X12 824 Application Advice

X12 Release 4010

This Draft Standard for Trial Use contains the format and establishes the data contents of the Application Advice Transaction Set (824) for use within the context of an Electronic Data Interchange (EDI) environment. The transaction set can be used to provide the ability to report the results of an application system's data content edits of transaction sets. The results of editing transaction sets can be reported at the functional group and transaction set level, in either coded or free-form format. It is designed to accommodate the business need of reporting the acceptance, rejection or acceptance with change of any transaction set. The Application Advice should not be used in place of a transaction set designed as a specific response to another transaction set (e.g., purchase order acknowledgment sent in response to a purchase order).

Delimiters

• ~ Segment
• * Element
• > Component

ISA Interchange Control Header

Required · Max use 1

To start and identify an interchange of zero or more functional groups and interchange-related control segments

ISA-01 · I01 · Authorization Information Qualifier · Required · Identifier (ID)

Code to identify the type of information in the Authorization Information

• 00: No Authorization Information Present (No Meaningful Information in I02)

ISA-02 · I02 · Authorization Information · Required · String (AN) · Min 10 Max 10

Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)

ISA-03 · I03 · Security Information Qualifier · Required · Identifier (ID)

Code to identify the type of information in the Security Information

• 00: No Security Information Present (No Meaningful Information in I04)

ISA-04 · I04 · Security Information · Required · String (AN) · Min 10 Max 10

This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)

ISA-05 · I05 · Interchange ID Qualifier · Required · Identifier (ID) · Min 2 Max 2

Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified

Codes

• 01: Duns (Dun & Bradstreet)
• 02: SCAC (Standard Carrier Alpha Code)
• 03: FMC (Federal Maritime Commission)
• 04: IATA (International Air Transport Association)
• 08: UCC EDI Communications ID (Comm ID)
• 09: X.121 (CCITT)
• 10: Department of Defense (DoD) Activity Address Code
• 11: DEA (Drug Enforcement Administration)
• 12: Phone (Telephone Companies)
• 13: UCS Code (The UCS Code is a Code Used for UCS Transmissions; it includes the Area Code and Telephone Number of a Modem; it Does Not Include Punctuation, Blanks or Access Code)
• 14: Duns Plus Suffix
• 15: Petroleum Accountants Society of Canada Company Code
• 16: Duns Number With 4-Character Suffix
• 17: American Bankers Association (ABA) Transit Routing Number (Including Check Digit, 9 Digit)
• 18: Association of American Railroads (AAR) Standard Distribution Code
• 19: EDI Council of Australia (EDICA) Communications ID Number (COMM ID)
• 20: Health Industry Number (HIN)
• 21: Integrated Postsecondary Education Data System, or (IPEDS)
• 22: Federal Interagency Commission on Education, or FICE
• 23: National Center for Education Statistics Common Core of Data 12-Digit Number for Pre-K-Grade 12 Institutes, or NCES
• 24: The College Board's Admission Testing Program 4-Digit Code of Postsecondary Institutes, or ATP
• 25: American College Testing Program 4-Digit Code of Postsecondary Institutions, or ACT
• 26: Statistics of Canada List of Postsecondary Institutions
• 27: Carrier Identification Number as assigned by Health Care Financing Administration (HCFA)
• 28: Fiscal Intermediary Identification Number as assigned by Health Care Financing Administration (HCFA)
• 29: Medicare Provider and Supplier Identification Number as assigned by Health Care Financing Administration (HCFA)
• 30: U.S. Federal Tax Identification Number
• 31: Jurisdiction Identification Number Plus 4 as assigned by the International Association of Industrial Accident Boards and Commissions (IAIABC)
• 32: U.S. Federal Employer Identification Number (FEIN)
• 33: National Association of Insurance Commissioners Company Code (NAIC)
• 34: Medicaid Provider and Supplier Identification Number as assigned by individual State Medicaid Agencies in conjunction with Health Care Financing Administration (HCFA)
• 35: Statistics Canada Canadian College Student Information System Institution Codes
• 36: Statistics Canada University Student Information System Institution Codes
• 37: Society of Property Information Compilers and Analysts
• AM: Association Mexicana del Codigo de Producto (AMECOP) Communication ID
• NR: National Retail Merchants Association (NRMA) - Assigned
• SN: Standard Address Number
• ZZ: Mutually Defined

ISA-06 · I06 · Interchange Sender ID · Required · String (AN) · Min 15 Max 15

Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element

ISA-07 · I05 · Interchange ID Qualifier · Required · Identifier (ID) · Min 2 Max 2

Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified

Codes

• 01: Duns (Dun & Bradstreet)
• 02: SCAC (Standard Carrier Alpha Code)
• 03: FMC (Federal Maritime Commission)
• 04: IATA (International Air Transport Association)
• 08: UCC EDI Communications ID (Comm ID)
• 09: X.121 (CCITT)
• 10: Department of Defense (DoD) Activity Address Code
• 11: DEA (Drug Enforcement Administration)
• 12: Phone (Telephone Companies)
• 13: UCS Code (The UCS Code is a Code Used for UCS Transmissions; it includes the Area Code and Telephone Number of a Modem; it Does Not Include Punctuation, Blanks or Access Code)
• 14: Duns Plus Suffix
• 15: Petroleum Accountants Society of Canada Company Code
• 16: Duns Number With 4-Character Suffix
• 17: American Bankers Association (ABA) Transit Routing Number (Including Check Digit, 9 Digit)
• 18: Association of American Railroads (AAR) Standard Distribution Code
• 19: EDI Council of Australia (EDICA) Communications ID Number (COMM ID)
• 20: Health Industry Number (HIN)
• 21: Integrated Postsecondary Education Data System, or (IPEDS)
• 22: Federal Interagency Commission on Education, or FICE
• 23: National Center for Education Statistics Common Core of Data 12-Digit Number for Pre-K-Grade 12 Institutes, or NCES
• 24: The College Board's Admission Testing Program 4-Digit Code of Postsecondary Institutes, or ATP
• 25: American College Testing Program 4-Digit Code of Postsecondary Institutions, or ACT
• 26: Statistics of Canada List of Postsecondary Institutions
• 27: Carrier Identification Number as assigned by Health Care Financing Administration (HCFA)
• 28: Fiscal Intermediary Identification Number as assigned by Health Care Financing Administration (HCFA)
• 29: Medicare Provider and Supplier Identification Number as assigned by Health Care Financing Administration (HCFA)
• 30: U.S. Federal Tax Identification Number
• 31: Jurisdiction Identification Number Plus 4 as assigned by the International Association of Industrial Accident Boards and Commissions (IAIABC)
• 32: U.S. Federal Employer Identification Number (FEIN)
• 33: National Association of Insurance Commissioners Company Code (NAIC)
• 34: Medicaid Provider and Supplier Identification Number as assigned by individual State Medicaid Agencies in conjunction with Health Care Financing Administration (HCFA)
• 35: Statistics Canada Canadian College Student Information System Institution Codes
• 36: Statistics Canada University Student Information System Institution Codes
• 37: Society of Property Information Compilers and Analysts
• AM: Association Mexicana del Codigo de Producto (AMECOP) Communication ID
• NR: National Retail Merchants Association (NRMA) - Assigned
• SN: Standard Address Number
• ZZ: Mutually Defined

ISA-08 · I07 · Interchange Receiver ID · Required · String (AN) · Min 15 Max 15

Identification code published by the receiver of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them

ISA-09 · I08 · Interchange Date · Required · Date (DT) · YYMMDD format

Date of the interchange

ISA-10 · I09 · Interchange Time · Required · Time (TM) · HHMM format

Time of the interchange

ISA-11 · I10 · Interchange Control Standards Identifier · Required · Identifier (ID)

Code to identify the agency responsible for the control standard used by the message that is enclosed by the interchange header and trailer

• U: U.S. EDI Community of ASC X12, TDCC, and UCS

ISA-12 · I11 · Interchange Control Version Number · Required · Identifier (ID)

This version number covers the interchange control segments

• 00401: Draft Standards for Trial Use Approved for Publication by ASC X12 Procedures Review Board through October 1997

ISA-13 · I12 · Interchange Control Number · Required · Numeric (N0) · Min 9 Max 9

A control number assigned by the interchange sender

ISA-14 · I13 · Acknowledgment Requested · Required · Identifier (ID) · Min 1 Max 1

Code sent by the sender to request an interchange acknowledgment (TA1)

• 0: No Acknowledgment Requested
• 1: Interchange Acknowledgment Requested

ISA-15 · I14 · Usage Indicator · Required · Identifier (ID) · Min 1 Max 1

Code to indicate whether data enclosed by this interchange envelope is test, production or information

• I: Information
• P: Production Data
• T: Test Data

ISA-16 · I15 · Component Element Separator · Required · String (AN) · Min 1 Max 1

Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator

• >: Component Element Separator

GS Functional Group Header

Required · Max use 1

To indicate the beginning of a functional group and to provide control information

GS-01 · 479 · Functional Identifier Code · Required · Identifier (ID)

Code identifying a group of application related transaction sets

• AG: Application Advice (824)

GS-02 · 142 · Application Sender's Code · Required · String (AN) · Min 2 Max 15

Code identifying party sending transmission; codes agreed to by trading partners

GS-03 · 124 · Application Receiver's Code · Required · String (AN) · Min 2 Max 15

Code identifying party receiving transmission. Codes agreed to by trading partners

GS-04 · 373 · Date · Required · Date (DT) · CCYYMMDD format

Date expressed as CCYYMMDD

GS-05 · 337 · Time · Required · Time (TM) · HHMM, HHMMSS, HHMMSSD, or HHMMSSDD format

Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)

GS-06 · 28 · Group Control Number · Required · Numeric (N0) · Min 1 Max 9

Assigned number originated and maintained by the sender

GS-07 · 455 · Responsible Agency Code · Required · Identifier (ID) · Min 1 Max 2

Code used in conjunction with Data Element 480 to identify the issuer of the standard

• T: Transportation Data Coordinating Committee (TDCC)
• X: Accredited Standards Committee X12

GS-08 · 480 · Version / Release / Industry Identifier Code · Required · String (AN)

Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed

• 004010: Draft Standards Approved for Publication by ASC X12 Procedures Review Board through October 1997

Heading

010 Heading > ST

ST Transaction Set Header

Required · Max use 1

To indicate the start of a transaction set and to assign a control number

ST-01 · 143 · Transaction Set Identifier Code · Required · Identifier (ID)

Code uniquely identifying a Transaction Set

• The transaction set identifier (ST01) used by the translation routines of the interchange partners to select the appropriate transaction set definition (e.g., 810 selects the Invoice Transaction Set).

• 824: Application Advice

ST-02 · 329 · Transaction Set Control Number · Required · Numeric (N) · Min 4 Max 9

Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set

020 Heading > BGN

BGN Beginning Segment

Required · Max use 1

To indicate the beginning of a transaction set

BGN-01 · 353 · Transaction Set Purpose Code · Required · Identifier (ID)

Code identifying purpose of transaction set

• 00: Original

BGN-02 · 127 · Reference Identification · Required · String (AN) · Min 1 Max 30

Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier

• BGN02 is the transaction set reference number.

Usage notes

Application Advice Numbers are unique by transaction type code, OTI10. The Application Advice Number will not repeat within a year.

BGN-03 · 373 · Date · Required · Date (DT) · CCYYMMDD format

Date expressed as CCYYMMDD

• BGN03 is the transaction set date.

BGN-04 · 337 · Time · Required · Time (TM) · HHMM, HHMMSS, HHMMSSD, or HHMMSSDD format

Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)

• BGN04 is the transaction set time.

Usage notes

HHMM Format

N1 Loop Plant Required Max >1

Variants (all may be used)

N1 Loop Ship ToN1 Loop Supplier/Manufacturer

030 Heading > N1 Loop Plant > N1

N1 Name

Required · Max use 1

To identify a party by type of organization, name, and code

N1-01 · 98 · Entity Identifier Code · Required · Identifier (ID)

Code identifying an organizational entity, a physical location, property or an individual

• 16: Plant

N1-03 · 66 · Identification Code Qualifier · Required · Identifier (ID)

Code designating the system/method of code structure used for Identification Code (67)

• 6: Plant Code

N1-04 · 67 · Identification Code · Required · String (AN) · Min 2 Max 80

Code identifying a party or other code

• This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.

Usage notes

This is the Honda code for each logistical company.
For example: (May not be an all-inclusive list.)

AEP = Anna Engine Plant
AHM = American Honda Motor Co., Inc.
ELP = East Liberty Auto Plant
GDL = Honda de México, Guadalajara Plant (Ending ~ TBD 2019)
HCL = Honda de México, Celaya Plant
HCM = Honda of Canada Mfg.
HDM = Honda de México, Guadalajara Plant (Starting ~ TBD 2019)
HMA = Honda Manufacturing of Alabama
HMI = Honda Manufacturing of Indiana
HMS = Honda México Sales
HPE = Honda Power Equipment
HPG = Honda Precision Parts Georgia
HSC = Honda of South Carolina
HSP = Honda Supply Parts
HTM = Honda Transmission
IPS = Int’l Operating Office (IOO), aka Int’l Parts Supply
MAP = Marysville Auto Plant
MPS = Honda de México Parts Supply
MSP = Mexico Supply Parts
MTP = Mexican Transmission Plant
PMC = Performance Manufacturing Center
T(XX) = Honda Trading [The “(XX)” will be replaced with two digits signifying the Honda Trading location]

N1 Loop Ship To Optional Max 1

Variants (all may be used)

N1 Loop PlantN1 Loop Supplier/Manufacturer

030 Heading > N1 Loop Ship To > N1

N1 Name

Required · Max use 1

To identify a party by type of organization, name, and code

N1-01 · 98 · Entity Identifier Code · Required · Identifier (ID)

Code identifying an organizational entity, a physical location, property or an individual

• ST: Ship To

N1-02 · 93 · Name · Required · String (AN) · Min 1 Max 60

Free-form name

Usage notes

This is the code assigned by Honda for the ship to location from the
corresponding 856.

N1 Loop Supplier/Manufacturer Required Max 1

Variants (all may be used)

N1 Loop PlantN1 Loop Ship To

030 Heading > N1 Loop Supplier/Manufacturer > N1

N1 Name

Required · Max use 1

To identify a party by type of organization, name, and code

N1-01 · 98 · Entity Identifier Code · Required · Identifier (ID)

Code identifying an organizational entity, a physical location, property or an individual

• SU: Supplier/Manufacturer

N1-02 · 93 · Name · Required · String (AN) · Min 1 Max 60

Free-form name

N1-03 · 66 · Identification Code Qualifier · Required · Identifier (ID)

Code designating the system/method of code structure used for Identification Code (67)

• 92: Assigned by Buyer or Buyer's Agent

N1-04 · 67 · Identification Code · Required · String (AN) · Min 2 Max 80

Code identifying a party or other code

• This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.

Usage notes

An 8-digit code assigned by Honda to identify a specific supplier and location. The first 6 digits are the supplier number and the last 2 digits are the location code (which may be 00).

050 Heading > N1 Loop Supplier/Manufacturer > N3

N3 Address Information

Required · Max use 2

To specify the location of the named party

N3-01 · 166 · Address Information · Required · String (AN) · Min 1 Max 55

Address information

N3-02 · 166 · Address Information · Optional · String (AN) · Min 1 Max 55

Address information

060 Heading > N1 Loop Supplier/Manufacturer > N4

N4 Geographic Location

Required · Max use 1

To specify the geographic place of the named party

N4-01 · 19 · City Name · Required · String (AN) · Min 2 Max 30

Free-form text for city name

• A combination of either N401 through N404, or N405 and N406 may be adequate to specify a location.

N4-02 · 156 · State or Province Code · Required · Identifier (ID) · Min 2 Max 2

Code (Standard State/Province) as defined by appropriate government agency

• N402 is required only if city name (N401) is in the U.S. or Canada.

N4-03 · 116 · Postal Code · Required · Identifier (ID) · Min 3 Max 15

Code defining international postal zone code excluding punctuation and blanks (zip code for United States)

N4-04 · 26 · Country Code · Required · Identifier (ID) · Min 2 Max 3

Code identifying the country

080 Heading > N1 Loop Supplier/Manufacturer > PER

PER Administrative Communications Contact

Required · Max use 3

To identify a person or office to whom administrative communications should be directed

PER-01 · 366 · Contact Function Code · Required · Identifier (ID)

Code identifying the major duty or responsibility of the person or group named

• SU: Supplier Contact

PER-02 · 93 · Name · Required · String (AN) · Min 1 Max 60

Free-form name

Detail

OTI Loop Required Max >1

010 Detail > OTI Loop > OTI

OTI Original Transaction Identification

Required · Max use 1

To identify the edited transaction set and the level at which the results of the edit are reported, and to indicate the accepted, rejected, or accepted-with-change edit result

• The OTI loop is intended to provide a unique identification of the transaction set that is the subject of this application acknowledgment.

OTI-01 · 110 · Application Acknowledgment Code · Required · Identifier (ID)

Code indicating the application system edit results of the business data

Usage notes

Only resend the transaction set when this element (OTI01) indicates a reject (TR).

• TA: Transaction Set Accept
• TE: Transaction Set Accept with Error
• TR: Transaction Set Reject

OTI-02 · 128 · Reference Identification Qualifier · Required · Identifier (ID)

Code qualifying the Reference Identification

• OTI02 contains the qualifier identifying the business transaction from the original business application, and OTI03 will contain the original business application identification.

• SI: Shipper's Identifying Number for Shipment (SID)
  Indicates this 824 is in response to an ASN (856)

OTI-03 · 127 · Reference Identification · Required · String (AN) · Min 1 Max 30

Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier

• OTI03 is the primary reference identification or number used to uniquely identify the original transaction set.

Usage notes

For an ASN, this will be the ASN Number (BSN02) from the original document.

OTI-06 · 373 · Date · Required · Date (DT) · CCYYMMDD format

Date expressed as CCYYMMDD

• OTI06 is the group date.

Usage notes

This date applies to the document that is in error.
If a Honda supplier sends an original and replacement ASN (both with the same ASN number), the date (OTI06) and time (OTI07) will allow the supplier to link the appropriate 824 and ASN.

OTI-07 · 337 · Time · Required · Time (TM) · HHMM, HHMMSS, HHMMSSD, or HHMMSSDD format

Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)

• OTI07 is the group time.

Usage notes

HHMM Format

OTI-10 · 143 · Transaction Set Identifier Code · Required · Identifier (ID)

Code uniquely identifying a Transaction Set

• 856: Ship Notice/Manifest

TED Loop Required Max >1

070 Detail > OTI Loop > TED Loop > TED

TED Technical Error Description

Required · Max use 1

To identify the error and, if feasible, the erroneous segment, or data element, or both

Usage notes

This segment will be sent even if an error did not occur. General information will be transmitted if an error did not occur.

TED-01 · 647 · Application Error Condition Code · Required · Identifier (ID)

Code indicating application error condition

• ZZZ: Mutually Defined

TED-02 · 3 · Free Form Message · Required · String (AN) · Min 1 Max 60

Free-form text

• If used, TED02 will contain a generic description of the data in error (e.g., part number, date, reference number, etc.).

Usage notes

If there was an error, there will be an error message. For example, "unit of
measure invalid".
If there was no error, a message stating the ASN is valid will appear.

TED-07 · 724 · Copy of Bad Data Element · Optional · String (AN) · Min 1 Max 99

This is a copy of the data element in error

Usage notes

If there was an error, this field will contain the actual data that was in error if available. For example: Error Data = BZ
If there was no error, the ASN number will appear.

080 Detail > OTI Loop > TED Loop > NTE

NTE Note/Special Instruction

Optional · Max use 100

To transmit information in a free-form format, if necessary, for comment or special instruction

Usage notes

This segment will be provided only if data is available.

NTE-01 · 363 · Note Reference Code · Required · Identifier (ID)

Code identifying the functional area or purpose for which the note applies

• ADD: Additional Information

NTE-02 · 352 · Description · Required · String (AN) · Min 1 Max 80

A free-form description to clarify the related data elements and their content

Usage notes

Examples:
Error Description (TED02) = unit of measure invalid
Error Data (TED03) = BZ
Reference Data (NTE02) = 123456SM1A000 (Honda part number associated with 'invalid unit of measure')

090 Detail > SE

SE Transaction Set Trailer

Required · Max use 1

To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)

SE-01 · 96 · Number of Included Segments · Required · Numeric (N0) · Min 1 Max 10

Total number of segments included in a transaction set including ST and SE segments

SE-02 · 329 · Transaction Set Control Number · Required · Numeric (N) · Min 4 Max 9

Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set

GE Functional Group Trailer

Required · Max use 1

To indicate the end of a functional group and to provide control information

GE-01 · 97 · Number of Transaction Sets Included · Required · Numeric (N0) · Min 1 Max 6

Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element

GE-02 · 28 · Group Control Number · Required · Numeric (N0) · Min 1 Max 9

Assigned number originated and maintained by the sender

IEA Interchange Control Trailer

Required · Max use 1

To define the end of an interchange of zero or more functional groups and interchange-related control segments

IEA-01 · I16 · Number of Included Functional Groups · Required · Numeric (N0) · Min 1 Max 5

A count of the number of functional groups included in an interchange

IEA-02 · I12 · Interchange Control Number · Required · Numeric (N0) · Min 9 Max 9

A control number assigned by the interchange sender