X12 315 Status Details (Ocean) (Consignee/Shipper)
This Draft Standard for Trial Use contains the format and establishes the data contents of the Status Details (Ocean) Transaction Set (315) for use within the context of an Electronic Data Interchange (EDI) environment. The transaction set can be used to provide all the information necessary to report status or event details for selected shipments or containers. It is intended to accommodate the details for one status or event associated with many shipments or containers, as well as more than one status or event for one shipment or container.
- ~ Segment
- * Element
- > Component
Interchange Control Header
To start and identify an interchange of zero or more functional groups and interchange-related control segments
Code to identify the type of information in the Authorization Information
- 00
- No Authorization Information Present (No Meaningful Information in I02)
Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
Code to identify the type of information in the Security Information
- 00
- No Security Information Present (No Meaningful Information in I04)
This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the receiver of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
Code to identify the agency responsible for the control standard used by the message that is enclosed by the interchange header and trailer
- U
- U.S. EDI Community of ASC X12, TDCC, and UCS
This version number covers the interchange control segments
- 00401
- Draft Standards for Trial Use Approved for Publication by ASC X12 Procedures Review Board through October 1997
A control number assigned by the interchange sender
Code sent by the sender to request an interchange acknowledgment (TA1)
- 0
- No Acknowledgment Requested
- 1
- Interchange Acknowledgment Requested
Code to indicate whether data enclosed by this interchange envelope is test, production or information
- I
- Information
- P
- Production Data
- T
- Test Data
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
- >
- Component Element Separator
Functional Group Header
To indicate the beginning of a functional group and to provide control information
Code identifying a group of application related transaction sets
- QO
- Ocean Shipment Status Information (313, 315)
Code identifying party sending transmission; codes agreed to by trading partners
Code identifying party receiving transmission. Codes agreed to by trading partners
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Assigned number originated and maintained by the sender
Code used in conjunction with Data Element 480 to identify the issuer of the standard
- T
- Transportation Data Coordinating Committee (TDCC)
- X
- Accredited Standards Committee X12
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
- 004010
- Draft Standards Approved for Publication by ASC X12 Procedures Review Board through October 1997
Heading
Transaction Set Header
To indicate the start of a transaction set and to assign a control number
Code uniquely identifying a Transaction Set
- The transaction set identifier (ST01) used by the translation routines of the interchange partners to select the appropriate transaction set definition (e.g., 810 selects the Invoice Transaction Set).
- 315
- Status Details (Ocean)
Beginning Segment for Inquiry or Reply
To transmit identifying numbers, dates, and other basic data relating to the transaction set
Code indicating the status of a shipment
- 3
- Returned to Shipper
- AB
- Delivery appointment scheduled
- AE
- Loaded on Vessel
- AF
- Departed Pickup Location
- AL
- Loaded on Rail
- AM
- Loaded on Truck
- AP
- Loaded on Feeder Vessel
- AR
- Rail Arrival at Destination Intermodal Ramp
- AV
- Available for Delivery
- BE
- Estimated Time of Arrival at Scheduled Pick-up Location
- C
- Estimated To Depart Terminal Location
- CD
- Received at Origin
- CT
- Customs Released
- D
- Completed Unloading at Delivery Location
- E
- Estimated to Arrive (En Route)
- EA
- Estimate Approved
- ED
- Early Delivery Appointment Date and/or Time
- EV
- Estimated available for delivery
- FE
- Free time expired
- FT
- Free Time Expired
- I
- In-Gate
- K
- Arrived at Customs
- OA
- Out-Gate
- OD
- Destination
- RB
- Delivery Appointment Requested
- RD
- Return Container
- RL
- Rail Departure from Origin Intermodal Ramp
- SD
- Shipment Delayed
- UR
- Unloaded from a Rail Car
- UV
- Unloaded From Vessel
- VA
- Vessel Arrival
- VD
- Vessel Departure
- X1
- Arrived at Delivery Location
- X2
- Estimated Time of Arrival at Consignee Location
- Y6
- Estimated time of Arrival to Destination Rail Ramp
- Y9
- Gate out at Destination Rail Ramp
- ZZ
- Mutually Defined
Date expressed as CCYYMMDD
- B404 is the date of last reported status of cargo.
Air shipment: Airport code for last reported status for a shipment; (Note: If the shipment is in-flight, the status location is the origin airport for this flight) Ground transportation: Code of carrier's terminal
Prefix or alphabetic part of an equipment unit's identifying number
Sequencing or serial part of an equipment unit's identifying number (pure numeric form for equipment number is preferred)
Code indicating status of equipment
- AA
- Empty and Available at Pool
- L
- Load
Code identifying type of location.
B412 location qualifier must match the code used in R402
- CI
- City
- UN
- United Nations Location Code (UNLOCODE)
Reference Identification
To transmit identifying information as specified by the Reference Identification Qualifier
Code qualifying the Reference Identification
- 4F
- Carrier-assigned Shipper Number
- BM
- Bill of Lading Number
- BN
- Booking Number
- EQ
- Equipment Number
- MB
- Master Bill of Lading
- PO
- Purchase Order Number
- SCA
- Standard Carrier Alpha Code (SCAC)
- SI
- Shipper's Identifying Number for Shipment (SID)
- SN
- Seal Number
Reference information as defined for a particular Transaction Set or as specified by the Reference Identification Qualifier
Status Details (Ocean)
To transmit identifying information relative to identification of vessel, transportation dates, lading quantity, weight, and cube
Code identifying vessel.
The vessel reported is origin vessel.
Identifying designator for the particular flight or voyage on which the cargo travels
Code specifying vessel code source
- L
- Lloyd's Register of Shipping
Port or Terminal
Contractual or operational port or point relevant to the movement of the cargo
Code defining function performed at the port or terminal with respect to a shipment
- B
- Reconsolidation Point (Operational)
- C
- De-Consolidation Point (Operational)
- D
- Port of Discharge (Operational)
- E
- Place of Delivery (Contractual)
- I
- Interim Point (Operational)
- L
- Port of Loading (Operational)
- R
- Place of Receipt (Contractual)
- T
- Transshipment Port (Contractual)
Code identifying type of location
- CI
- City
- UN
- United Nations Location Code (UNLOCODE)
Free-form name for the place at which an offshore carrier originates or terminates (by transshipment or otherwise) its actual ocean carriage of property
Date/Time Reference
To specify pertinent dates and times
Code specifying type of date or time, or both date and time.
Qualifier 139, indicates the date is an estimated date and time of the vessel arrival or
departed from a location. For example, location ‘L’ port of loading.
Qualifier 140, indicates the date is an actual date and time
- 139
- Estimated
- 140
- Actual
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Code identifying the time. In accordance with International Standards Organization standard 8601, time can be specified by a + or - and an indication in hours in relation to Universal Time Coordinate (UTC) time; since + is a restricted character, + and - are substituted by P and M in the codes that follow
- LT
- Local Time
- UT
- Universal Time Coordinate
Transaction Set Trailer
To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
Total number of segments included in a transaction set including ST and SE segments
Functional Group Trailer
To indicate the end of a functional group and to provide control information
Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element
Interchange Control Trailer
To define the end of an interchange of zero or more functional groups and interchange-related control segments
Container on board vessel at port of loading
*190910*1801*U*00401*000003035*0*P*>~
GS*QO*FLEXPORTEDI*PARTNERID*20190910*1801*3035*X*004010~
ST*315*0001~
B4***AE*20181221*2207*CNDCB*MSCU*595956*L*45U1*SHENZHEN*UN*6~
N9*BM*FLEX009*BILL OF LADING~
N9*BN*123456789*BKG NBR~
N9*EQ*MSCU5959566*EQT ID~
N9*4F*33333*CUSTOMER CODE~
N9*SI*FLEX-09870*FLEXPORT SHIPMENT ID~
Q2*9516478********V1***L*COSCO DENMARK~
R4*R*UN*CNDCB*SHENZHEN*CN~
DTM*140*20180905*1105*LT~
R4*L*UN*CNDCB*SHENZHEN*CN~
DTM*139*20180905*1105*LT~
R4*I*UN*KRPUS*BUSAN*KR~
DTM*139*20180906*1106*LT~
R4*D*UN*HKHKG*HONG KONG*HK~
DTM*139*20180908*1108*LT~
R4*E*UN*HKHKG*HONG KONG*HK~
DTM*139*20180908*1108*LT~
SE*19*0001~
GE*1*3035~
IEA*1*000003035~
Vessel actual arrival at transport
*190910*1801*U*00401*000003037*0*P*>~
GS*QO*FLEXPORTEDI*PARTNERID*20190910*1801*3037*X*004010~
ST*315*0001~
B4***VA*20180909*0400*HKHKG*MSCU*595956*L*45U1*HONG KONG*UN*6~
N9*BM*FLEX009*BILL OF LADING~
N9*BN*123456789*BKG NBR~
N9*EQ*MSCU5959566*EQT ID~
N9*4F*33333*CUSTOMER CODE~
N9*SI*FLEX-09870*FLEXPORT SHIPMENT ID~
Q2*9402029********V2***L*MAERSK BATUR~
R4*R*UN*CNDCB*SHENZHEN*CN~
DTM*140*20180905*1105*LT~
R4*L*UN*CNDCB*SHENZHEN*CN~
DTM*140*20180905*1105*LT~
R4*I*UN*KRPUS*BUSAN*KR~
DTM*140*20180907*1107*LT~
R4*D*UN*HKHKG*HONG KONG*HK~
DTM*139*20180909*1109*LT~
R4*E*UN*HKHKG*HONG KONG*HK~
DTM*139*20180909*1109*LT~
SE*19*0001~
GE*1*3037~
IEA*1*000003037~
Vessel actual departure from port of loading
*190910*1801*U*00401*000003036*0*P*>~
GS*QO*FLEXPORTEDI*PARTNERID*20190910*1801*3036*X*004010~
ST*315*0001~
B4***VD*20180905*1600*CNDCB*MSCU*595956*L*45U1*SHENZHEN*UN*6~
N9*BM*FLEX010*BILL OF LADING~
N9*BN*123456789*BKG NBR~
N9*EQ*MSCU5959566*EQT ID~
N9*4F*33333*CUSTOMER CODE~
N9*SI*FLEX-09870*FLEXPORT SHIPMENT ID~
Q2*9516478********V1***L*COSCO DENMARK~
R4*R*UN*CNDCB*SHENZHEN*CN~
DTM*140*20180905*1105*LT~
R4*L*UN*CNDCB*SHENZHEN*CN~
DTM*140*20180905*1105*LT~
R4*I*UN*KRPUS*BUSAN*KR~
DTM*139*20180906*1106*LT~
R4*D*UN*HKHKG*HONG KONG*HK~
DTM*139*20180908*1108*LT~
R4*E*UN*HKHKG*HONG KONG*HK~
DTM*139*20180908*1108*LT~
SE*19*0001~
GE*1*3036~
IEA*1*000003036~
Stedi is a registered trademark of Stedi, Inc. All names, logos, and brands of third parties listed on this page are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.