multiplier to obtain a new value

If C001-15 is not used, its value is to be interpreted as 1.

Position: LOC-22 · Element: 128 · Name: Reference Identification Qualifier · Type: Identifier (ID) · Requirement: Conditional · Min: 2 · Max: 3 · Repeat: -

Code qualifying the Reference Identification

P2223: If either LOC-22 or LOC-23 is present, then the other is required

Position: LOC-23 · Element: 127 · Name: Reference Identification · Type: String (AN) · Requirement: Conditional · Min: 1 · Max: 30 · Repeat: -

Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier

Position: LOC-24 · Element: 352 · Name: Description · Type: String (AN) · Requirement: Optional · Min: 1 · Max: 80 · Repeat: -

A free-form description to clarify the related data elements and their content