X12 855 Purchase Order Acknowledgment
This Draft Standard for Trial Use contains the format and establishes the data contents of the Purchase Order Acknowledgment Transaction Set (855) for use within the context of an Electronic Data Interchange (EDI) environment. The transaction set can be used to provide for customary and established business and industry practice relative to a seller's acknowledgment of a buyer's purchase order. This transaction set can also be used as notification of a vendor generated order. This usage advises a buyer that a vendor has or will ship merchandise as prearranged in their partnership.
- ~ Segment
- * Element
- > Component
- ^ Repetition
- None included
Interchange Control Header
To start and identify an interchange of zero or more functional groups and interchange-related control segments
Code identifying the type of information in the Authorization Information
- 00
- No Authorization Information Present (No Meaningful Information in I02)
Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
Code identifying the type of information in the Security Information
- 00
- No Security Information Present (No Meaningful Information in I04)
This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
Code indicating the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
Code indicating the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the receiver of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
Type is not applicable; the repetition separator is a delimiter and not a data element; this field provides the delimiter used to separate repeated occurrences of a simple data element or a composite data structure; this value must be different than the data element separator, component element separator, and the segment terminator
- ^
- Repetition Separator
Code specifying the version number of the interchange control segments
- 00403
- Draft Standards for Trial Use Approved for Publication by ASC X12 Procedures Review Board through October 1999
A control number assigned by the interchange sender
Code indicating sender's request for an interchange acknowledgment
- 0
- No Acknowledgment Requested
- 1
- Interchange Acknowledgment Requested
Code indicating whether data enclosed by this interchange envelope is test, production or information
- I
- Information
- P
- Production Data
- T
- Test Data
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
- >
- Component Element Separator
Functional Group Header
To indicate the beginning of a functional group and to provide control information
Code identifying a group of application related transaction sets
- PR
- Purchase Order Acknowledgment (855)
Code identifying party sending transmission; codes agreed to by trading partners
Code identifying party receiving transmission; codes agreed to by trading partners
Date expressed as CCYYMMDD where CC represents the first two digits of the calendar year
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Assigned number originated and maintained by the sender
Code identifying the issuer of the standard; this code is used in conjunction with Data Element 480
- T
- Transportation Data Coordinating Committee (TDCC)
- X
- Accredited Standards Committee X12
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
- 004030
- Draft Standards Approved for Publication by ASC X12 Procedures Review Board through October 1999
Heading
Transaction Set Header
To indicate the start of a transaction set and to assign a control number
Code uniquely identifying a Transaction Set
- The transaction set identifier (ST01) is used by the translation routines of the interchange partners to select the appropriate transaction set definition (e.g., 810 selects the Invoice Transaction Set).
- 855
- Purchase Order Acknowledgment
Beginning Segment for Purchase Order Acknowledgment
To indicate the beginning of the Purchase Order Acknowledgment Transaction Set and transmit identifying numbers and dates
Code identifying purpose of transaction set
- 00
- Original
Code specifying the type of acknowledgment
Acknowledgment types are used to accept the purchase order with no
changes or to accept the purchase order with changes. The only change allowed is a change to the unit cost. If a unit cost change is requested and accepted by the retailer, a purchase order change (EDI 860) will be sent reflecting the agreed to unit cost. If the unit cost change is rejected by the retailer, a purchase order cancellation (EDI 860) will be sent cancelling the original purchase order.
- AC
- Acknowledge - With Detail and Change
- AT
- Accepted
Identifying number for Purchase Order assigned by the orderer/purchaser
Reference Identification
To transmit identifying information as specified by the Reference Identification Qualifier
Text
To specify textual data
Code identifying the functional area or purpose for which the note applies
This text is to allow the supplier to provide details about a unit cost change such as the metals pricing the unit cost is based on.
- ZZZ
- Mutually Defined
Detail
Baseline Item Data
To specify basic and most frequently used line item data
- PO102 is required.
The codes listed for PO106 apply to every occurrence of Data Element 235 in the PO1 segment.
This segment is required for VMI orders.
Quantity ordered
This element must equal the original quantity ordered. Quantity changes
are not accepted.
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
This element must equal the original unit of measure code. Unit of
measure code changes are not accepted.
- CA
- Case
- EA
- Each
- PR
- Pair
- ST
- Set
Price per unit of product, service, commodity, etc.
The price is sent with a decimal point only when needed, e.g., $219.99
would be sent as "219.99", and $289.00 would be sent as "289".
To indicate a no charge item or free goods, PO104 will contain a single zero (0) and PO105 will contain code NC.
SKU cost price. Cost price is per unit of measure. Price contains a
maximum of five integer and two decimal positions for all retail merchandise.
Code identifying the type of unit price for an item
This data element is used to clarify the basis of unit price. The unit price
expressed in PO104 is always in the same terms as the unit of measure in PO103.
- NC
- No Charge
- WH
- Wholesale
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- PO106 through PO125 provide for ten different product/service IDs per each item. For example: Case, Color, Drawing No., U.P.C. No., ISBN No., Model No., or SKU.
- IN
- Buyer's Item Number
Identifying number for a product or service
This is the Retailer's identification number for the item. This is required.
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- VN
- Vendor's (Seller's) Item Number
Summary
Transaction Totals
To transmit a hash total for a specific element in the transaction set
- The number of line items (CTT01) is the accumulation of the number of PO1 segments. If used, hash total (CTT02) is the sum of the value of quantities ordered (PO102) for each PO1 segment.
Transaction Set Trailer
To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
Total number of segments included in a transaction set including ST and SE segments
Functional Group Trailer
To indicate the end of a functional group and to provide control information
Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element
Interchange Control Trailer
To define the end of an interchange of zero or more functional groups and interchange-related control segments
Stedi is a registered trademark of Stedi, Inc. All names, logos, and brands of third parties listed on this page are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.