![Pep Boys logo](https://public-assets.guides.us.stedi.com/20c2ee6d-c890-4eab-856f-0b179defdd28/account-config/logo.webp?v=1714403137675)
X12 810 Invoice
This Draft Standard for Trial Use contains the format and establishes the data contents of the Invoice Transaction Set (810) for use within the context of an Electronic Data Interchange (EDI) environment. The transaction set can be used to provide for customary and established business and industry practice relative to the billing for goods and services provided.
- ~ Segment
- * Element
- > Component
Interchange Control Header
To start and identify an interchange of zero or more functional groups and interchange-related control segments
Code to identify the type of information in the Authorization Information
- 00
- No Authorization Information Present (No Meaningful Information in I02)
Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
Code to identify the type of information in the Security Information
- 00
- No Security Information Present (No Meaningful Information in I04)
This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the receiver of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
Code to identify the agency responsible for the control standard used by the message that is enclosed by the interchange header and trailer
- U
- U.S. EDI Community of ASC X12, TDCC, and UCS
This version number covers the interchange control segments
- 00401
- Draft Standards for Trial Use Approved for Publication by ASC X12 Procedures Review Board through October 1997
A control number assigned by the interchange sender
Code sent by the sender to request an interchange acknowledgment (TA1)
- 0
- No Acknowledgment Requested
- 1
- Interchange Acknowledgment Requested
Code to indicate whether data enclosed by this interchange envelope is test, production or information
- I
- Information
- P
- Production Data
- T
- Test Data
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
- >
- Component Element Separator
Functional Group Header
To indicate the beginning of a functional group and to provide control information
Code identifying a group of application related transaction sets
- IN
- Invoice Information (810,819)
Code identifying party sending transmission; codes agreed to by trading partners
Code identifying party receiving transmission. Codes agreed to by trading partners
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Assigned number originated and maintained by the sender
Code used in conjunction with Data Element 480 to identify the issuer of the standard
- T
- Transportation Data Coordinating Committee (TDCC)
- X
- Accredited Standards Committee X12
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
- 004010
- Draft Standards Approved for Publication by ASC X12 Procedures Review Board through October 1997
Heading
Transaction Set Header
To indicate the start of a transaction set and to assign a control number
Code uniquely identifying a Transaction Set
- The transaction set identifier (ST01) used by the translation routines of the interchange partners to select the appropriate transaction set definition (e.g., 810 selects the Invoice Transaction Set).
- 810
- Invoice
Beginning Segment for Invoice
To indicate the beginning of an invoice transaction set and transmit identifying numbers and dates
Example: BIG2000042512351199**1999999999
Date expressed as CCYYMMDD
- BIG01 is the invoice issue date.
Detail
Baseline Item Data (Invoice)
To specify the basic and most frequently used line item data for the invoice and related transactions
Example: IT1021EA25.75
Alphanumeric characters assigned for differentiation within a transaction set
- IT101 is the purchase order line item identification.
This element contains the Pep Boys purchase order line number. Returning an invalid line number will result in a failure to process the
message.
Number of units invoiced (supplier units)
This element contains the number of units being invoiced for. The following rules apply to this element:
The quantity contained here cannot be greater than the quantity that has been reported shipped.
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
- EA
- Each
Summary
Total Monetary Value Summary
To specify the total invoice discounts and amounts
Example: TDS*12575
Tax Information
To specify tax information
Example: TXIEV50
Carrier Detail
To specify transportation details for the transaction
If this invoice is also conveying shipment information, this segment must be used if a CAD segment has not been provided at the Detail level.
LTL carrier or special handling can only be reported at the Detail level.
Example: CADZZ1234567CN1TR95786957695
Code specifying the method or type of transportation for the shipment
- ZZ
- Mutually defined
Free-form description of the routing or requested routing for shipment, or the originating carrier's identity
Vendor's code for actual shipping / routing. Use same code list as for PO's.
Code qualifying the Reference Identification
- CN
- Carrier's Reference Number (PRO/Invoice)
Service, Promotion, Allowance, or Charge Information
To request or identify a service, promotion, allowance, or charge; to specify the amount or percentage for the service, promotion, allowance, or charge
Refer to REF02 for complete list of allowance codes for Pep Boys.
This segment should only be used to communicate a credit allowance.
Example: SACAB800***325
Code which indicates an allowance or charge for the service specified
- If SAC01 is "A" or "C", then at least one of SAC05, SAC07, or SAC08 is required.
- A
- Allowance
Code identifying the service, promotion, allowance, or charge
For other available codes please refer to your retailer-specific addendum.
- A020
- Access Charge - Federal
- A260
- Advertising Allowance
- A990
- Cataloging Services
- B330
- Competitive Car Allowance
- B551
- Consulting Service
- B800
- Credit
- C000
- Defective Allowance
- D240
- Freight
- E730
- New Item Allowance
- G980
- Software Support Service
Transaction Totals
To transmit a hash total for a specific element in the transaction set
- Number of line items (CTT01) is the accumulation of the number of IT1 segments.
If used, hash total (CTT02) is the sum of the value of quantities invoiced (IT102) for each IT1 segment.
Example: CTT*1
Transaction Set Trailer
To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
Total number of segments included in a transaction set including ST and SE segments
Functional Group Trailer
To indicate the end of a functional group and to provide control information
Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element
Interchange Control Trailer
To define the end of an interchange of zero or more functional groups and interchange-related control segments
Sample 1
GS*IN*SENDERGS*RECEIVERGS*20240508*231514*000000001*X*004010~
BIG*20000425*12351199**1999999999~
IT1*02*1*EA*25.75~
TDS*12575~
TXI*EV*50~
CAD*ZZ****1234567**CN*1TR95786957695~
SAC*A*B800***325~
CTT*1~
GE*1*000000001~
IEA*1*000000001~
Stedi is a registered trademark of Stedi, Inc. All names, logos, and brands of third parties listed on this page are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.