X12 860 Purchase Order Change Request - Buyer Initiated
This Draft Standard for Trial Use contains the format and establishes the data contents of the Purchase Order Change Request - Buyer Initiated Transaction Set (860) for use within the context of an Electronic Data Interchange (EDI) environment. The transaction set can be used to provide the information required for the customary and established business and industry practice relative to a purchase order change. This transaction can be used: (1) by a buyer to request a change to a previously submitted purchase order or (2) by a buyer to confirm acceptance of a purchase order change initiated by the seller or by mutual agreement of the two parties.
- ~ Segment
- * Element
- > Component
- None included
Interchange Control Header
To start and identify an interchange of zero or more functional groups and interchange-related control segments
Code to identify the type of information in the Authorization Information
- 00
- No Authorization Information Present (No Meaningful Information in I02)
Information used for additional identification or authorization of the interchange sender or the data in the interchange; the type of information is set by the Authorization Information Qualifier (I01)
Code to identify the type of information in the Security Information
- 00
- No Security Information Present (No Meaningful Information in I04)
This is used for identifying the security information about the interchange sender or the data in the interchange; the type of information is set by the Security Information Qualifier (I03)
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the sender for other parties to use as the receiver ID to route data to them; the sender always codes this value in the sender ID element
Qualifier to designate the system/method of code structure used to designate the sender or receiver ID element being qualified
Identification code published by the receiver of the data; When sending, it is used by the sender as their sending ID, thus other parties sending to them will use this as a receiving ID to route data to them
Code to identify the agency responsible for the control standard used by the message that is enclosed by the interchange header and trailer
- U
- U.S. EDI Community of ASC X12, TDCC, and UCS
This version number covers the interchange control segments
- 00401
- Draft Standards for Trial Use Approved for Publication by ASC X12 Procedures Review Board through October 1997
A control number assigned by the interchange sender
Code sent by the sender to request an interchange acknowledgment (TA1)
- 0
- No Acknowledgment Requested
- 1
- Interchange Acknowledgment Requested
Code to indicate whether data enclosed by this interchange envelope is test, production or information
- I
- Information
- P
- Production Data
- T
- Test Data
Type is not applicable; the component element separator is a delimiter and not a data element; this field provides the delimiter used to separate component data elements within a composite data structure; this value must be different than the data element separator and the segment terminator
- >
- Component Element Separator
Functional Group Header
To indicate the beginning of a functional group and to provide control information
Code identifying a group of application related transaction sets
- PC
- Purchase Order Change Request - Buyer Initiated (860)
Code identifying party sending transmission; codes agreed to by trading partners
Code identifying party receiving transmission. Codes agreed to by trading partners
Time expressed in 24-hour clock time as follows: HHMM, or HHMMSS, or HHMMSSD, or HHMMSSDD, where H = hours (00-23), M = minutes (00-59), S = integer seconds (00-59) and DD = decimal seconds; decimal seconds are expressed as follows: D = tenths (0-9) and DD = hundredths (00-99)
Assigned number originated and maintained by the sender
Code used in conjunction with Data Element 480 to identify the issuer of the standard
- T
- Transportation Data Coordinating Committee (TDCC)
- X
- Accredited Standards Committee X12
Code indicating the version, release, subrelease, and industry identifier of the EDI standard being used, including the GS and GE segments; if code in DE455 in GS segment is X, then in DE 480 positions 1-3 are the version number; positions 4-6 are the release and subrelease, level of the version; and positions 7-12 are the industry or trade association identifiers (optionally assigned by user); if code in DE455 in GS segment is T, then other formats are allowed
- 004010
- Draft Standards Approved for Publication by ASC X12 Procedures Review Board through October 1997
Heading
Transaction Set Header
To indicate the start of a transaction set and to assign a control number
Code uniquely identifying a Transaction Set
- The transaction set identifier (ST01) used by the translation routines of the interchange partners to select the appropriate transaction set definition (e.g., 810 selects the Invoice Transaction Set).
- 860
- Purchase Order Change Request - Buyer Initiated
Beginning Segment for Purchase Order Change
To indicate the beginning of the Purchase Order Change Transaction Set and transmit identifying numbers and dates
When BCH 01 = “01” (Cancel), no POC (Line Item) segments will be sent.
When BCH 01 = “04” (Change), all POC (line Item) segments will be sent.
Code identifying purpose of transaction set
- 01
- Cancellation
- 04
- Change
Code specifying the type of Purchase Order
- DR
- Direct Ship
Ship to Store
- DS
- Dropship
Ship to Customer
- NE
- New Order
Replenishment Order. used for restocking orders.
- OS
- Special Order
- ZZ
- Mutually Defined
Cross Docking
Identifying number for Purchase Order assigned by the orderer/purchaser
Number assigned by the orderer identifying a specific change or revision to a previously transmitted transaction set
Date expressed as CCYYMMDD
- BCH06 is the date assigned by the purchaser to purchase order.
Future Use: The original PO date.
Current Use: The 860 message creation date expressed as YYYYMMDD.
Currency
To specify the currency (dollars, pounds, francs, etc.) used in a transaction
Code identifying an organizational entity, a physical location, property or an individual
- BY
- Buying Party (Purchaser)
Reference Identification
To specify identifying information
Code qualifying the Reference Identification
- 8X
- Transaction Category or Type
When REF01 = 8X, REF02 indicates whether backorder is allowed based on the following descriptions:
- SHIP OR BACKORDER
- SHIP OR CANCEL
- CR
- Customer Reference Number
If included, Customer Reference Number is an internal reference number associated with Advance Auto Parts application processes and can be ignored by our vendors.
- VT
- Motor Vehicle ID Number
VIN
- WO
- Work Order Number
Number assigned for work including material and labor beyond normal work required to fulfill a service order.
If used, AAP will populate with WEB Order Number. - ZZ
- Mutually Defined
If used, AAP will populate with Vehicle Mileage.
Administrative Communications Contact
To identify a person or office to whom administrative communications should be directed
Code identifying the major duty or responsibility of the person or group named
- BC
- Broker Contact
- BD
- Buyer Name or Department
Code identifying the type of communication number
- EM
- Electronic Mail
F.O.B. Related Instructions
To specify transportation instructions relating to shipment
Code identifying payment terms for transportation charges
- FOB01 indicates which party will pay the carrier.
- CC
- Collect
- DF
- Defined by Buyer and Seller
- PP
- Prepaid (by Seller)
Terms of Sale/Deferred Terms of Sale
To specify terms of sale
Code identifying type of payment terms
- If the code in ITD01 is "04", then ITD07 or ITD09 is required and either ITD10 or ITD11 is required; if the code in ITD01 is "05", then ITD06 or ITD07 is required.
- ZZ
- Mutually Defined
Date/Time Reference Delivery Requested
To specify pertinent dates and times
Date/Time Reference Ship No Later
To specify pertinent dates and times
Code specifying type of date or time, or both date and time
Only AAP can update the dates listed on the original PO.
- 038
- Ship No Later
Used to define window for replenishment orders.
Date/Time Reference Ship Not Before
To specify pertinent dates and times
Code specifying type of date or time, or both date and time
Only AAP can update the dates listed on the original PO.
- 037
- Ship Not Before
Used to define window for replenishment orders.
Reference Identification
To transmit identifying information as specified by the Reference Identification Qualifier
Code qualifying the Reference Identification
- ZZ
- Mutually Defined
Message Text
To provide a free-form format that allows the transmission of text information
Name
To identify a party by type of organization, name, and code
Code identifying an organizational entity, a physical location, property or an individual
All N1 segments sent on the Purchase Order Change must also appear on all response documents sent to AAP.
- BT
- Bill-to-Party
- SF
- Ship From
- ST
- Ship To
Required
- VN
- Vendor
Required
- Z7
- Mark-for Party
The party for whom the needed material is intended.
Code designating the system/method of code structure used for Identification Code (67)
- 91
- Assigned by Seller or Seller's Agent
- 92
- Assigned by Buyer or Buyer's Agent
Code identifying a party or other code
- This segment, used alone, provides the most efficient method of providing organizational identification. To obtain this efficiency the "ID Code" (N104) must provide a key to the table maintained by the transaction processing party.
Additional Name Information
To specify additional names or those longer than 35 characters in length
Address Information
To specify the location of the named party
Address Information is required for Ship To and optional for other occurrences.
Geographic Location
To specify the geographic place of the named party
Address Information is required for Ship To and optional for other occurrences.
Free-form text for city name
- A combination of either N401 through N404, or N405 and N406 may be adequate to specify a location.
Code (Standard State/Province) as defined by appropriate government agency
- N402 is required only if city name (N401) is in the U.S. or Canada.
Code defining international postal zone code excluding punctuation and blanks (zip code for United States)
Detail
Line Item Change
To specify changes to a line item
When BCH 01 = "01" (Cancel), no POC (Line Item) segments will be sent.
When BCH 01 = "04" (Change), all POC (line Item) segments will be sent.
Alphanumeric characters assigned for differentiation within a transaction set
- POC01 is the purchase order line item identification.
AAP populates with PO line number. PO line number must be returned on corresponding EDI documents sent to AAP.
Code specifying the type of change to the line item
- AI
- Add Additional Item(s)
- CA
- Changes To Line Items
- DI
- Delete Item(s)
- NC
- Concurrent Item (No Change)
Quantity ordered
AAP requires an integer value in this quantity element, unless a decimal value was present on the purchase order line item quantity.
Quantity left to receive as qualified by the unit of measure
AAP will populate with Quantity ordered.
Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken
While any valid X12 code may be sent on a purchase order, AAP typically purchases in "EA" Each UOM. The UOM code matching the PO or PO Change if one exists, must be returned on corresponding EDI documents sent to AAP.
Price per unit of product, service, commodity, etc.
Code identifying the type of unit price for an item
- TE
- Contract Price per Each
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- BP
- Buyer's Part Number
Identifying number for a product or service
Code identifying the type/source of the descriptive number used in Product/Service ID (234)
- VP
- Vendor's (Seller's) Part Number
Product/Item Description
To describe a product or process in coded or free-form format
Code indicating the format of a description
- If PID01 equals "F", then PID05 is used. If PID01 equals "S", then PID04 is used. If PID01 equals "X", then both PID04 and PID05 are used.
- F
- Free-form
Summary
Transaction Totals
To transmit a hash total for a specific element in the transaction set
- Number of line items (CTT01) is the accumulation of the number of POC segments.
If used, hash total (CTT02) is the sum of the value of quantities ordered (POC03) for each POC segment.
Total number of line items in the transaction set
Sum of values of the specified data element. All values in the data element will be summed without regard to decimal points (explicit or implicit) or signs. Truncation will occur on the left most digits if the sum is greater than the maximum size of the hash total of the data element.
-.0018 First occurrence of value being hashed.
.18 Second occurrence of value being hashed.
1.8 Third occurrence of value being hashed.
18.01 Fourth occurrence of value being hashed.
1855 Hash total prior to truncation.
855 Hash total after truncation to three-digit field.
Transaction Set Trailer
To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments)
Total number of segments included in a transaction set including ST and SE segments
Functional Group Trailer
To indicate the end of a functional group and to provide control information
Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element
Interchange Control Trailer
To define the end of an interchange of zero or more functional groups and interchange-related control segments
Stedi is a registered trademark of Stedi, Inc. All names, logos, and brands of third parties listed on this page are trademarks of their respective owners (including “X12”, which is a trademark of X12 Incorporated). Stedi, Inc. and its products and services are not endorsed by, sponsored by, or affiliated with these third parties. Use of these names, logos, and brands is for identification purposes only, and does not imply any such endorsement, sponsorship, or affiliation.