![Buckle logo](https://public-assets.guides.us.stedi.com/362f396e-5870-4d3a-9d1c-007c8e8b22a0/account-config/logo.webp?v=1699037264211)
X12 997 Functional Acknowledgment (v6010)
This X12 Transaction Set contains the format and establishes the data contents of the Functional Acknowledgment Transaction Set (997) for use within the context of an Electronic Data Interchange (EDI) environment. The transaction set can be used to define the control structures for a set of acknowledgments to indicate the results of the syntactical analysis of the electronically encoded documents. The encoded documents are the transaction sets, which are grouped in functional groups, used in defining transactions for business data interchange. This standard does not cover the semantic meaning of the information encoded in the transaction sets.
- ~ Segment
- * Element
- > Component
- ^ Repetition
- None included
Interchange Control Header
To start and identify an interchange of zero or more functional groups and interchange-related control segments
Code identifying the type of information in the Authorization Information
- 00
- No Authorization Information Present (No Meaningful Information in I02)
Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
Code identifying the type of information in the Security Information
- 00
- No Security Information Present (No Meaningful Information in I04)
This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
Code indicating the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
Code indicating the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the receiver of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
Type is not applicable; the repetition separator is a delimiter and not a data element; this field provides the delimiter used to separate repeated occurrences of a simple data element or a composite data structure; this value must be different than the data element separator, component element separator, and the segment terminator
- ^
- Repetition Separator
Code specifying the version number of the interchange control segments
- 00601
- Standards Approved for Publication by ASC X12 Procedures Review Board through October 2008
A control number assigned by the interchange sender
Code indicating sender's request for an interchange acknowledgment
- 0
- No Interchange Acknowledgment Requested
- 1
- Interchange Acknowledgment Requested (TA1)
Code indicating whether data enclosed by this interchange envelope is test, production or information
- I
- Information
- P
- Production Data
- T
- Test Data
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
- >
- Component Element Separator
Functional Group Header
To indicate the beginning of a functional group and to provide control information
Code identifying a group of application related transaction sets
- FA
- Functional or Implementation Acknowledgment Transaction Sets (997, 999)
Code identifying party sending transmission; codes agreed to by trading partners
Code identifying party receiving transmission; codes agreed to by trading partners
Date expressed as CCYYMMDD where CC represents the first two digits of the calendar year
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Assigned number originated and maintained by the sender
Code identifying the issuer of the standard; this code is used in conjunction with Data Element 480
- T
- Transportation Data Coordinating Committee (TDCC)
- X
- Accredited Standards Committee X12
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
- 006010
- Standards Approved for Publication by ASC X12 Procedures Review Board through October 2008
Heading
Transaction Set Header
To indicate the start of a transaction set and to assign a control number
- These acknowledgments shall not be acknowledged, thereby preventing an endless cycle of acknowledgments of acknowledgments. Nor shall a Functional Acknowledgment be sent to report errors in a previous Functional Acknowledgment.
- There is only one Functional Acknowledgment Transaction Set per acknowledged functional group.
- Only one acknowledgement, either a single Transaction Set 997 or a single Transaction Set 999, should be generated for a functional group unless mutually agreed upon.
Code uniquely identifying a Transaction Set
- The transaction set identifier (ST01) is used by the translation routines of the interchange partners to select the appropriate transaction set definition (e.g., 810 selects the Invoice Transaction Set).
- 997
- Functional Acknowledgment
Functional Group Response Header
To start acknowledgment of a functional group
- AK1 is used to respond to the functional group header and to start the acknowledgment for a functional group. There shall be one AK1 segment for the functional group that is being acknowledged.
- The Functional Acknowledgement is generated at the point of translation, intended for the originator (not any intermediate parties).
- The Functional Group Header Segment (GS) is used to start the envelope for the Functional Acknowledgment Transaction Sets. In preparing the functional group of acknowledgments, the application sender's code and the application receiver's code, taken from the functional group being acknowledged, are exchanged; therefore, one acknowledgment functional group responds to only those functional groups from one application receiver's code to one application sender's code.
Code identifying a group of application related transaction sets
- AK101 is the functional ID found in the GS segment (GS01) in the functional group being acknowledged.
- AG
- Application Advice (824)
- CD
- Credit/Debit Adjustment (812)
- IA
- Air Freight Details and Invoice (110, 980)
- IN
- Invoice Information (810)
- PO
- Purchase Order (850)
- RA
- Payment Order/Remittance Advice (820)
- SC
- Price/Sales Catalog (832)
- SH
- Ship Notice/Manifest (856)
Assigned number originated and maintained by the sender
- AK102 is the functional group control number found in the GS segment in the functional group being acknowledged.
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
- AK103 is the version release industry identifier code in the GS segment (GS08) in the functional group being acknowledged.
Transaction Set Response Header
To start acknowledgment of a single transaction set
- AK2 is used to start the acknowledgment of a transaction set within the received functional group. The AK2 segments shall appear in the same order as the transaction sets in the functional group that has been received and is being acknowledged.
Code uniquely identifying a Transaction Set
- AK201 is the transaction set ID found in the ST segment (ST01) in the transaction set being acknowledged.
- 810
- Invoice
- 812
- Credit/Debit Adjustment
- 820
- Payment Order/Remittance Advice
- 832
- Price/Sales Catalog
- 850
- Purchase Order
- 855
- Purchase Order Acknowledgment
- 856
- Ship Notice/Manifest
Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set
- AK202 is the transaction set control number found in the ST segment in the transaction set being acknowledged.
Transaction Set Response Trailer
To acknowledge acceptance or rejection and report errors in a transaction set
Functional Group Response Trailer
To acknowledge acceptance or rejection of a functional group and report the number of included transaction sets from the original trailer, the accepted sets, and the received sets in this functional group
Code indicating accept or reject condition based on the syntax editing of the functional group
- If AK901 contains the value "A" or "E", then the transmitted functional group is accepted.
- A
- Accepted
- R
- Rejected
Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element
Number of Transaction Sets received
Transaction Set Trailer
To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
Total number of segments included in a transaction set including ST and SE segments
Functional Group Trailer
To indicate the end of a functional group and to provide control information
Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element
Interchange Control Trailer
To define the end of an interchange of zero or more functional groups and interchange-related control segments
Stedi is a registered trademark of Stedi, Inc. All names, logos, and brands of third parties listed on this page are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.